• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.259-268
• /
• 2005

In order to analyze the sheet drawability, the measurement of the plastic strain ratio was carried out for the 5182 aluminum alloy sheets in which were cold rolled without lubrication and subsequent recrystallization annealing. The average plastic strain ratio of the 5182 aluminum sheets was 1.50. It was considered that the higher plastic strain ratio was resulted from the ND//<111> component evolved during rolling and maintained during annealing. The AA5182/polypropylene/AA5182 (AA/PP/AA) sandwich sheets of the 5182 aluminum alloy skin sheet and the polypropylene core sheet with high formability have been developed for application for automotive body panels in future light weight vehicles with significant weight reduction. The AA/PP/AA sandwich sheets were fabricated by the adhesion of the core sheet and the upper and lower skin sheets. The AA/PP/AA sandwich sheet had high plastic strain ratio (1.58), however, the planar anisotropy of the sandwich sheet was little changed after fabrication. The optimum combination of directionality of the upper and lower skin sheets having high plastic strain ratio and low planar anisotropy was calculated theoretically and an advanced process for producing the sandwich sheets with high plastic strain ratio was proposed. The developed sandwich sheets have a high average plastic strain ratio of 1.55 and a low planar anisotropy of 0.17, which was improved more by 3.2 times than that of 5182 aluminum single sheet.

• Transactions of Materials Processing
• /
• v.20 no.1
• /
• pp.64-72
• /
• 2011

In this study, we have investigated bonding of metal and plastic parts with single planar interface. This is facilitated by surface processing of aluminum sheet, which consists of slitting and punching, followed by insert-molding of polybuthylelne terephthalate(PBT). An injection mold has been built to fabricate specimen. After processing of the specimen, tensile and bending shear adhesion tests have been fulfilled according to KS M3734 and KS M3723, respectively. We also have conducted simulation of tensile and bending shear adhesion tests. Based on the tests results, the proposed bonding method outperforms existing methods based on adhesion.

• Journal of Welding and Joining
• /
• v.17 no.2
• /
• pp.61-65
• /
• 1999

Because of the need for packages which accommodate high pin count, high density and high speed device, PBGA(plastic ball grid array) package gets more spotlight. But the substrate material which is used for PBGA package is in nature susceptible to moisture penetration. The objective of the study is to find out the path of delamination in the stacked structure of substrate. To increase the adhesion between the cooper laminate and PSR(photo solder resist) which is the weakest part, experiments were performed by changing parameters of printing pre-treatment and post-treatment process. As a result of experiments, the factor effects on the adhesion between the cooper laminate and PSR is caused by all of the pre-treatment and post-treatment condition. A considerable change was observed depending on the amount of UV irradiation after thermal cure which is typical of printing post-treatment condition rather than pre-treatment condition.

• Archives of Plastic Surgery
• /
• v.36 no.3
• /
• pp.247-253
• /
• 2009

Purpose: Hydroxyapatite(HA) has been widely used due to its chemical similarity to bone and good biocompatibility. HA is composed of macropores and micropores. Too much irregularities of the micropores are ineffective against the adhesion and proliferation of osteoblast. Many efforts have been tried to overcome these drawbacks. HA crystal coating on the irregular surface of HA scaffold, crystallized HA, is one of the method to improve cell adhesion. Meanwhile, the collagen has been incorporated with HA to create composite scaffold that chemically resembles the natural extracellular matrix components of bone. The authors proposed to examine the effect of collagen - coated crystallized HA on the adhesion and proliferation of osteoblast. Method: HA powder containing $10{\mu}m$ pore size was manufactured as 1 cm pellet size. For the making crystallized HA, 0.1 M EDTA solution was used to dissolve HA powder and heated $100^{\circ}C$ for 48 hours. Next, the crystallized HA pellets were coated with collagen (0.1, 0.5, and 1%). The osteoblasts were seeded into HA pellets and incubated for the various times (1, 5, and 9 days). After the indicating days, methylthiazol tetrazolium (MTT) assay was performed for cell proliferation and alkaline phosphatase (ALP) activty was measured for bone formation. Result: In SEM study, the surface of crystallized HA pellet was more regular than HA pellet. MTT assay showed that the proliferation of osteoblasts increased in a collagen dose - dependent and time - dependent manner and had a maximum effect at 1% collagen concentration. ALP activity also increased in a collagen dose - dependent manner and had a highest effect at 1% collagen concentration. Conclusion: These data showed that crystallization and collagen coating of HA was effective for osteoblast proliferation and ALP activity. Therefore, our results suggest that crystallized - HA scaffold with collagen coating is may be a good strategy for tissue engineering application for bone formation.

