• Journal of fish pathology
• /
• v.31 no.1
• /
• pp.23-34
• /
• 2018

The pharmacokinetic properties of cefadroxil (CDX) were studied after oral administration for 7 days to cultured olive flounders (average 660 g), Paralichthys olivaceus. For examination of pharmaco-kinetic profiles, CDX of 45 to 225 mg/kg body weight was administered at two different water temperatures, $13{\pm}3^{\circ}C$ or $22{\pm}3^{\circ}C$. CDX concentrations were determined in muscle, plasma, gastrointestinal tract, hematopoietic organs and liver by HPLC-MS/MS. Muscle samples were taken at 0.25, 0.5, 1, 3, 7, 14 and 28 days post dose, whereas plasma, gastrointestinal tract, hematopoietic organs and liver concentrations were measured at 1, 3, 7, 14 and 28 days post-dosing. The kinetic profiles of $C_{max}$, $T_{max}$, $T_{1/2}$ of CDX were analyzed by fitting to a non-compartmental model with PKSolver program. The following pharmacokinetic parameters were obtained with oral administration of 45 and 225 mg/kg at 13 and $22^{\circ}C$ in muscle, plasma, gastrointestinal tract, hematopoietic organs and liver, respectively: $C_{max}$ (maximum tissue concentration)=$985.98-5,032.86{\mu}g/kg$, $5,670.99-38,922.23{\mu}g/l$, $2,457.27-10,192.78{\mu}g/kg$, $886.04-3,070.87{\mu}g/kg$ and $1,188.15-3,814.33{\mu}g/kg$; $T_{max}$ (time for maximum concentration)= every 1 day; $MRT_{0-{\infty}}$ (mean residence time)= 1.51-4.74, 2.12-3.06, 4.25-13.18, 1.37-18.66 and 1.78-29.76 days; $T_{1/2}$ (half-life)= 1.08-3.47, 1.14-5.42, 3.56-10.99, 1.17-14.93 and 1.25-28.55 days.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.85-103
• /
• 2023

The in-situ remediation of a solidified stratum containing a large amount of fine-texture material like clay or organic matter in contaminated soil faces limitations such as increased remediation cost resulting from decreased purification efficiency. Even if the soil conditions are good, remediation generally requires a long time to complete because of non-uniform soil properties and low permeability. This study assessed the remediation effect and evaluated the field applicability of a methodology that combines pneumatic fracturing, vacuum extraction, and plasma blasting (the PPV method) to improve the limitations facing existing underground remediation methods. For comparison, underground remediation was performed over 80 days using the experimental PPV method and chemical oxidation (the control method). The control group showed no decrease in the degree of contamination due to the poor delivery of the soil remediation agent, whereas the PPV method clearly reduced the degree of contamination during the remediation period. Remediation effect, as assessed by the reduction of the highest TPH (Total Petroleum Hydrocarbons) concentration by distance from the injection well, was uncleared in the control group, whereas the PPV method showed a remediation effect of 62.6% within a 1 m radius of the injection well radius, 90.1% within 1.1~2.0 m, and 92.1% within 2.1~3.0 m. When evaluating the remediation efficiency by considering the average rate of TPH concentration reduction by distance from the injection well, the control group was not clear; in contrast, the PPV method showed 53.6% remediation effect within 1 m of the injection well, 82.4% within 1.1~2.0 m, and 68.7% within 2.1~3.0 m. Both ways of considering purification efficiency (based on changes in TPH maximum and average contamination concentration) found the PPV method to increase the remediation effect by 149.0~184.8% compared with the control group; its average increase in remediation effect was ~167%. The time taken to reduce contamination by 80% of the initial concentration was evaluated by deriving a correlation equation through analysis of the TPH concentration: the PPV method could reduce the purification time by 184.4% compared with chemical oxidation. However, the present evaluation of a single site cannot be equally applied to all strata, so additional research is necessary to explore more clearly the proposed method's effect.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.5
• /
• pp.340-346
• /
• 1996

