• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.743-746
• /
• 2000

Plastic microlenses play an important role in reducing the size, weight, and the cost of the systems in the fields of optical data storage and optical communication. In the present study, plastic microlens arrays were fabricated using micro-compression molding process. The design and fabrication procedures for mold insert were simplified by using silicon instead of metal. A simple but effective micro compression molding process, which uses polymer powder, were developed for microlens fabrication. The governing process parameters were temperature and pressure histories and the micromolding process was controlled such that the various defects developing during molding process were minimized. The radius and magnification ratio of the fabricated microlens were $125{\mu}m$ and over 3.0, respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.94-97
• /
• 2002

Micromolding methods are most suitable for mass production of plastic microlens and lens array with low cost. Among the procedures related with micromolding of microlens array, fabrication of mold insect which contains micro cavity of lens shape is the most important stage. In this study, nickel mold inserts for 45 $\mu\textrm{m}$ and 95 $\mu\textrm{m}$ diameters lens way were fabricated using electroforming process. The mother for metal mold inset was made using reflow method. A micro compression molding with polymer powders was used to test the qualities of the metal mold insets. Micro lens profile and surface roughness was measured by interferometric technique and AFM, respectively. The final molded lens replicated the mother well, and had good surface quality.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1242-1245
• /
• 2001

Plastic microlenses play an important role in reducing the size, weight, and the cost of the systems in the fields of optical data storage and optical communication. In the present study, plastic microlens arrays were fabricated using micro-compression molding process. The design and fabrication procedures for mold insert were simplified by using silicon instead of metal. A simple but effective micro compression molding process, which uses polymer powder, were developed for microlens fabrication. The governing process parameters were temperature and pressure histories and the micromolding process was controlled such that the various defects developing during molding process were minimized. The radius and magnification ratio of the fabricated microlens were 125$\mu\textrm{m}$ and over 3.0, respectively.

• Medical Lasers
• /
• 제9권2호
• /
• pp.179-183
• /
• 2020

The picosecond laser has been widely used to remove tattoos, and improve wrinkles, acne scarring, and pigmented scars. This study was performed to investigate the efficacy and safety of a 1,064-nm fractional picosecond laser treatment for depressed traumatic scars. A total of twenty Korean patients with depressed scars were treated with a 1,064-nm fractional picosecond laser at a two-week interval with a spot size of 3 mm, fluence of 3.5 to 5.5 J/cm², and frequency of 2 Hz with a combination of microlens arrays. At 4 weeks after the final treatment, there was a statistically significant improvement in the modified Vancouver Scar Scale (mVSS) and the patient satisfaction score without any significant complication. A 1,064-nm fractional picosecond laser treatment is a safe and effective method to improve traumatic wound scars with depression.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3316-3318
• /
• 1999

PMMA(poly-methyl methacrylate) microlens array is fabricated using transparent acrylic resin. PMMA is commonly used material for plastic lens due to its excellent visibility larger than 90% and other optical characteristics so much close to those of glass. Orthodontic resin (DENTSPLY International Inc.), commonly used in dentistry, is an transparent acrylic resin kit including MMA liquid and polymerization powder. Their mixture results in PMMA through polymerization. Using the resin PMMA layer is formed on the substrate through spin-coating. Designed pattern of lens structure is transferred to PMMA layer by RIE (Reactive Ion Etching) with oxygen plasma. Final lens shape is formed by thermal treatment that causes PMMA to reflow, The thickness of PMMA spun on the substrate is $17{\mu}m$ that is also final sag of microlens, Designed diameters of the microlenses are $200{\mu}m$, $300{\mu}m$,and $500{\mu}m$, respectively.

• 청정기술
• /
• 제11권4호
• /
• pp.205-211
• /
• 2005

마이크로렌즈 어레이의 제작은 매우 다양한 재료와 방법이 제안되어 지고 있으나, 폴리머를 이용한 사출법은 광학적 특성, 내충격성, 가공성, 경량화 및 환경친화성 등의 장점으로 주목 받고 있다. 사출법 템플레이트를 제작하기 위한 PR(Photo-Resist) reflow법은 형상제어가 용이하고 대량생산과 정밀가공의 측면에서 효율적이어서, 집적화가 용이하고 공정을 줄일 수 있는 장점을 갖게 되어 매우 환경친화적이다. 그러나 마이크로렌즈 어레이의 사출성형은 사용되는 폴리머재료의 성질에 따라 성형에 어려움이 있는 것으로 알려져 있다. 본 연구에서는 이와 같은 성형의 어려움을 극복하기 위한 방법으로 급가열/급냉각 사출을 통하여 마이크로렌즈 어레이를 제작하고 특성을 이해하였다. 템플레이트의 급격한 온도상승과 고온에서의 모양이 냉각으로 인한 변형이 없도록 급속히 냉각시켜 줌으로서 마이크로렌즈 어레이의 사출성형을 구현 하였다. PC(Poly-Cabon ate)와 PMMA(Poly-Methyl-Meth-Acrylate)를 비교하여, PMMA가 낮은 용융점에 의해 성형성이 우수함을 확인하였다. 사출시 압력과 속도를 변수로 마이크로렌즈 어레이의 제작을 위한 사출조건을 도출하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.200-203
• /
• 2001

Micromolding methods such as micro-injection molding and micro-compression molding are most suitable for mass production of plastic micro-optics with low cost. In this study, plastic micro-optical components, such as refractive microlenses and diffractive optical elements(DOEs) with various grating patterns, were fabricated using micro-compression molding process. The mold inserts were made by ultrapricision mechanical machining and silicon etching. A micro compression molding system was designed and developed. Polymer powders were used as molded materials. Various defects found during molding were analyzed and the process was optimized experimentally by controlling the governing process parameters such as histories of mold temperature and compression pressure. Mim lenses of hemispherical shape with $250{\mu}m$ diameter were fabricated. The blazed and 4 stepped DOEs with $24{\mu}m$ pitch and $5{\mu}m$ depth were also fabricated. Optical and geometrical properties of plastic molded parts were tested by interferometric technique.

• Medical Lasers
• /
• 제8권1호
• /
• pp.19-23
• /
• 2019

Background and Objectives The picosecond 755 nm alexandrite laser was first approved by the US FDA in 2012. A previous study described the use of a 1,064 nm picosecond laser with a micro-lens array (MLA) in peri-areolar scarring from breast reconstruction surgery and reported significant improvement in the texture and aesthetic appearance of the scar without other wound complications. The purpose of this study was to evaluate the improvement of overall scarring, not just pigmentation, in the picosecond laser treatment of patients with pigmentations. Materials and Methods Sixteen patients who underwent 1,064 nm picosecond laser treatment from June 2016 to December 2018 were enrolled in this study. Patients received two to six sessions of picosecond laser treatment at intervals of 4 weeks. Before and after the laser treatment, the patients evaluated their own satisfaction score and a physician evaluated the Vancouver Scar Scale. To evaluate the satisfaction score and complication rate, a retrospective chart review was done. Results Seven were female and nine were male. The mean of the patients' satisfaction score before the treatment was 1.44 (interquartile range [IQR], 1-2) and 3.00 (IQR 2.25-3.75) six months after treatment. The mean of the Vancouver Scar Scale before the treatment was 9.69 (IQR 8-11), and 6.25 (IQR 5-7.75) six months after treatment. All the results were statistically significant (p<0.01). Conclusion This study provides evidence that the use of a 1,064 nm picosecond laser treatment for pigmented scars can be effective in improving the pigmentation and overall scar status, including vascularity, height, and pliability, with the results of a decrease in the VSS scores between treatments.