• Archives of Plastic Surgery
• /
• v.42 no.2
• /
• pp.232-239
• /
• 2015

A foreign body granuloma is a non-allergic chronic inflammatory reaction that is mainly composed of multinucleated giant cells. Foreign body granulomas may occur after the administration of any dermal filler. Factors such as the volume of the injection, impurities present in the fillers, and the physical properties of fillers affect granuloma formation. The formation of granulomas involves five phases: protein adsorption, macrophage adhesion, macrophage fusion, and crosstalk. The clinical and pathologic features of granulomas vary depending on the type of filler that causes them. Foreign body granulomas can be treated effectively with intralesional corticosteroid injections. Surgical excisions of granulomas tend to be incomplete because granulomas have ill-defined borders and moreover, surgical excisions may leave scars and deformities.

• Archives of Plastic Surgery
• /
• v.33 no.2
• /
• pp.245-248
• /
• 2006

Besides gastric pull-up or colonic interposition, microvascular technique in esophageal reconstruction has been approved reliable methods. When free intestinal transfer is considered, jejunal free flap is commonly used. We treated the patient who had undergone reconstruction with a right colon interposition and suffered from inability of swallowing because of stricture and necrosis of the interposed flap. Although we have planned jejunal free transfer, we couldn't use jejunum due to adhesion by previous gastrojejunostomy and colon interposition. Salvage procedure with microvascualr free left colon flap was executed successfully. After 9 month follow-up, the patient was able to consume a normal diet.

• Rubber Technology
• /
• v.7 no.1
• /
• pp.8-16
• /
• 2006

Plastic/rubber blends are ultrasonically treated during continuous extrusion in order to investigate the in-situ compatibilization of the blends without any chemicals. The mechanical properties of each blend were significantly improved by ultrasonic treatment. It is believed that ultrasonic treatment of the blends enhances intermolecular interaction, improves adhesion at the interface and creates copolymers during very short time. The created copolymers are believed to be a major reason for enhancing mechanical properties of the blends by in-situ compatibilization during extrusion. This process can be applied fur preparing plastic/rubber blends to make thermoplastic elastomers or plastic/plastic and rubber/rubber blends, and for making novel copolymers from practically any pairs of existing polymers to achieve desirable chemical and physical properties.

• The korean journal of orthodontics
• /
• v.52 no.4
• /
• pp.278-286
• /
• 2022

Objective: To evaluate differences in the adhesion levels of the most common oral pathogens, Streptococcus mutans and Porphyromonas gingivalis, in human saliva-derived microcosm biofilms with respect to time and raw materials of orthodontic brackets. Methods: The samples were classified into three groups of bracket materials: 1) monocrystalline alumina ceramic (CR), 2) stainless steel metal (SS), and 3) polycarbonate plastic (PL), and a hydroxyapatite (HA) group was used to mimic the enamel surface. Saliva was collected from a healthy donor, and saliva-derived biofilms were grown on each sample. A real-time polymerase chain reaction was performed to quantitatively evaluate differences in the attachment levels of total bacteria, S. mutans and P. gingivalis at days 1 and 4. Results: Adhesion of S. mutans and P. gingivalis to CR and HA was higher than the other bracket materials (SS = PL < CR = HA). Total bacteria demonstrated higher adhesion to HA than to bracket materials, but no significant differences in adhesion were observed among the bracket materials (CR = SS = PL < HA). From days 1 to 4, the adhesion of P. gingivalis decreased, while that of S. mutans and total bacteria increased, regardless of material type. Conclusions: The higher adhesion of oral pathogens, such as S. mutans and P. gingivalis to CR suggests that the use of CR brackets possibly facilitates gingival inflammation and enamel decalcification during orthodontic treatment.

• Korean Journal of Materials Research
• /
• v.17 no.4
• /
• pp.215-221
• /
• 2007

The effect of $CF_4$ plasma treatment condition on the interfacial adhesion energy of inkjet printed Ag/polyimide system is evaluated from $180^{\circ}$ peel test by calculating the plastic deformation energy of peeled metal films. Interfacial fracture energy between Ag and as-received polyimide was 5.5 g/mm. $CF_4$ plasma treatment on the polyimide surface enhanced the interfacial fracture energy up to 17.6 g/mm. This is caused by the increase in the surface roughness as well as the change in functional group of the polyimide film due to $CF_4$ plasma treatment on the polyimide surface. Therefore, both the mechanical interlocking effect and the chemical bonding effect are responsible for interfacial adhesion improvement in ink jet printed Ag/polyimide systems.

• Journal of Adhesion and Interface
• /
• v.12 no.1
• /
• pp.11-15
• /
• 2011

In this study we synthesized low VOC-solvent soluble thermo plastic polyurethane, The effect of chain extender and NCO/OH ratio for properties of thermoplastic polyurethane was investigated. Also, we prepared low VOC-type primer by TPU and acrylic modified tackifier resin. When NCO/OH ratio was 2 or more, TPU was insoluble in low VOC solvent. And peel strength was higher value using polar type tackifier than non-ploar type tackifier.