• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.564-567
• /
• 2012

Optical fibers are going to be used for telecommunication, image fibers, sensors under irradiation in nuclear power plants and various irradiation facilities. Especially, Temperature detection sensors using Raman light scattering, temperature or strain sensors using fiber gratings, magnet-optical sensors using photo-magnetic effect, are already commercialized. However, When fibers are exposed to ionizing radiation, color centers are formed in fibers which reduces their light transmission, and it is limited in applying under radiation environments. In this study, $Co^{60}$ gamma-ray induced optical attenuation on Ge-doped single mode(SM) fiber has been measured. Gamma-ray is irradiated for 4hours at the dose rate of 0.5kGy/hr, 2kGy/hr, 8kGy/hr. Consequently, gamma-ray induced loss based on radiation effects in Ge-doped SM fiber occur precisely. Furthermore, dose rate effect that the higher dose rate in the same total dose, the more increase loss of optical fiber and annealing effect that the higher the loss after irradiation, the more increase the recovery rate of the loss are observed in the fiber. This results plan to make use of bases in the study of the radiation-hardened optical fiber.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.1
• /
• pp.57-66
• /
• 2001

The floating islands have been constructed for the water quality improvement and the biodiversity conservation in an disturbed aquatic ecosystem. We made floating islands consisted of a special float and substrates of coconut fibers implanted with four emergent macrophytes such as Phragmites australis, Zizania latifolia, Iris pseudoacorus, Typha angustifolia. Vegetation structure and plant growth were compared between on the floating islands and on ground in order to select suitable plants for the construction of floating islands. Emergent-macrophytic vegetation on the floating islands showed lower coverages and higher plant biodiversity due to natural introduction of various hydrophytes and hygrophytes. Shoot density was increased on floating islands except for Zizania latifolia. From the point of coverage and density of plants, Phragmites australis and Iris pseudoacorus were suitable for floating islands. Total biomass of emergent macrophytes was decreased on the floating islands. The belowground/aboveground biomass ratio of floating islands was higher than that of the ground. Out of planted macrophytes, Iris pseudoacorus with a high belowground/aboveground biomass ratio could be evaluated a suitable plant for the floating islands because a plenty of its root is profitable to adapt with the nutrient-limited environment of floating islands.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.2
• /
• pp.111-115
• /
• 1989

In order of remove Cd by plants cultivation in the cadimum contamination soil, six fibers, four flowering and two sapling plants were cultivated at Cd treated soil, adjusted to 15 ppm. The Cd contents of plants and absorbed Cd concentration in plant, and residual Cd in soil were analyzed. The results obtained are as follows: 1. The Cd content in marigold was the highest, 161.7ppm, 22.5 times higher than rice. The Cd contents in plants was in the order of 58.3 ppm in sedge, 58.0 ppm in coreopsis, 43.5 ppm in sunflower, 38.3 ppm in scruber, and 31.9 ppm in flax. 2. The absorbed Cd in Popuaus alba x P. glandulosa was the highest, 24.11 mg/pot, 35.5 times higher than rice. The absorbed Cd by plants were in the order of 10.86 mg/pot in italianpoplar, 9.61 mg/pot in marigold, and 9.04 mg/pot in kenaf. 3. The residual Cd contents was the lowest in Popuaus alba x P. glandulosa soil and cotton followed. 4. Absorbed Cd dontent in plants was negatively correlated with the residual Cd concentration in soil.

• Textile Coloration and Finishing
• /
• v.28 no.2
• /
• pp.118-123
• /
• 2016

The use of natural organic dyes obtained from renewable resources such as plants and trees has the potential for not only preserving petrochemicals but also all-endangered environment for coming next generations. In spite of inferior fastness, natural dyes can be employed in the colouration of natural as well as synthetic fibers. Recently, the potentiality of using natural dyes in colouration with additional UV-protection and antimicrobial properties has been reported. This study is aimed to investigate the effect of Zinc compounds compared to another metallic compounds as mordants on the dyeing properties of natural dye extracted from mulberry leaves and coffee. In this study, the results showed Zinc compounds was expose that is more similar than other mordants in washing fastness through a repeated experiment. Also, Zinc is the environmental impact is less material compared with other mordants, essential edibility minerals ingredient that is necessary in human body.

• The Korean Journal of Ecology
• /
• v.24 no.6
• /
• pp.381-384
• /
• 2001

A preliminary comparative histodimensional studies, such as wood to bark ratio, total area of parenchyma cells and bast fibers, height and diameter of vascular rays, pith diameter and phenological parameters, height of the plant, perimeter of the stem, dry weight of the stem and leaves have been investigated for the low and high rubber bearing Guayule plants growing in same and different climatic regions of India. A plausible correlation is found between the percentage of rubber content and anatomical characters in the investigated varieties.

