• Biomolecules & Therapeutics
• /
• 제4권2호
• /
• pp.154-161
• /
• 1996

General pharmacological properties of LB-00014, an erythropoietin which was produced by recombinant DNA technique in Biotech Research Institute, LG Chemical Ltd. were examined. The administration of LB-00014 (60, 600, 6000 IU/kg, iv) in mice had no effect in general behavior and central nervous system, and no influences on normal body temperature, writhing syndromes induced by 0.7% acetic acid solution and chemoshock produced by strychnine and pentetrazole solution. LB-00014 (60, 600, 6000 IU/kg, iv) given to anesthetized rabbits showed no effect on blood pressure of carotid artery and respiration rates, and it did not influence the responses produced by injection of acetylcholine or epinephme. The administration of LB-00014 (601, 600, 6000 IU/kg, iv) in rats had no effect on the plasma prothrombin time, activated partial thromboplastin time and hemolytic action. The platelet aggregation induced by collagen in human plasma was not influenced by LB-00014 (10, 100, 1000 lU/kg, iv). It showed no direct effect at 100 and 1000IU/m1 in isolated stomach fundus and uterus of rats and ileum of guinea-pig, and it also had no inhibition of contraction produced by acetylcholine, oxytocin, serotonin and histamine in the above-mentioned preparations. It did not influence gastric secretion, pH and acid output at 6000 IU/kg, iv in rats, but showed a significant increase in intestinal propulsion of mice at 6000 IU/kg, iv. Its administration (60, 600, 6000 lU/kg, iv) caused no effect on urine and electrolyte excretion in rats. These results indicate that LB-00014 does not exsert any of serious pharmacological effects.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권4호
• /
• pp.538-546
• /
• 2008

Large-type goats eating dry forage secreted large volumes of saliva which resulted in the loss of $NaHCO_3$ from the blood and decreased plasma volume (hypovolemia). This research investigated whether or not the loss of $NaHCO_3$ from the blood and hypovolemia brought about by dry forage feeding actually depresses feed intake in large-type goats under free drinking conditions. The present experiment consisted of three treatments (NI, ASI, MI). All treatments in this experiment were carried out under free drinking conditions. In the NI control (NI), a solution was not infused. In the ASI treatment, i.v. infusion of artificial saliva was initiated 2 h before feeding and was continued for a total of 3 h concluding 1 h after the commencement of the feeding perod. In the MI treatment, mannitol solution was infused to replenish only water lost from the blood in the form of saliva. The hematocrit and plasma total protein concentrations during feeding in the NI control were observed to be higher than pre-feeding levels. This indicated that dry forage feeding-induced hypovolemia was caused by the accelerated secretion of saliva during the initial stages of feeding in freely drinking large-type goats. Increases in hematocrit and plasma total protein concentrations due to dry forage feeding were significantly suppressed by the ASI treatment. While hematocrit during feeding in the MI treatment was significantly lower than the NI control, plasma total protein concentrations were not different. From these results, it is clear that the MI treatment was less effective than the ASI treatment in mitigating the decreases in plasma volume brought about by dry forage feeding. This indicates that plasma volume increased during dry forage feeding in the ASI treatment which inhibited production of angiotensin II in the blood. The ASI treatment lessened the levels of suppression on dry forage feeding, but the MI treatment had no effect on it under free drinking conditions. The results indicate that despite the free drinking conditions, increases in saliva secretion during the initial stages of dry forage feeding in large-type goats caused $NaHCO_3$ to be lost from the blood into the rumen which in turn caused a decrease in circulating plasma volume and resulted in activation of the renin-angiotensin system and thus feeding was suppressed.

• 한국전자파학회논문지
• /
• 제19권5호
• /
• pp.556-561
• /
• 2008

시간 지연이나 위상 지연과 같은 레이다 기법을 기반으로 하는 마이크로파 reflectometry를 비균질 매질의 밀도 특성을 조사하기 위한 비파괴 검사 장치로 응용하기 위한 시스템 특성을 연구하였다. 특히 마이크로파 reflectometry를 플라즈마 연구 분야에 응용하기 시작한 것은 비교적 최근의 일로서 그 활용도가 점차 증가하고 있는데, 마이크로파 reflectometry로 비균질 매질을 조사하기 위해서는 대상에 따른 시스템의 하드웨어 구성이 최적화되어야 하며, 시스템에서의 신호 응답 특성이 이해되어야만 전체적인 시스템 해법을 제공하는 것이 된다. 마이크로파 reflectometry를 이용하여 진단하는 대상인 플라즈마의 특성에 따른 시스템의 구성을 설명하고, 파동수 및 밀도 섭동에 관한 시스템의 특성을 실험적으로 조사하기 위한 장치를 설명하였다. 마이크로파 reflectometry의 신호는 대부분의 전자기파 에너지가 반사되는 지역에서 기인하는 cutoff 신호와 교란 신호와의 상호 작용으로 발생하는 산란 신호로 구성된다. 이 논문에서는 마이크로파 reflectometry의 산란 신호 특성을 실험적 방법으로 조사한 결과를 제시하며, 1차원 파동방정식을 이용한 수치 해석적 결과와 비교 분석하였고, cutoff 신호 특성과도 비교하였다.

