• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.705-710
• /
• 2015

The fabrication process of thin boron-doped nanocrystalline diamond (B-NCD) microelectrodes on fused silica single mode optical fiber cladding has been investigated. The B-NCD films were deposited on the fibers using Microwave Plasma Assisted Chemical Vapor Deposition (MW PA CVD) at glass substrate temperature of 475 ℃. We have obtained homogenous, continuous and polycrystalline surface morphology with high sp³ content in B-NCD films and mean grain size in the range of 100-250 nm. The films deposited on the glass reference samples exhibit high refractive index (n=2.05 at λ=550 nm) and low extinction coefficient. Furthermore, cyclic voltammograms (CV) were recorded to determine the electrochemical window and reaction reversibility at the B-NCD fiber-based electrode. CV measurements in aqueous media consisting of 5 mM K₃[Fe(CN)₆] in 0.5 M Na₂SO₄ demonstrated a width of the electrochemical window up to 1.03 V and relatively fast kinetics expressed by a redox peak splitting below 500 mV. Moreover, thanks to high-n B-NCD overlay, the coated fibers can be also used for enhancing the sensitivity of long-period gratings (LPGs) induced in the fiber. The LPG is capable of measuring variations in refractive index of the surrounding liquid by tracing the shift in resonance appearing in the transmitted spectrum. Possible combined CV and LPG-based measurements are discussed in this work.

• The Korean Journal of Physiology
• /
• 제30권2호
• /
• pp.279-288
• /
• 1996

Chronic exposure to cadmium impairs various renal tubular functions, including organic acid (anion) secretion. To investigate the mechanism of cadmium-induced alterations in the organic anion transport system, kinetics of p-aminohippurate (PAH) uptake was studied in renal cortical basolateral membrane vesicles (BLMV) isolated from cadmium-intoxicated rats (adult male Sprague-Dawley). Cadmium intoxication was induced by subcutaneous injections of $CdCl_{2}$ (2 mg Cd/kg per day) for 3 weeks. The renal plasma membrane vesicles were prepared by Percoll gradient centrifugation. The vesicular uptake of $^{14}C$-PAH was determined by rapid filtration technique using Millipore filter. Cadmium intoxication resulted in a marked attenuation of $Na^{+}$-dependent, ${\alpha}$-ketoglutarate (${\alpha}$KG)-driven PAH uptake with no changes in $Na^{+}$ and ${\alpha}$KG-independent transport component. Kinetic analysis indicated that Vmax, but not Km, of the $Na^{+}$-dependent, ${\alpha}$KG-driven component was reduced. A similar reduction of $Na^{+}$-dependent, ${\alpha}$KG-driven PAH uptake was observed in normal membrane vesicles directly exposed to inorganic cadmium in vitro, and this was accompanied by an inhibition of both $Na^{+}$-dependent ${\alpha}$KG uptake and ${\alpha}$KG-PAH exchange activity. These results indicate that during chronic exposure to cadmium, free cadmium ions liberated in the proximal tubular cytoplasm directly interact with the basolateral membrane and impair the active transport capacity for organic anions, most likely due to an inhibition of both $Na^{+}$-dicarboxylate cotransporter and dicarboxylate-organic anion antiporter activities.

• 공업화학
• /
• 제26권3호
• /
• pp.372-376
• /
• 2015

6M HCl 용매 하에서 6-메틸퀴놀린과 chromium(VI) trioxide의 반응을 통하여 6-MQCC(크롬(VI)-6-메틸퀴놀린) 착물을 합성하였다. 적외선분광광도법(IR), 유도결합 플라즈마(ICP) 등으로 구조를 확인하였다. 여러 가지 용매 하에서 6-MQCC을 이용하여 벤질 알코올의 산화반응을 측정한 결과, 용매의 유전상수 값이 증가함에 따라 반응수율이 증가했다. 그 순서는 DMF > 아세톤 > 클로로포름 > 시클로헥센이었다. 산($H_2SO_4$) 촉매를 이용한 DMF 용매 하에서, 6-MQCC은 벤질 알코올(H)과 그의 유도체들($p-OCH_3$, $m-CH_3$, $m-OCH_3$, m-Cl, $m-NO_2$)을 효과적으로 산화시켰다. 전자받개 그룹들은 반응속도가 감소한 반면에 전자주개 치환체들은 반응속도를 증가시켰고, Hammett 반응상수(${\rho}$) 값은 -0.69 (308 K)이었다. 본 실험에서 알코올의 산화반응 과정은 속도결정단계에서 수소화 전이가 일어났다.

