• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.739-743
• /
• 2014

This work characterizes 'Yeolha', a new strawberry (Fragaria ${\times}$ ananassa Duch.) cultivar that was released by the Highland Agriculture Research Center, RDA, in 2013. This cultivar originated from a 2008 cross between 'Goha' and 'Elsinyo' and showed excellent ever-bearing characteristics including continuous a flowering habit under long-day and high temperature conditions. It was originally named 'Saebong No. 5' after examining its characteristics and productivity in summer culture from 2010 to 2013. After two regional adaptability tests in 2012, it was selected as an elite cultivar and renamed 'Yeolha'. The general characteristics of 'Yeolha' include a semi-spreading plant type, elliptic leaves, and strong vigor in growth. Its fruit is conical and red. T he s oluble s olids content of 'Yeolha' is 8 .6%, w hich is 0.6% h ig her than t hat of 'Flamenco', b ut f ruit hardness is lower than that of 'Flamenco'. The average fruit weight of 'Yeolha' is about 12.1 g and the marketable yield is $28,133kg{\cdot}ha^{-1}$, which is 117% higher than that of 'Flamenco'. 'Yeolha' is resistant against Fusarium wilt. In addition, 'Yeolha' is suitable for four-season cultivation as a high harvesting cultivar because it shows continuous flowering under long-day and high temperature conditions.

• Korean journal of applied entomology
• /
• v.7
• /
• pp.39-51
• /
• 1969

The study involved determination of resistance levels of spider mites ta argano-phosphates using topical application and slide dip techniques; laboratory serening tests of alternative acaricides using an O/P resistant strain and a field trial of the screened materials. 1. Strains of Tetranychus were from Timaru(TR), Havelock Narth (HNR), Lincaln (LN). Germany (GR, GN). Comparisons of the resistant strains and normal strains at the LD50 and LC50 levels were as follows : (a) Using the topical application tochnique; with Parathian. resistant levels of the GR. TR and HNR strains of T. urticae were respeativuly, 1035. 484 and 452 times as resistant' as the LN strain. (b) Using the slide dip technique; with Phosdrin, resistant of GR, TR and HNR strains of T. urticae were 635, 274 and 266 times greater respeativuly, than the GN strain. 2. The laboratory sereaning tests were carried out far their contact plus stomach and residual effect to assess the toxicities of eleven alternative materials which would be used far control of O/P resistant strain of T. urticae. The acaricide groups represented were 3 organo-chlorines (Spidex, Kelthane and C 8514), 2 nitrophenyls (UC 19786 and Morocide), 2 cyclic carbonates(Eradex and Morestan). I carbamate (UC2004 7A), 1 mixture of carbamate and orano-chlorine and 2 other chemicals (C 8677 and M2527). From all acaricide tested. Kelthane and Morocide were the most effective, folowed by Spidex and M2527. Morestan, C8514. C8677 and RS 143 were intermediate, but Eradex, UC 19786 and UC 20046A were poor. 3, The number of sapmles required for estimation of the population in the field evaluation of acaricidal effects was one giving the highest practical precision. It was decided, after preliminary sampling trials. to use samples of 30 leaves per replicate which gave a $5.7\%$ standard error. 4. In the field trials, Morocide applied at the $0.05\%\;and\; 0.04\%$ a. i. conc. to black currant trees gave excellent control of O/P resistant population of T. urticae for about 12 days, but Morocide 0.025 and Kel thane $0.02\%$ a. i. cone. gave efficient control for about 6 days. In other words. first applications of Kel thane ane Moroeide gave very high degrees of control of O/P resistant population of the two-spotted spider mite. However, the results indicate that secondary application would sometimes be necessary. There was no foliage damage of black Currants and strawberries by either acaricides at the concentrations used. Acknowledgment ... The authors are grateful to: Dr. R. P. pottinger, Senior Lecturer in Agricultural Zoology. Lincoln college. New Zealand. for his helpful assistance in aiding with the organization of thd field work. Department of agriculture officers for mite colonies. Mr. D. A. Slade, Technical Advisor. Fruitgrowers' Federation (now at Massey University) for his assistance and provision of mites for testing. Mr T. McRae of Timaru for permission to use his crops for field tests. The following chemical companies and I or their New Zealand agents for so readily supplying samples of acarides; Ivan Watkins-Dow Limited. Fruitgrowers Chemical Company Limited. Henry H. York & company (New Zealand). Shell Oil (New Zealand) Limited.

