• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.175-187
• /
• 2003

일반적으로 사질토 지반의 원형수직구에 설치된 흙막이벽에 작용하는 토압은 삼차원 아칭효과로 인하여 평면변형조건의 옹벽에 작용하는 토압과는 다르며, 원통형 벽체의 설계를 위해서는 벽체에 작용하는 토압의 정확한 산정이 필요하다. 원형수직구에 설치된 벽체 배면지반의 파괴모드는 지중응력상태에 의존하게 되는데, 파괴모드는 실질적으로 원기둥형 활동면을 갖는 경우와 깔대기형 파괴면을 갖는 경우로 구분할 수 있다. 기존의 연구결과에 의하면 각각의 파괴모드에 대하여 원통형 벽체에 작용하는 토압공식이 제안되었으나, 도입된 가정으로 인하여 불합리한 경향을 보이는 문제점이 있다. 본 연구에서는 원통형 벽체에 작용하는 토압을 산정하기 위하여 각각의 파괴모드에 대하여 제안된 토압공식을 살펴보고, 각 토압공식에서 가정된 사항을 수정 제안하였다. 각각의 파괴모드에 대하여 수정 제안된 토압공식들은 상재하중과 벽면마찰을 고려하였으며, 활동면에서의 힘의 평형관계를 실제적으로 고려하였다.

• 비파괴검사학회지
• /
• 제7권2호
• /
• pp.42-47
• /
• 1988

이상의 결과를 요약하면 다음과 같다. 1) 초음파 C-scan 법에 의하여 층간분리, 기지균열 등의 손상 정도, 크기 및 형태의 판별이 가능하며 충격손상은 주로 섬유의 주축방향으로 성장한다. 2) 복합재료의 인장파괴시 적층구조에 따라 상이한 AE 양상을 나타내며 이 원인은 파괴 mode의 차이에 기인한다. 3) 섬유의 파단은 기지파단의 경우 보다 강력한 AE activity를 나타내며 peak amplitude의 분포를 분석하여 파괴 mode의 해석이 가능하다. 4) 복합재료의 파괴강도는 적층구조, 충격 손상 등에 영향을 받으며 응력파 계수(SWF)의 측정에 의해 정성적 평가가 가능하다.

• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.705-707
• /
• 2010

Purpose: Tuberculous lymphadenitis constitutes about 30% of all types of extrapulmonary tuberculosis. Cervical lymphadenitis is the commonest form (70%), followed by axillary and inguinal. But inguinal tuberculous lymphadenitis is rare form. Especially isolated inguinal tuberculous lymphadenitis was seldom reported. In Korea, that case was not reported. This case emphasizes the need for awareness of tuberculosis as a possible cause of isolated inguinal adenitis. Methods: We experienced one case of isolated inguinal tuberculous lymphadenitis. We analyzed clinical features, preoperative assessments and method of treatments. Results: A 37-year-old female patient presented with a painless swelling in the left inguinal region of 12 month's duration. There was no history of urethral discharge, dysuria, genital sores, unprotected sexual contacts or trauma. Examination revealed enlarged left inguinal lymph nodes, $2{\times}1\;cm$, non-tender and firm mass. The external iliac, popliteal, right inguinal and other groups of lymph nodes were normal. Serologic tests, urinary tests and chest radiologic test were normal. The excision of mass was performed under the general anesthesia. A excisional biopsy showed chronic granulomatous inflammation with caseous necrosis, consistent with tuberculosis. After excision, the primary repair was done and completely healed on postoperative 25 days. Conclusion: The isolated inguinal tuberculous lymphadenitis was rare form of inguinal suppurative mass. Although medical management is the principal mode of therapy of tuberculous adenitis and surgery is rarely necessary, we didn't consider the possibility of tuberculous lymphadenitis in our case. A high index of suspicion is essential for a diagnosis of isolated inguinal tuberculous lymphadenitis. Our case emphasizes this importance and illustrates the need for awareness of tuberculosis as a possible cause of isolated inguinal adenitis.

• 한국지반공학회논문집
• /
• 제24권8호
• /
• pp.99-109
• /
• 2008

본 연구는 군산 새만금지역의 점성토를 소성지수 15%, 30%, 45%, 60%가 되도록 벤초나이트를 첨가한 인공의 시료를 이용하여 하중재하기간을 1일, 2일, 4일, 8일 등으로 달리한 표준압밀시험을 실시하였다. 그리고 인천, 광양, 울산지역의 불교란 시료에 대한 압밀시험도 같이 수행하여 소성지수와 압밀하중재하기간이 2차 압밀에 어떤 영향이 있는지를 밝혔다. 그리고 각 소성지수에 따른 하중과 침하특성, 압밀계수특성, 압축지수 및 2차 압축지수특성, 간극수압특성을 밝히고 압축지수, 압밀계수, 2차 압축지수 등을 소성지수, 하중에 관하여 정식화하였다. 또한 정식화한 식을 이용한 1차 및 2차 압밀침하량 예측결과와 탄소성 구성모델인 수정 Cam-Clay모델과 탄 점소성 모델인 Sekiguchi모델을 이용한 예측결과를 모형시험 결과와 같이 비교하였다. 그 결과, 2차 압밀특성을 고려한 Sekiguchi모델이 매우 정도 높게 결과를 예측할 수 있음을 알 수 있었다.