• Ocean Systems Engineering
• /
• 제13권2호
• /
• pp.123-146
• /
• 2023

In this paper, Moore-Gibson-Thompson theory of thermoelasticity is considered to investigate the fundamental solution and vibration of plane wave in an isotropic photothermoelastic solid. The governing equations are made dimensionless for further investigation. The dimensionless equations are expressed in terms of elementary functions by assuming time harmonic variation of the field variables (displacement, temperature distribution and carrier density distribution). Fundamental solutions are constructed for the system of equations for steady oscillation. Also some preliminary properties of the solution are explored. In the second part, the vibration of plane waves are examined by expressing the governing equation for two dimensional case. It is found that for the non-trivial solution of the equation yield that there exist three longitudinal waves which advance with the distinct speed, and one transverse wave which is free from thermal and carrier density response. The impact of various models (i)Moore-Gibson-Thomson thermoelastic (MGTE)(2019), (ii) Lord and Shulman's (LS)(1967) , (iii) Green and Naghdi type-II(GN-II)(1993) and (iv) Green and Naghdi type-III(GN-III)(1992) on the attributes of waves i.e., phase velocity, attenuation coefficient, specific loss and penetration depth are elaborated by plotting various figures of physical quantities. Various particular cases of interest are also deduced from the present investigations. The results obtained can be used to delineate various semiconductor elements during the coupled thermal, plasma and elastic wave and also find the application in the material and engineering sciences.

• Transactions on Electrical and Electronic Materials
• /
• 제14권6호
• /
• pp.304-307
• /
• 2013

Reverse engineering of semiconductor devices utilizes delayering processes, in order to identify how the interconnection lines are stacked over transistor gates. Cu metal has been used in recent fabrication technologies, and de-processes becomes more difficult with the shrinking device dimensions. In this article, reverse engineering technologies to reveal the Cu interconnection lines and Cu via-plugs embedded in dielectric layers are investigated. Stacked dielectric layers are removed by $CF_4$ plasma etching, then the exposed planar Cu metal lines and via-plugs are selectively delineated by wet chemical solution, instead of the commonly used plasma-based dry etch. As a result, we have been successful in extracting the layouts of multiple layers within a system IC, and this technique can be applicable to other logic IC, analog IC, and CMOS IC, etc.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.204-204
• /
• 1999

The plasma source ion implantation(PSII) technique which is a method using high negative voltage pulse in plasma system has the potential to change the surface properties of polymer. PSII technique increase the surface free energy by introducing polar functional groups on the surface so that it improves reactivity, hydrophilicity, adhension, biocompatability, etc. However, the mobility of polymer chains enables the modified surface layers to adapt their composition to interfacial force. This hydrophobic recovery interrupts the stability of modified surfaces to keep for the long time. In this study, poly(methyl methacrylate)(PMMA), poly(2-hydroxyethyl methacrylate)(PHEMA), and polu(2-hydroxypropyl methacylate)(PHPMA) for contact lens application, were modified to improve the wettability with PSII technique and were investigated the surface stabilities. Polymer film was prepared with solution casting(3 wt.% solution) and was annealed at 11$0^{\circ}C$ under vacuum oven to remove solvent completely and to eliminate physical ageing. The thickness of the film measured by scanning electron microscopy (SEM) and surface profilometer was about 10${\mu}{\textrm}{m}$. Polymers were treated with different kinds of gases, pulse frequency, pulse with, pulse voltage, and treatment time. Even though PMMA, PHEMA, and PHPMA have similar repeat unit structure, the optimal treatment conditions and the tendency to hydrophobic recovery were different. PHPMA, more hydrophilic polymer than PMMA and PHEMA showd better wettability and stability after mild treatment. Surface tensions were obtained by water and diiodomethane contact angle measurements to monitor the relation between hydrophobic recovery and polymer structure. Different ion species in plasma change the polar component and dispersion component of polymer surface. For better wettability surface, the increase of polar component was a dominant factor. We also characterized modified polymer surfaces using x-ray photoelectron spectroscopy(XPS), secondary ion mass spectrometry(SIMS), Fourier Transform infrared spectroscopy(FT-IR), and SEM.

