• 한국강구조학회 논문집
• /
• 제19권2호
• /
• pp.171-179
• /
• 2007

본 논문은 유전자 알고리즘을 근거한 이산최적설계 알고리즘에 의한 온실구조용 최적설계 프로그램을 개발하였다. 최적기법은 이산화 최적기법에 효과적인 유전자알고리즘을 근거로 하였다.본 연구에서 목적함수는 온실 구조물의 중량이고, 제약조건식은 한계상태설계기준에 대한 설계 제한식이다. 설계변수는 KSD 3760 농업용 아연도강관이다. 온실구조의 경제적인 구조설계나 안정성평가에 대한 기준을 제시하고자 하였다. 또한 온실구조자재의 표준화 및 규격화연구에 기여하고자 하였다. 본 연구의 유전자 알고리즘에 의한 온실구조용 이산화 최적설계 프로그램의 적용을 위해 설계 예를 들었다.

• 한국농공학회지
• /
• 제44권4호
• /
• pp.107-113
• /
• 2002

The pipe framed and arch shape plastic greenhouse, which is the most popular greenhouse in Korea, is relatively weak in snowdrift. Reinforcement of rigid frame or column is required to reduce the damage from heavy snow in this type. But additional rigid frames or columns decrease light transmissivity or workability, and increase construction cost. So it is desirable to prepare some temporary poles and to install them when the warning of heavy snow is announced. This study was carried out to develop the temporary pole supporting system using galvanized steel pipes for plastic housing and to evaluate the safe snow load on a temporary pole. A pipe connector, which is inserted in the top of pipe used in the temporary pole and supports the center purline, was designed and manufactured to be able to carry the upper loads safely. And a bearing plate was safely designed and manufactured in order to carry the loads acting on it to the ground. When temporary poles of ${\phi}$ 25 pipe are installed at 2.4m interval, it shows that the single span plastic greenhouses with 5~7 m width are able to support the additional snow depth of 13.9~25.3 cm beyond the snow load supported by main frame.

• 농업과학연구
• /
• 제41권3호
• /
• pp.251-258
• /
• 2014

In order to set up the basic environmental control systems which the new concept greenhouses have to equip, greenhouse characteristics, environmental management and control systems in domestic glasshouses and plastic houses were investigated and analyzed comparatively. Survey results on the width, length, eaves height, and the number of spans etc. showed that glasshouses were bigger than plastic houses significantly. New concept greenhouses claim to be plastic houses, but it will be reasonable to follow the specifications of the glasshouse. Specifications to be applied to new concept greenhouses were proposed as follows; hot water heating systems, aluminum screens as the thermal curtain, evaporative cooling systems, roof vents on the ridge, circulation fans, $CO_2$ enrichment, hydroponic systems, and automatic irrigation control systems. Environmental measurement systems for the indoor and outdoor temperature, humidity, light, wind speed and indoor $CO_2$ concentration have to be fully equipped. The automatic control system has to be as a complex environmental control system, not a single item control system. Also, for stable dissemination, domestically producing complete greenhouse control system should be made as soon as possible.

• 한국지역사회생활과학회지
• /
• 제21권4호
• /
• pp.551-558
• /
• 2010

It is a normal circumstance to have high temperature and high humidity in Greenhouses even though these climates are changed by the area, season, climates, the size of the greenhouse, and the crops being raised. Workers in the greenhouses have complained about their uncomfortable work environment and discomfort from the hot conditions, including sunburn. The farmers' ailments are not significantly different between those working in the in greenhouses and those working in the fields. The Farmers' syndrome was almost two times higher for women than those of men for greenhouse workers. This study was developed for functional fatigue clothes for plastic greenhouses which are known for high temperatures and humidity. The ergonomic function and thermal comforts of fatigue clothes were evaluated in the climatic chamber($30.0^{\circ}C$, 70.0%R.H.). The current fatigue clothes which are made of cotton or nylon were purchased at the market. The developed clothes are made of highly absorbent and high speed drying polyester. And these fabrics have excellent elasticity. In this study, the functional fatigue clothes were designed with longsleeved sport shirts and Full length pants. Tre, Tsk, Hcl, HR and the personal subjective sensations such as heat, humidity, and comfortableness were significantly lower when subjects wore the developed clothes made with polyester than the previous attire.