In order to find out if staphylococci occur in significant numbers in Korean fermented fish products, a total of 40 different fermented fish products were collected from different markets in Korea and analyzed for their physico-chemical and microbiological states. The pH, salt concentration and water activity of the products were measured and the total viable cell count and the number of Staphylococcus grown on mannitol salt agar were determined. The identification of the strains of Staphylococcus were made by API Staph Strip and MIS identification kits, and the physiological properties of the identified strains were further characterized by different conventional methods. The pH, salt content and water activity of fermented fish samples varied widely from 4.8 to 7.1, 7.4-28.7$%$ and 0.77-0.84, repectively, depending on the type of product. The total viable cell count varied from $10^4-10^9$ cfu/ml, and most of the samples had $10^5-10^6$ cfu/ml No correlation was found between the viable cell count and the pH, NaCl concentration and water activity of the samples. Among the 35 colonies identified as Staphylococcus strains by the identification kits, S. xylosus was the most frequently occurring strain marking 17, and S. warneri was 8, S. epidermidis 4 and S. cohnii 2. S. hominis, S. saprophyticus, S. haemolyticus and S. aureus were also identified once each. In some samples (K-3, P-6, K-8, G-5 and G-10), 2-3 different species of Staphylococcus were found. Considering the region of sampling, among the 10 samples from Kunsan 5 were identified as S. warneri, while in the other regions S. xylosus was predominant. Although the physiological characteristics of the identified strains were generally consistent with those in Bergey's Manual, some discrepances were also observed. All the strains were highly salt tolerant, growing in the media containing over 18$%$ NaCl. All the strains except S. aureus (G-11) showed negative in hemolysis activity, plasma coagulation and DNase tests. All the strains including S. aureus (G-11) showed negative in enterotoxin test.

• Korean Journal of Materials Research
• /
• v.22 no.4
• /
• pp.190-194
• /
• 2012

The formation of high-quality polycrystalline silicon (poly-Si) on relatively low cost substrate has been an important issue in the development of thin film solar cells. Poly-Si seed layers were fabricated by an inverse aluminum-induced crystallization (I-AIC) process and the properties of the resulting layer were characterized. The I-AIC process has an advantage of being able to continue the epitaxial growth without an Al layer removing process. An amorphous Si precursor layer was deposited on Corning glass substrates by RF magnetron sputtering system with Ar plasma. Then, Al thin film was deposited by thermal evaporation. An $SiO_2$ diffusion barrier layer was formed between Si and Al layers to control the surface orientation of seed layer. The crystallinity of the poly-Si seed layer was analyzed by Raman spectroscopy and x-ray diffraction (XRD). The grain size and orientation of the poly-Si seed layer were determined by electron back scattering diffraction (EBSD) method. The prepared poly-Si seed layer showed high volume fraction of crystalline Si and <100> orientation. The diffusion barrier layer and processing temperature significantly affected the grain size and orientation of the poly Si seed layer. The shorter oxidation time and lower processing temperature led to a better orientation of the poly-Si seed layer. This study presents the formation mechanism of a poly seed layer by inverse aluminum-induced crystallization.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.136.1-136.1
• /
• 2010

고체산화물 연료전지(SOFC)에서 사용되는 연결재의 주 기능은 각 단위 셀의 연료극과 다음 셀의 공기극을 전기적으로 연결하여, 공기와 사용연료의 분리역할을 하기위해 사용된다. SOFC용 연결재는 다른 구성요소 소재보다 높은 전기전도성, 낮은 이온전도성이 요구되며 SOFC는 고온에서 작동되기 때문에 다른 구성 소재들과 유사한 열팽창계수와 물리, 화학적인 안정성이 요구된다. 현재 연결재 제조기술은 plasma coating, sputtering, screen printing, 전사법등 다양한 연구가 진행되고 있다. 본 연구에서는 저렴한 비용으로 대량생산이 용이한 고상반응법을 적용하여 세라믹연결재를 제조하고, 그 특성을 연구하였다. 세라믹 연결재로서 선정한 합성조성은 $(La_{0.7}Ca_{0.3})(Cr_{0.9}Co_{0.1})O_3$로 SOFC 작동온도에서 높은 전기전도도를 나타낸다. LCCO 연결재를 1300, 1400 및 $1500^{\circ}C$에서 합성을 진행하였을 때 출발원료로 $CaCO_3$를 $CaF_2$로 대체하였을 때의 소결특성을 평가하였고, SEM과 XRD분석을 통하여 균질하고 결정성이 우수한 분말이 합성된 것을 확인하였고 DC impedance analyzer를 사용하여 전기전도도를 측정하였다. TMA를 사용하여 열팽창계수를 측정한 결과 YSZ(${\sim}10.8{\times}10^{-6}/^{\circ}C$)와 동일한 값을 나타내었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.20-25
• /
• 2007

In this paper, It was reported the dielectric constant in organic inorganic hybrid silica material such as SiOC film modeling of bond structure by annealing in organic properties. The organic inorganic hybrid silica material were deposited using bis-trimethylsilymethane (BTMSM, [(CH3)3Si]2CH2) and oxygen gas precursor by a plasma chemical vapor deposition (CVD). The organic inorganic hybrid silica material have three types according to the deposition condition. The dielectric constant of the films were performed MIS(Al/Si-O-C film/p-Si) structure. The C 1s spectra in organin inorganic silica materials with the flow rate ratio of O2/BTMSM=1.5 was organometallic carbon with the peak 282.9 eV by XPS. It means that organometallic carbon component is the cross-link bonding structure with good stability. The dielectric constant was the lowest at annealed films with cross-link bonding structure.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.3
• /
• pp.404-414
• /
• 2015