• Journal of Pharmaceutical Investigation
• /
• 제33권3호
• /
• pp.201-208
• /
• 2003

Pharmacokinetics and oral bioavailability of levosulpiride was determined in Korean healthy male volunteers. Thirty subjects received a single oral dose (25 mg) of a tablet in a randomized $2{\times}2$ cross-over design. The plasma concentrations of levosulpiride were measured by HPLC and compared with those reported in the literature. Pharmacokinetic parameters for $Isomeric^{\circledR}$ tablet (levosulpiride 25 mg) were revealed as follows: $AUC_{inf}\;737.1{\pm}176.9\;ng{\cdot}hr/ml,\;C_{max}\;56.4{\pm}20.1\;ng/ml,\;T_{max}\;4.2{\pm}1.6\;hr,\;K_a\;1.00{\pm}1.09\;hr^{-1},\;K_{el}\;0.08{\pm}0.02\;hr^{-1},\;and\;t_{1/2}\;8.8{\pm}1.9\;hr$. The rate constant of the absorption phase was obtained based on the first-order kinetics. In the aspect of bioavailability, $Isomeric^{\circledR}$ tablet was bioequivalent to the other product $(Levopride^{\circledR}\;tablet)$ available in the Korea market. Intersubject variations and race differences were show in comparison with the published data in the literature, even though there was a linear relationship between dose ad extent of bioavailability.

• 한국미생물·생명공학회지
• /
• 제14권6호
• /
• pp.455-460
• /
• 1986

간염 보균자의 혈액으로부터 Dane 입자를 분리하였다. Dane 입자의 핵으로부터 분리해낸 DNA는 $\alpha$-($^{32}$P) dNTP 존재하의 DNA 폴리머레이즈 반응 후 액체 씬틸레이션 카운터와 한천 전기영동 및 가이거 뮐러 카운터에 의하여 간염의 DNA임이 확인되었다. 간염 바이러스에 의한 감염을 막기 위한 백신으로서의 B형 간염 바이러스 표면항원을 생산하기 위하여 산성포스파테이즈 프로모터를 갖는 재조합 프라스미드를 함유하는 효모균주를 사용하였다. 재조합 프라스미드는 pHBV 130 및 pAM 82로부터 제작되었으며 대장균에 변환되어진 후 효모균주에 전달되었다. 간염 표면항원은 조절된 무기 인산 농도하에서 버크홀더 최소배지에서의 저해 해제로 생산되었다. 간염 표면항원의 생산 속도도 조사하였다. 전체 간염 표면항원 활성은 인산이 없는 배지에 옮겨진 뒤 3시간 내지 6시간에서 급격히 증가하였으며 9시간째에 최대에 도달하였다. 인산이 없는 배지에 옮기는 것은 고농도 인산 배지에서의 세포 배양을 6시간동안 수행한 뒤에 하는 것이 최적의 결과를 나타내었다.

• Corrosion Science and Technology
• /
• 제3권3호
• /
• pp.112-117
• /
• 2004

This work investigated the material properties of Ni-P-B alloy electrodeposits obtained from a Ni sulfamate bath as a function of the contents of the P and B sources($H_3PO_3$ and dimethyl amine borane complex(DMAB), respectively) with/without additives. Chemical composition, residual stress, microstructure and micro hardness were investigated using ICP(inductively coupled plasma) mass spectrometer, flexible strip, XRD, TEM and micro Vickers hardness tester, respectively. From the results of the compositional analysis, it was observed that P and B are incorporated competitively during the electrodeposition and the sulfur from the additive is codeposited into the electrodeposit. The measured residual stress value increased in the order of Ni, Ni-P, Ni-B and Ni-P-B electrodeposits indicating that boron affects the residual tensile stress greater than phosphorus. As the contents of the alloying element sources of P and B increased, crystallinity and the grain size of the electrodeposit decreased. The effect of boron on crystallinity and grain size was also relatively larger than the phosphorus. It can be explained that the boron with a smaller atomic radius contributes to the increase of residual stress in the tensile direction and the larger restraining force against the grain growth more significantly than the phosphorus with a larger atomic radius. Introduction of an additive into the bath retarded crystallization and grain growth, which may be attributed to the change of the grain growth kinetics induced by the additive adsorbed on the substrate and electrodeposit surfaces during electrodeposition.

• Archives of Pharmacal Research
• /
• 제13권2호
• /
• pp.151-160
• /
• 1990

In order to develop a controlled-release oral drug delivery system (DDS) which sustains the plasma acetaminophen (AAP) concentration for a certain period of time, microporous membrane-coated tablets were prepared and evaluated in vitro. Firstly, highly water-soluble core tablet of AAP were prepared with various formulations by wet granulation and compression technique. Then the core tablets were coated with polyvinychloride (PVC) in which micronized sucrose particles were dispersed. Effect of formula compositions of core tablets and coating suspensions on the pharmaceutical characteristics such as drug release kinetics and membrane stability of the coated tablets was investigated in vitro. AAP was released from the coated tablets as a zero-order rate in a pH-independent manner. This independency of AAP release to pH change from 1.2 to 7.2 is favorable for the controlled oral drug delivery, since it will produce a constant drug release in the stomach and intestine regardless of the pH change in the GI tract. Drug release could be extended upto 10 h according to the coating condition. The release rate could be controlled by changing the formula compositions of the core tablets and coating suspensions, coat weight per each tablet, and especially PVC/sucrose ratio and particle size of the sucrose in the coating suspension. The coated tablets prepared in this study had a fairly good pharmaceutical characteristics in vitro, however, overall evaluation of the coated tablet should await in vivo absorption study in man.