• 생물환경조절학회지
• /
• 제18권3호
• /
• pp.192-199
• /
• 2009

파프리카를 재배하는 농가에서는 생산성 증대를 위하여 비닐하우스 측고를 관행 3.0m에서 4.5m까지 높이고 있으나 이에 대한 구조안전성 검토 없이 시공이 이루어지고 있는 실정이다. 이 연구에서는 측고가 4.5m로 상승된 1-2W형 비닐하우스를 대상으로 풍속 $40m{\cdot}s^{-1}$, 적설심 40cm의 설계하중에 대하여 구조안전성 분석을 수행하고 적절한 구조보강방법을 제시하였다. 3차원 프레임해석을 이용하여 구조해석을 수행한 결과, 측면 방풍벽의 보강이 반드시 필요한 상태였으며 파프리카 작물하중으로 인하여 매우 취약해지는 중방의 보강이 요구되었다. 측면 보강 방법으로써는 외측 기둥과 방풍벽을 보강이음을 이용하며 서로 연결해주고, 외측 기둥 간격에 따라 방풍벽 부재를 보강하는 방법이 가장 효과가 큰 것으로 분석되었다. 중방의 경우 비닐하우스 폭의 $1/17{\sim}1/20$의 높이로 2중 중방구조를 만들고 그 사이를 사재로 연결하여 트러스 형태로 보강하는 방법이 가장 큰 효과를 보였다.

• 한국약용작물학회지
• /
• 제22권6호
• /
• pp.469-474
• /
• 2014

This study was performed to investigate the effects of sowing density and number of seeds sown on the emergence rate and growth characters of Panax ginseng C. A. Meyer under direct sowing cultivation in a blue plastic greenhouse. Ginseng seedlings, derived from seeds sown directly at different densities (90, 108, 135, and 162 seeds per $162m^2$), were cultivated in sandy loam soil within a blue plastic greenhouse. In contrast to the emergence rate, which decreased with an increase of sowing density, number of survival plant showed an increasing trend. Interestingly, the emergence and number of survival plant were significantly enhanced when 2 or 3 seeds were sown per hole compared with when one seed was sown per hole. Growth of the aerial parts of ginseng were not markedly influenced by sowing density or the number of seeds sown. However, chlorophyll content (SPAD values) increased with an increase in sowing density. Root parameters, such as root length, diameter, and weight, and the number of lateral roots decreased with an increase in sowing density, but were not noticeably influenced by the number of seeds sown. Total saponin content was the highest in the treatment plot containing 135 seeds. Similarly, the content of each ginsenoside was also tended to be higher in this treatment than in other treatment plots. On the basis of the results obtained in this study, it was possible to determine the optimal sowing density and seed number for the direct sowing cultivation of ginseng in blue plastic greenhouse.

• 생물환경조절학회지
• /
• 제5권2호
• /
• pp.174-186
• /
• 1996

This study was carried out in order to understand the plan, design, constructing and actual condition of management of modernized horticultural facilities in Kyungpook Province which had been constructed from 1992 to 1995 funded by Government support. The aim of this study is to provide reference data for success of the forth project. It was performed by making up a question about driving of project and management condition of equipment after constructing. The results obtained from this study are as follows: 1. 73.5% of facilities horticulture farmhouse recognized that the prospect of greenhouse is bright, but 92.5% of the farmhouse also recognised that they need technical consultation on protected horticulture farming. Therefore, technical educations would must be enhanced about foundation of greenhouse and cultivation technique. 2. The holding times of explanatory meetings, cause of understanding to farmhouse, were one or two times in greenhouse construction, and 62.5% of the farmhouse expressed the insufficiency at the explanation and educational data. For this reason, it was judged that the construction contract had been delayed more than 5 months in 49.3% of the farmhouse after the decision of project budget. 3. In constructing after a contract, the rates of construction delay is 53.4% and defect occurrence is 41.1%. The biggest reasons of construction delay was insufficiency of worker and materials supply. Each percentage is 29.1%. And the reason of defect occurrence is badness of machinery equipment(62.9% ). 4. In management of greenhouse, a pipe-constructed plastic film greenhouse changes plastic film every one and three years because of sticking dust on plastic film. It was needed to about in cleaning technique of coverings. Because that used 3-5 years only half of the expected life span. 5. The order of broken rating in the subsidiary equipment is like this lollop ventilator (42.8%), a general control system(33.3%) especially, in the case of a general control system, the rate of all family can control is 52.7%. so, it is time to develop easy control equipment which every one could use as soon as possible. 6. When choose heat generator as decide capacity, the most priority is the mount of heat generator the percent is 45.5% heat generator and as decide model, the private purchase's percent is 77.3%. It is higher than a public bidding heat generator the percent is 22.7% heat generator when it compare with a public bidding. In the case of $CO_2$ generator, using rate is only 19.0%. The using rate is very low, so it needs education how to use depends on the way of the subsidiary equipment. 7. In the case of seedlings, it is asked to use factory-processed seedling effectively. because it's difficult to get security of labors(58.8%), hoped crops (55.9%) access same crops(29.4%) much more and changing of crops depends on market situation. that is the main reason the lack of knowhow.

• 월간포장계
• /
• 통권259호
• /
• pp.106-109
• /
• 2014

• 한국농공학회지
• /
• 제24권4호
• /
• pp.109-115
• /
• 1982

• 한국공간구조학회지
• /
• 제21권2호
• /
• pp.4-11
• /
• 2021