• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.181-188
• /
• 2006

In this study, we analyzed the effects of several process variables on the removal efficiencies of NO and $SO_2$ by the dielectric barrier discharge process combined with photocatalysts. The $TiO_2$ photocatalysts were coated onto the spherical-shaped glass beads as dielectric materials by the dip-coating method to analyze the effects of photodegradation reaction on the NO and $SO_2$ removal. As the voltage applied to the plasma reactor increases, or as the pulse frequency of applied voltage increases, the NO and $SO_2$ removal efficiencies increase. Also as the residence time increases, or as the initial concentration of NO decreases, the NO and $SO_2$ removal efficiencies increase. The higher the amount of $TiO_2$ particles coated onto the glass bead is, the larger the surface area of $TiO_2$ particles for the photodegradation reaction is and the NO and $SO_2$ are removed more quickly by the faster photodegradation reactions.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1576-1578
• /
• 1996

MgO protection layer in ac PDP prevents the dielectric layer from sputtering of ion in discharge plasma in addition to the contribution to the memory function and also have the additional important roll in lowering the firing Voltage due to a large secondary electron emission yield(${\gamma}$). The methode of Sputtering are easy to apply on mass production and to enlarge the size of the panel and are known to have the superior Adhesion and Uniformity of thin film. MgO protection layer of $1000{\AA}$ on dielectric layer by Reactive R.F magnetron sputtering is formed. Discharge characteristics have done with the formation of protection layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.464-464
• /
• 2012

본 연구에서는 DBD (Dielectric Barrier Discharge)방식을 통해 발생된 대기압 plasma를 이용한 Photoresist (PR) Ashing에 관한 연구를 하였다. 사용된 DBD 반응기는 기존의 blank planar plate 형태의 Power가 인가되는 anode 부분과 Dielectric Barrier 사이 공간을 액상의 도전체로 채워 넣은 형태의 전극이 사용 하였으며, 인가 Power는 40 kHz AC 최대 인가 전압 15 kV를 사용 하였고(본 연구에서 인가 power는 30 KHz,전압 14 KV를 고정시킴) 플라즈마를 발생시 라디칼의 활성화를 유지하기 위해 전극 온도가 $180^{\circ}C$ 정하였다. Feeding 가스는 N2, 반응가스로는 CDA(Clean Dry Air), SF6와 CF4가스를 사용 하였으며 모든 공정은 In-line type으로 시편을 처리 하였다. CDA ratio의 경우에 질소대비 0.2%때 이송속도 30 mm/sec 1회 처리 기존 PR ashing은 최대 $320{\AA}$의 ashing 두께를 얻을 수 있었다. SF6와 CDA가스를 같이 반응하는 경우 ratio는 CDA : SF6 = 0.6% : 0.6%에서 PR ashing rate이 $841{\AA}/pass$의 값을 얻을 수 있었고, CDA가스만 첨가하는 경우보다 약2.6배 증가함을 관찰할 수 있었다. CF4 가스를 사용하는 경우 ratio는 CDA : CF4 = 0.2% : 0.2%에서 PR ashing rate이 $687{\AA}/pass$의 값을 얻을 수 있으며 CDA가스만 첨가하는 경우보다 약 2.1배 증가함을 관찰할 수 있었다. 그리고 PR ashing rate가 가스첨가종류와 비율에 따라서 변화함을 관찰하였고 최적조건을 찾기 위해 연구를 진행하였다. 추후 PR ashing rate가 향상을 하기 위해 가스혼합비율 및 stage 온도등 조건을 조절하여 공정최적조건을 얻기 위해 연구를 진행하였다.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2182-2185
• /
• 1999

In this experimental study we propose the double dielectric barrier discharge(DDBD) reactor to produce as high an electric field as possible. DDBD reactor is designed to remove $NO_x$ at atmospheric pressures from the moving pollution source such as diesel automobile DDBD reactor consisted of two cylinder glass tubes arranged so that the gas flow was directed between the two tubes. Inside of the inner tube was filled with small metal beads and outside of the inner tube was wounded with stainless wire to form the electrode. The outer tube was surrounded by an aluminum foil In this reactor there are three electrodes, i.e. metal bead(C), helical wire(I) and aluminum foil(0). By using DDBD reactor we will report some interesting results of treatment of the gas which is the dilute mixtures of NO in N2. And then we compared thee results with the results of cylinder-wire(CW) which is one of popularly used reactor in non-thermal plasma applications.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1761-1763
• /
• 1998

ITO(Iridium-Tin Oxide) thin film, as discharge electrodes in AC PDP, should have low resistivity and high transparency. Regarded as a high deposition rate method, the ITO thin film fabricated by the facing target sputtering system has been studied in this paper. The electrical property of the ITO film deposited below $150^{\circ}C$ is not satisfied. The SEM pictures show that the ITO films deposited below $150^{\circ}C$ are amorphous. After being annealed the amorphous ITO films become crystalline, and for this reason, the electrical property of amorphous ITO films can be effectively improved by annealing process. An ITO film with the resistivity as low as $1.99{\times}10^{-4}$ and transparency above 85% has be gotten after vacuum annealing at $300^{\circ}C$ for 2 hours while deposited at $75^{\circ}C$. The corresponding deposition rate is $220{\AA}/min$.