• 약학회지
• /
• 제40권3호
• /
• pp.279-292
• /
• 1996

To assess their stability as a prodrug of 5-fluorouracil (5-FU), four N-acyloxycarbonyl derivatives (1-(N-tert-butyloxycarbonyl)glycyloxymethyl-5-FU :BGFU, 1-(N-tert-butyloxycar bonyl)-leucyloxymethyl-5-FU:BLFU, 1-(N-tert-carbobenzyloxymethyl) glycyloxymethyl-5-FU:CGFU and 1-(N-tert-carbobenzlyoxymethyl)leucyloxymethyl-5-FU:CLFU) possessing differently protected amino acids, and two acetic acid derivatives (5FU-1-acetylpentane:FUAP and 5-FU-1-acetylhexane:FUAH) were synthesized and their physicochemical properties, hydrolysis kinetics, acute toxicity and antitumor activity were evaluated. The lipid-water partition coefficients of six 5-FU prodrugs were higher than that of 5-FU and their aqueous solubilities were in the following rank order; BGFU>FUAP>CGFU>BLFU>CLFU${\simeq}$FUAH. The hydrolysis of N-acyloxycarboyl derivatives, greater at higher pH, was enhanced in presence of liver homogenate or human plasma. Meanwhile, acetic acid ester derivatives, very stable, were hydrolyzed by liver homogenate. Absorption rate constants were 0.181, 0.121, 0.111, 0.168, 0.168, 0.116 and 0.125 $hr^{-1}$ for 5-FU, BGFU, BLFU, CGFU, CLFU, FUAP and FUAH, respectively. The cytotoxicity of N-acyloxycarbonyl derivatives was 4 to 5 times lower than that of 5-FU, but that of acetic acid ester derivatives was negligeble. The $LD_{50}$ values were 204, 325.97 (133.59, amount as 5-FU), 708.16 (262.13), 663.50 (211.77), 382.33 (192.54) and 272.33 (130.09) mg/kg for 5-FU, BGFU, CGFU, CLFU, FUAP and FUAH, respectively. While N-acyloxycarbonyl derivatives showed enhanced antitumor activity and therapeutic ratio (3.30, 3.06, 4.19, 3.11 and 1.81 for BGFU, BLFU, CGFU, CLFU and 5-FU, respectively), FUAH and FUAP showed a smaller therapeutic ratio (0.79 and 0.83).

• Carbon letters
• /
• 제18권
• /
• pp.49-55
• /
• 2016

Refuse-derived fuel (RDF) produced using municipal solid waste was pyrolyzed to produce RDF char. For the first time, the RDF char was used to remove aqueous copper, a representative heavy metal water pollutant. Activation of the RDF char using steam and KOH treatments was performed to change the specific surface area, pore volume, and the metal cation quantity of the char. N₂ sorption, Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES), and Fourier transform infrared spectroscopy were used to characterize the char. The optimum pH for copper removal was shown to be 5.5, and the steam-treated char displayed the best copper removal capability. Ion exchange between copper ions and alkali/alkaline metal cations was the most important mechanism of copper removal by RDF char, followed by adsorption on functional groups existing on the char surface. The copper adsorption behavior was represented well by a pseudo-second-order kinetics model and the Langmuir isotherm. The maximum copper removal capacity was determined to be 38.17 mg/g, which is larger than those of other low-cost char adsorbents reported previously.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.95-95
• /
• 2009

Zinc coatings provide the most effective and economical way of protecting steel against corrosion. There are three types of galvanizing lines typically used in production line in galvanizing industries,Galvanize (GI) coating (Zn-0.1-0.3%Al), Galfan coating (Zn-5%Al), Galvalume(GL) coating (45%Zn-Al). In continuous Galvanizing lines, the immersed bath hardware (e.g. bearings, sink, stabilizer, and corrector rolls, and also support roll arms and snout tip) are subjected to corrosion and wear failure. Understanding the reaction of these materials with the molten Zn alloy is becomes scientific and commercial interest. To investigate the reaction with molten Zn alloys, static immersion test performed for 4, 8, 16, and 24 Hr. Two different baths used for the static immersion, which are molten Zn and molten Zn-55%Al. Microstructures characterization of each of the materials and intermetallic layer formed in the reaction zone was performed using optical microscope, SEM and EDS. The thickness of the reaction layer is examined using image analysis to determine the kinetics of the reaction. The phase dominated by two distinct phase which are eutectic carbide and matrix. The morphology of the intermetallic phase formed by molten Zn is discrete phase showing high dissolution of the material, and the intermetallic phase formed by Zn-55wt%Al is continuous. Aluminum reacts readily with the materials compare to Zinc, forming iron aluminide intermetallic layer ($Fe_2Al_5$) at the interface and leaving zinc behind.