• 한국전산구조공학회논문집
• /
• 제20권3호
• /
• pp.353-364
• /
• 2007

이 논문에서는 원전 격납건물의 극한내압능력 및 파괴모드 평가를 위해 개발된 비선형 유한요소해석 프로그램 NUCAS 코드에 대하여 기술하였다. NUCAS는 미시적인 재료모델을 도입한 퇴화 쉘 요소와 탄소성 재료모델을 도입한 저차고체요소로 구성되어 있고, 퇴화 쉘 요소와 저차고체요소는 유한요소에서 발생할 수 있는 강성과대(overstiffness) 및 묶임현상(locking phenomenon)을 방지하기 위해서 각각 가변형도법(assumed strain method)과 개선된 가변형도법(enhanced assumed strain method)을 적용하였다. 개발된 NUCAS코드의 성능을 검증하기 위해서 다양한 철근콘크리트 구조물의 벤치마크 테스트를 수행하였고, 그 결과로부터 이 논문에서 개발한 유한요소해석 프로그램의 해석결과는 실험결과와 잘 일치하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제11권1호
• /
• pp.93-100
• /
• 1989

This is a report of comparison of condyle fracture treatment by functional treatment and surgical treatment. In cases of functional therapy, mode of action of Activator that we used; By fulcrum of posterior teeth, the mandibular elevators of the opposite side cause the gap in the dental arches to be reduced, while the mandible performs a rotational movement about the fulcrum during which the fracture surface of the large fragment moves downward. Condylar fractures are often seen in association with fractures of other regions of the mandible. In our department, such cases were treated by miniplate and intramaxillary fixation. Surgical treatment of fractures of the mandible condylar were treated by intraoral approach. The result were drawn as follows : 1. Lateral displacement of condyle ; functional therapy with activator. 2. Compound fracture ; miniplate osteosynthesis and physiotherapy. 3. Anteriormedially displacement ; surgical treatment.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.1048-1054
• /
• 1999

It is important to study the shielding effectiveness(SE) of reinforcing material of plastic composite materials against the electromagnetic(EM) waves. In this paper, SE of the shielding material of EM waves was investigated with actual experiments. The materials used in this study were made up of film, fiber and powder of conductive materials - Cu, Al, CF etc. Also, The resin film was used as matrix. The experiment was carried out by using a shielding evaluator(Shielding box) TR17302 with an ADVANTEST spectrum analyzer, model R3361C. It was found from the experimental results that copper, aluminum and carbon fiber were good candidates as a shielding material against the EM waves with increasing the SE as the composite was laminated. The characteristics of the SE against the EM waves depended on a mode of preparation of specimen. The effects of interval of wires on the SE were studied when the orientation and the space of Cu wires were changed. The SE strongly depended on the. orientation and the space of the Cu wire. SE decreased as the space of the Cu wires was increasing.

• 소성∙가공
• /
• 제14권8호통권80호
• /
• pp.718-724
• /
• 2005

An efficient finite element method has been introduced for analysis of metallic sandwich plates subject to bending moment. A full model 3-point bending FE-analysis shows that the plastic behavior of inner structures appears only at the load point. The unit structures of sandwich plates are defined to numerically calculate the bending stiffness and strength utilizing the recurrent boundary condition for pure bending analysis. The equivalent models with the same bending stiffness and strength of full models are then designed analytically. It is demonstrated that the results of both models are almost the same and the FE-analysis method incorporating the equivalent models can reduce the computation time effectively. The dominant collapse modes are face buckling and face yielding. Since the inner dimpled structures prevent face buckling, sandwich plates with inner dimpled shell structure can absorb more energy than other types of sandwich plates during the bending behavior.

• Steel and Composite Structures
• /
• 제12권5호
• /
• pp.395-412
• /
• 2012

The present work addresses the rotational capacity of steel-concrete composite beams, which is a key issue for the seismic design of composite frames. Several experimental tests from the literature are summarised, and the effects of various parameters on the available plastic rotation are discussed. Furthermore, a number of remarks are made regarding the need for supplementary experimental results. The authors carried out experimental tests on four composite beams in which the type, width and connection degree of the slab were varied. During the tests, the deflection and strains in the steel profiles and bars were measured and recorded, wherein the observed trends in the measured parameters indicated that the failure mode of the beam was influenced by global and local buckling. A comparison of the experimental results to the theoretical ultimate strengths and moment-curvature relationships confirms that buckling phenomena occurred after section yielding, even if a consistent plastic rotation developed. This rotational capacity is well evaluated by a formulation that is available in the literature.

• Structural Engineering and Mechanics
• /
• 제10권3호
• /
• pp.227-243
• /
• 2000

In a companion paper, tests on bolted side plated beams have shown that side plates can substantially increase the strength of existing reinforced concrete beams with little if any loss of ductility and, furthermore, induce a gradual mode of failure after commencement of concrete crushing. However, it was also shown that transverse interaction between the side plates and the reinforced concrete beam, that is vertical slip and which is a concept unique to side plated beams, is detrimental. Transverse interaction increases the forces on the bolt shear connectors and, hence, weakens the beam. It also reduces the ability of the composite plated beam to yield and, hence, to attain its full flexural capacity. The generic concept of transverse interaction will be described in this paper and the results used to develop a new form of rigid plastic analysis for bolted side plated beams which is illustrated with an application.