• Journal of the Korean Ceramic Society
• /
• v.32 no.8
• /
• pp.893-900
• /
• 1995

The porous wollastonite ceramics were fabricated after firing calcium silicates, obtained using natural resources and by-products of power plants by hydrothermal synthesis, without organic fibers or asbestos for reinforcement agent. A specimen from diatomite as a SiO2 staring raw material had the highest strength owing to normal grain growth and good densification from homogeneous sperhcial C-S-H hydrates. A specimen from SiO2 sol as a SiO2 starting raw material showed tobermolite, but fly ash and mixed system did xonotlite after hydrothermal synthesis. The specimen from fly ash showed the lowest firing shirikage and strength changes in the firing range from 50$0^{\circ}C$ to 120$0^{\circ}C$. The other phases in all specimens changed to wollastonite phase after firing at 100$0^{\circ}C$. Also the average pore size was distributed from 0.2${\mu}{\textrm}{m}$ to 2${\mu}{\textrm}{m}$.

• Journal of the Korean Society of Safety
• /
• v.13 no.1
• /
• pp.92-97
• /
• 1998

Malodorous gases give discomfort and harm to laborers and residential neighborhoods and therefore, the removing odor materials emitted from plants and industrial facilities is important subject. The main ingredients of alkali odor are $NH_3$ and $CE_3SH$. The adsorption characteristics of odors were studied using four different activated carbon fibers(ACF) and active carbon(AC). Alkali odor was removed by using ACF impregnated with $H_3PO_4$ and $H_2SO_4$ and treated with $HNO_3$ and NaOH. The experimental result showed that ACF has a higher removal efficiency than AC. The adsorption capacity was increased with the impregnation and surface treatment, and $H_2SO_4$ was the best impregnant for the removal of alkali odor.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.362-368
• /
• 2018

Purpose: Self-sufficiency in paper production is desired in Nigeria. This study was aimed at evaluating the performance of a locally fabricated batch pulp digester. Methods: The pulp yields of sheaths generated as waste in the production of bamboo (Bambusa vulgaris) laminates were determined at different liquor concentrations and treatment time after preliminary experiments to ascertain the conditions under which the sheath started to pulp. Moreover, the optimum pulping conditions and fiber characteristics were determined and estimated, respectively, to ascertain the pulp fiber suitability for paper production. Results: An optimum pulp yield of 65.1% was obtained at 50% NaOH and 25% $Na_2S$ liquor concentration (w/w) when the cooking time was 4 h. The results of fiber characterization of the pulp indicated an average fiber length of 2.19 mm with a low Runkel ratio of 1.63, both of which signify the suitability of the pulp for medium quality paper production. Conclusions: Softwood pulp can be blended with the fibers to improve the strength of the produced paper; further investigation should be carried out to use other non-woody plants for pulp and papermaking.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.169-169
• /
• 2011

Xylans are polysaccharides present in large amounts in cell walls of land plants. However, during kraft cooking, a high portion of hemicelluloses including xylans are dissolved in the cooking liquor. In the current trend for a more effective utilization of biomass, attention has been paid to the exploitation of xylans as strength-enhancing additives for paper. It is believed that surface xylan adds flexibility to the cell wall/fiber surface, resulting in stronger fiber-fiber joints or greater contact area between the fibers. Accordingly, there is proposal for a new pulping process involving the extraction of xylan prior to pulping, followed by their re-adsorption on the unbleached pulp. A suitable bleaching process should be employed then, which ought to does not only improve the brightness of the pulp, but also remain the effect of the adsorption of xylan on pulp fibers. The objective of this research was to investigate the impact of hydrogen peroxide bleaching on the properties of unbleached hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (brightness, post color number, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. In the meantime, the influence of process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.3
• /
• pp.99-107
• /
• 1965

Thirteen varieties of hemp, Cannabinus sativa L., consisting of four Italian, one Japanese and eight local varieties were used in the study on the fiber content and a satisfactory selection for the higher-fiber-yielding plants. In addition, the relationship among fiber contents at the ball setting stage, and at the maturity stage, primary fiber content, and total fiber content were determined. The results of the study are summarized as follow: 1. Fiber weight of the matured male plant expressed as percentage of the fiber weight to dried stems varied from 12.09 to 26.71 percent for the Italian varieties, 14.25% for the Japanese variety and ranged from 6.59 to 16.79 for the local varieties. It was shown that on the average, Italian varieties contained more fiber compared with the other varieties. 2. On the same basis, the average percent age of fiber for Italian male plants was 20.77 while it was 20.96 for female plants. For the Japanese variety, similar figures were 14.24 for male plants and 15.43 for female plants. By comparison, the average percent fiber for the male plants of Korean varieties was only 10.34 but averaged 16.79 for female plants. In this experiment, female plants contained a greater percentage of fiber than male plants. 3. Statistically significant correlations were obtained between fiber content at the ball setting stage and fiber content of the mature plant. The correlation coefficient was r=0.942＊＊, while the regression equation was Y=0.28+1.03X. These data indicate that plant. selection by early testing at the ball setting stage is an effective method for the improvement of fiber content. 4. The correlation between primary fiber content and total fiber content was r=0.913＊＊, with a regression equation of Y=12.01+1.20X. It should thus be possible to obtain plants of higher total fiber content at maturity by the selection of plants which have a higher content of primary fiber at the ball setting stage. 5. From a study of the transverse sections from the hemp plant it was shown that Italian varieties have wide bands of primary and secondary fibers with narrow areas of woody material, while both Korean local varieties and Japanese varieties have narrow bands of primary and secondary fiber and wide areas of woody material. For hemp improvement, it is certain that a variety which has a narrow area of woody substances and wide area of fiber in its stem should be selected.