• 분석과학
• /
• 제13권4호
• /
• pp.474-483
• /
• 2000

사용후핵연료에 함유되어 있는 핵분열생성물을 분석하기 위하여 여러 원소를 동시에 분석할 수 있고, 분석감도가 커서 시료의 방사능과 폐기물의 양을 감소시킬 수 있는 유도 결합 플라스마 원자방출분광기/차폐 시스템을 구성하였다. 방사성 물질이 직접 접촉되는 플라스마 들뜸원과 시료용액 도입부를 스테인리스 스틸 재질의 글로브박스 내부에 설치하였으며, 고주파 들뜸전원, 분광기, 검출기 그리고 전기, 전자 및 아르곤 가스 공급 제어장치는 외부에 설치하였다. 분석능과 방사선 안전의 관점에서 시스템의 특성을 검증하였으며, 사용후핵연료 용해용액과 원자력발전소의 일차냉각수를 대상으로 핵분열생성물과 방사성 부식생성물 분석에 대한 적용성을 평가한 결과 $0.01-0.1mgL^{-1}$ 농도범위에서 상대표준편차는 5% 이하였다.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.426-431
• /
• 2015

Microstructural examination of the Nb-Si-B alloys at Nb-rich compositions is performed. The Nb-rich corner of the Nb-Si-B system is favorable in that the constituent phases are Nb (ductile and tough phase with high melting temperature) and $T_2$ phase (very hard intermetallic compound with favorable oxidation resistance) which are good combination for high temperature structural materials. The samples containing compositions near Nb-rich corner of the Nb-Si-B ternary system are prepared by spark plasma sintering (SPS) process using $T_2$ and Nb powders. $T_2$ bulk phase is made in arc furnace by melting the Nb slug and the Si-B powder compact. The $T_2$ bulk phase was subsequently ball-milled to powders. SPS is performed at $1300^{\circ}C$ and $1400^{\circ}C$, depending on the composition, under 30 MPa for 600s, to produce disc-shaped specimen with 15 mm in diameter and 3 mm high. Hardness tests (Rockwell A-scale and micro Vickers) are carried out to estimate the mechanical property.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.582-582
• /
• 2013

Oxide TFT (thin film transistor) active channel layer에 대한 저온 열처리 공정은 투명하고 flexibility을 기반으로하는 display 산업과 AMOLED (active matrix organic light emitting diode) 분야 등 다양한 분야에서 필요로 하는 기술로서 많은 연구가 이루어지고 있다. 과거 active layer는 ALD (atomic layer deposition), CVD (chemical vapor deposition), pulse laser deposition, radio frequency-dc (RF-dc) magnetron sputtering 등과 같은 고가의 진공 장비를 이용하여 증착 되어져 왔으나 현재에는 진공 장비 없이 spin-coating 후 열처리 하는 저가의 공정이 주로 연구되어 지고 있다. Flexible 기판들은 일반적인 OTFT (oxide thin films Transistor)에 적용되는 열처리 온도로 공정 진행시 열에 의한 기판의 손상이 발생한다. Flexible substrate의 열에 의한 기판 손상을 막기 위해 저온 열처리 공정이 연구되고 있지만 기존 열처리와 비교하여 소자의 특성 저하가 동반 되었다. 본 연구에서는 Si 기판위에 SiO2 (100)를 절연층으로 증착하고 그 위에 IZO (indium zinc oxide) solution을 spin-coating 한뒤 $250^{\circ}C$ 이하의 온도에서 열처리하였다. 저온 공정으로 인하여 소자의 특성 저하가 동반 되었으므로 소자의 저하된 특성 복원하고자 post-treatment로 고가의 진공장비가 필요 없고 roll-to roll system 적용이 수월한 remote-type의 APP (atmospheric pressure plasma) 처리를 하였다. Post-treatment로 APP를 이용하여 $250^{\circ}C$ 이하에서 소자에 적용 가능한 on/off ratio를 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2007-2009
• /
• 1999

In this paper, discharge domain of wire-cylindrical plasma reactor was separated from a gas flow duct to avoid unstable discharge by aerosol particle deposited on discharge electrode and grounded electrode. The NOx, SOx removal was experimentally investigated by a reaction induced to ammonium nitrate, ammonium sulfate using a low price of aqueous NaOH solution and a small quantity of ammonia. Volume percentage of aqueous NaOH solution used was 20% and $N_2$ flow rate was 2.5[$\ell$/min] for bubbling aqueous NaOH solution. Ammonia gas(14.82%) balanced by argon was diluted by air and was introduced to a main simulated flue gas duct through $NH_3$ injection system which was in downstream of reactor. The $NH_3$ molecular ratio[MR] was determined based on $NH_3$ to [NO+$SO_2$]. MR is 1.5. The NOx removal rates increased in the order of DC, AC and pulse, but SOx removal rates was not significantly effected by source of electricity. The NOx removal rate slightly decreased with increasing initial concentration but SOx removal rate was not significantly effect by initial concentration, and NOx, SOx removal rates decreased with increasing gas flow rate.