Taurine is one of the most abundant free ${\beta}$-amino acids in the human body that accounts for 0.1% of the human body weight. It has a sulfonic acid group in place of the more common carboxylic acid group. Mollusks and meat are the major dietary source of taurine, and mother's milks also include high levels of this amino acid. The leukocytes, heart, muscle, retina, kidney, bone, and brain contain more taurine than other organs. Furthermore, taurine can be synthesized in the brain and liver from cysteine. There are no side effects of excessive taurine intake in humans; however, in case of taurine deficiency, retinal abnormalities, reduced plasma taurine concentration, and other abnormalities may occur. Taurine enters the cell via a cell membrane receptor. It is excreted in the urine (approximately 95%) and feces (approximately 5%). Taurine has a number of features and functions, including conjugation with bile acid, reduction of blood cholesterol and triglyceride levels, promotion of neuron cell differentiation and growth, antioxidant effects, maintenance of cell membrane stability, retinal development, energy generation, depressant effects, regulation of calcium level, muscle contraction and relaxation, bone formation, anti-inflammatory effects, anti-cancer and anti-atherogenic effects, and osmotic pressure control. However, the properties, functions, and effects of taurine require further studies in future.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.613-618
• /
• 2009

We designed new compositions for lead free and low temperature sealing glass frit of $ZnO-V_2O_5-P_2O_5$ system, which can be used for PDP (Plasma Display Panel) or other electronic devices. The $ZnO-V_2O_5-P_2O_5$ system can be used as a sealing material at temperatures even lower than 430$^{\circ}C$. This system, however, showed lower bonding strength with glass substrate compared to commercialized Pb based sealing materials. So, we added $TiO_2$ as a promoter for bonding strength. We examined the effect of $TiO_2$ addition on sealing behaviors of $ZnO-V_2O_5-P_2O_5$ glasses with the data for flow button, wetting angle, temporary & permanent residual stress of glass substrate, EPMA analysis of interface between sealing materials and glass substrate, and bonding strength. As a result, sealing characteristics of $ZnO-V_2O_5-P_2O_5$ system glasses were improved with $TiO_2$ addition, but showed a maximum value at 5 mol% $TiO_2$ addition. The reason for improved bonding characteristics was considered to be the chemical interaction between glass substrate and sealing glass, and structural densification of sealing glass itself.

• Journal of the Korean Ceramic Society
• /
• v.45 no.9
• /
• pp.549-555
• /
• 2008

The thermal barrier coating must withstand erosion when subjected to flowing gas and should also maintain good stability and mechanical properties while it must also protect the turbine component from high temperature, hot corrosion, creep, and oxidation during operation. In this study we investigated the influence of subsurface layer, $Al_2O_3$ or NiCrCoAIY bond coat layer, on the indentation damage behavior of YSZ thermal barrier coating layers deposited by electron beam physical vapor deposition (EB-PVD). The bond coat is deposited using different process such as air plasma spray (APS) or spray of high velocity oxygen fuel (HVOF) and the thickness is varied. Hertzian indentation technique is used to induce micro damages on the coated layer. The stress-strain behaviors are characterized by results of the indentation tests.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.138-139
• /
• 2009

폴리머 기판위에서 ICP-RIE 방법을 이용하여 $O_2$ 플라즈마 전처리효과에 따른 GZO박막의 전기적, 광학적인 특성을 고찰 하였다. ICP-RIE 방법을 이용하여 폴리머 기판 위에 $O_2$ 플라즈마 전처리의 공정 값은 공정압력은 20 mTorr, 파워는 100 W로 하고 변수로는 시간을 60초 ~ 600초로 하였다. $O_2$ 플라즈마 전처리한 기판위에 RF Sputtering 방법을 이용하여 4인치의 GZO(ZnO: 95 wt%, $Ga_2O_3$: 5 wt%) 타겟을 사용하여 공정압력은 5 mTorr, 파워는 150 W, 박막의 두께는 500 nm의 조건으로 박막을 증착하였다. PET 기판의 600초의 $O_2$ 플라즈마 처리 후 증착한 GZO 박막의 비저항이 $6.2\times10^{-3}\;{\Omega}$-cm이었고, PEN 기판의 120초의 $O_2$ 플라즈마 처리 후 증착한 GZO 박막의 비저항이 $1.1\;{\times}\;10^{-3}\;{\Omega}$-cm이었다. 또한 300 nm 이하의 자외선 영역에서는 뛰어난 광 차단 효과를 가지고 있었으며, 가시광선 영역 (400 nm ~ 700 nm)에서 증착 된 시편들이 80 % 광 투과율을 나타내었다.