• Journal of the Korea Safety Management & Science
• /
• v.1 no.1
• /
• pp.241-258
• /
• 1999

For hazardous air pollutants(HAP) such as NO and $NO_{2}$ decomposition efficiency, power consumption, and applied voltage were investigated by SPCP(surface induced discharge plasma chemical processing) reactor to obtain optimum process variables and maximum decomposition efficiencies. Decomposition efficiency of HAP with various electric frequencies(5~50 kHz), flow rates(100~1,000 mL/min), initial concentrations(100~1,000 ppm), electrode materials(W, Cu, Al), electrode thickness(1, 2, 3 mm) and number of electrode windings(7, 9, 11) were measured. Experimental results showed that for the frequency of 10 kHz, the highest decomposition efficiency of 94.3 % for NO and 84.7 % for $NO_{2}$ were observed at the power consumptions of 19.8 and 20W respectively and that decomposition efficiency decreased with increasing frequency above 20 kHz. Decomposition efficiency was increased with increasing residence times and with decreasing initial concentration of pollutants. Decomposition efficiency was increased with increasing thickness of discharge electrode and the highest decomposition efficiency was obtained for the electrode diameter of 3 mm in this experiment. As the electrode material, decomposition efficiency was in order : tungsten(W), copper(Cu), aluminum(Al).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.119-126
• /
• 2014

Micro-holes of conductive ceramic are required in micro structures. Micro-electrical discharge machining (Micro-EDM) is an effective machining method since EDM is as process for shaping hard metals and complex-shaped holes by spark erosion in all kinds of electro-conductive materials. However, as the depth of micro hole increases, the machining condition becomes more unstable due to inefficient removal of debris between the electrode and the workpiece. In this paper, micro-EDM was performed to evaluate machining characteristic such as electrode wear, machining time, taper angle, radial clearance with varying voltage and ultrasonic vibration on 10 vol.% Carbon-nanotube reinforced conductive $Al_2O_3$ composite fabricated by spark plasma sintering in previous research.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.1
• /
• pp.7-12
• /
• 2014

In this study, we investigate the effects of corona-discharge pre-treatment on the properties of carbon nanotubes (CNTs) which are used as flexible transparent electrodes. The CNTs are deposited on PET (polyethylene terephthalate) substrates using a spray coating method. Prior to the deposition of CNTs, the PET substrates are corona-treated by varying the feeding directions of the PET substrate and the numbers of treatments. The variations in the surface morphologies and roughnesses of the PET substrates due to corona-treatment are characterized via atomic force microscopy (AFM). Dynamic contact angles (DCAs) of the corona-treated PET substrates are measured and analyzed as functions of the treatment conditions. Also, the sheet resistances and visible-range transmittances of the CNTs deposited on PET substrates are measured before and after bending test. The experimental results obtained in this study provide strong evidences that the adhesive forces between CNTs and PET substrates can be substantially enhanced by corona-discharge pretreatment.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.3
• /
• pp.29-33
• /
• 2002

A procedure was developed for preparing bulk carbon nitride crystals from a polymeric $\alpha$ -C$_3$N$\_$4.2/ at high pressure and temperature in the presence of seeds of crystalline carbon nitride films prepared by a high voltage discharge plasma combined with pulsed laser ablation of graphite target. The samples were evaluated by x-ray photoelectron spectroscopy (XPS), infrared (IR) spectroscopy, Auger electron spectroscopy (AES), secondary-ion mass spectrometry (SIMS), scanning electron microscopy (SEM) and x-ray diffraction (XRD). Notably, XPS studies of the film composition before and after thermobaric treatments demonstrate that the nitrogen composition in $\alpha$ -C$_3$N$\_$4.2/ material initially containing more than 58% nitrogen decreases during the annealing process and reaches a common, stable composition of ~45%. The thermobaric experiments were performed at 10-77 kbar and 350-1200 $\^{C}$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.185-185
• /
• 2000

플라즈마 연구 및 응용에서 플라즈마를 구성하는 이온에 대한 정보를 얻는 것은 중요하다. 특히 플라즈마 진단, 박막 증착, 플라즈마 코팅, 플라즈마 이온주입 등과 같은 플라즈마 프로세싱에서 이온들의 종류 구성비율 및 분포는 매우 중요하다. 질량분석기는 대개 큰 규모로 복잡하고 값비싼 경향이 있다. 플라즈마 교란을 최소화하면서 충분한 질량분해능을 갖고 국소적으로 이온들을 분석할 수 있는 간단하고 작은 규모의 값싼 질량분석기가 필요하다. 본 연구에서는 플라즈마 내에 존재하는 이온을 분석하기 위하여 간단하고 작은 규모의 값싼 프라즈마 이온 질량분석기를 설계, 제작하였다. 이온 질량분석기는 ion extraction part, double focusing sector magnet, ion collector로 구성되어 있다. 플라즈마에 잠기는 ion extraction part의 외부 전극에 Al2O3를 코팅하여 플라즈마 교란을 최소화하였다. 이온들의 공간적 분포를 측정하기 쉽게 하기 위하여 ion extraction part를 이동하여도 질량여과기를 통과한 후에 접속되는 초점의 위치가 Faraday ion collector 에 고정되도록 ion optical system을 설계하였다. Extracting electrode에 의하여 가속된 이온들이 sector magnet에 들어갈 때 평행이 되게 하기 위하여 여러 개의 미세구조를 갖는 Mo grids를 사용하고 immersion lens를 넣어서 이온 광학 시스템을 구성하였다. extraction electrode와 sector magnet 사이에 보조 electrode를 하나 더 넣어서 extracting electrode와 보조 electrode 사이에 immersion lens를 만들었다. 질량여과기로는 permanent magnet sector와 time-varying electrical field를 결합하여 사용하였다. Extracting electrode에 1kV 정도의 전압을 인가하여 이온들을 가속시키고 sector magnet에 톱니파 형태의 전압을 인가하여 mass spectrum을 얻었다. 이온 질량분석기를 플라즈마 장치에 적용하여 질량분해능 등의 특성을 연구하였다. Hot cathode discharge와 inductively coupled RF discharge에서 발생된 질소 플라즈마를 구성하는 이온들의 종류와 그 구성비율을 연구하였다.