• The Korean Journal of Zoology
• /
• v.8 no.2
• /
• pp.89-127
• /
• 1965

1. This report is on the outcome of observation made up the breeding process of Narcissus flycatcher, Muscicapa narcissina zanthopygia, using 15 ness-boxes at Seoul and Kwang Nung Experimental forest in 1964, and the relevant feeding habit was studied by the collar method of wrapping the necks of thenestlings for 50-60 minutes or more in some cases from 1963 to 1964. 2. The Narcissus flycatcheris a common summer resident throughout Korea arriving at the end of April. The earliest data of arrival of this species in Seoul, is April 26, 1964. They migrate southward from the later part of September to early part of October. 3. In a week after their arrival , they start to build nest after a brief courtship. Male and female prepare their nest ina nestboxes in 4 or 5 days. Nests are usually found in the moss, which provide definite frame-work. The inner side of the nest is usually composed of roots of Gramineae or leaves of pine, oak or other broad leave tree. 4. The laying period is generally from the later part of April to the middle of June : and the number of eggs laid is from 3 to 8 , therefore 5 in average : eggs are pink with traces of milky yellow blending of light auburn and orange red spots and chicken-egg-like in shape. 5.The incubation takes place for 7-12 days from the middle part of May to the middle of June, in the order of male and female . The hatching rate tends to increase in proportion to clutch size. 6. The feeding period usually lasts 15 days in average from the early part of June to the middle of July and the feeding urge tends to increase in proportion to brood size. 7. The animals invading into their nest-boxes are red ants, chipmunks, bees , barkbeetles and philippine red-tailed shirkes, etc. 8. On the basis of analysis covering 714 birds in 31 nests, the food they consumed during the nesting period of nestlings were mostly of animal matters composing of : insect larvae form-39. 88% insect adult form 36.26%, insect pupae-0.19%, spider-17.75% and other animal matters 5.92% , Besides a small amount of plant pieces were found . As to the insect larvae, Lepidoptera was the largest in the content followed by Hymenoptera , Orthoptera and Coleoptera. As to the insect adult, Diptera was the largest in the content followed by Coleoptera, and Hymenoptera. In view of forest protection, noxious insect was of 69.38%, useful insect 4.39%, and spider 17.75%. 9. The rich assortment of its food, the ability of acquiring various insect (adults as well as larvae), its destruction of great numbers of harmful insects , and its quick assimilation artificial nesting with the nest-boxes of 2.5-3cm entrance hole employed, allow us to conclude that the flycatcher may be successfully employed in the elimination of fores pests. The above results are only that part obtained near Seoul in the middle of Korea, however, if we would extend the scheme to other broad areas using similar techniques, the nest-boxes could not only be well used by the birds, but also it would help to prevent the increase of harmful. insects.

• Korean Journal of Agricultural Science
• /
• v.13 no.2
• /
• pp.255-264
• /
• 1986

The objectives of this study were to examine the viscoelastic behaviour of stem samples of rice in force-relaxation and rheological model to represent its relaxation behaviour, and to study the effects of rate of deformation and initial deformation on the relaxation time. The results were as follows; 1. In the process of loading and unloading, there is any plastic deformation so called elasto-plastic hysterisis. 2. Loading and unloading of stem of rice for several cycles has also shown the reduction of plastic or residual deformation and work hardening. 3. The relaxation behaviour of stem of rice in compression may be described by a generalized Maxwell model consisting of three Maxwell units in parallel. The rheological equation of such a model is given as $$F(t)=C_1e^{{-t/{\tau}}_1}+C_2e^{{-t/{\tau}}_2}+C_3e^{{-t/{\tau}}_3}$$ 4. Force relaxation always increased with increasing rates of deformation and initial deformation.

• Plant Journal
• /
• v.10 no.3
• /
• pp.39-44
• /
• 2014

The gas turbine thermal efficiency has been predicted when the compressor pressure ratio increases from the previously set 13.5. Thermal efficiency has been predicted from 14.2 up to 18.2 at which the turbine work reaches its maximum value on the assumption that isentropic efficiency of the compressor and the turbine are constant using the operating data at the pressure ratio of 13.5. 35.11% of thermal efficiency has been acquired by the performance test when the pressure ratio increased to 16.2 since replacing the compressor low pressure stages. It's been approved that predicting thermal efficiency using the operating data at the pressure ratio of 13.5 is useful within 7.86% of tolerance as the figure measured by the performance test.

• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.11-11
• /
• 2014

Fungal pathogens have huge impact on health and economic wellbeing of human by causing life-threatening mycoses in immune-compromised patients or by destroying crop plants. A key determinant of fungal pathogenesis is their ability to undergo developmental change in response to host or environmental factors. Genetic pathways that regulate such morphological transitions and adaptation are therefore extensively studied during the last few decades. Given that epigenetic as well as genetic components play pivotal roles in development of plants and mammals, contribution of microbial epigenetic counterparts to this morphogenetic process is intriguing yet nearly unappreciated question to date. To bridge this gap in our knowledge, we set out to investigate histone modifications among epigenetic mechanisms that possibly regulate fungal adaptation and processes involved in pathogenesis of a model plant pathogenic fungus, Magnaporthe oryzae. M. oryzae is a causal agent of rice blast disease, which destroys 10 to 30% of the rice crop annually. Since the rice is the staple food for more than half of human population, the disease is a major threat to global food security. In addition to the socioeconomic impact of the disease it causes, the fungus is genetically tractable and can undergo well-defined morphological transitions including asexual spore production and appressorium (a specialized infection structure) formation in vitro, making it a model to study fungal development and pathogenicity. For functional and comparative analysis of histone modifications, a web-based database (dbHiMo) was constructed to archive and analyze histone modifying enzymes from eukaryotic species whose genome sequences are available. Histone modifying enzymes were identified applying a search pipeline built upon profile hidden Markov model (HMM) to proteomes. The database incorporates 22,169 histone-modifying enzymes identified from 342 species including 214 fungal, 33 plants, and 77 metazoan species. The dbHiMo provides users with web-based personalized data browsing and analysis tools, supporting comparative and evolutionary genomics. Based on the database entries, functional analysis of genes encoding histone acetyltransferases and histone demethylases is under way. Here I provide examples of such analyses that show how histone acetylation and methylation is implicated in regulating important aspects of fungal pathogenesis. Current analysis of histone modifying enzymes will be followed by ChIP-Seq and RNA-seq experiments to pinpoint the genes that are controlled by particular histone modifications. We anticipate that our work will provide not only the significant advances in our understanding of epigenetic mechanisms operating in microbial eukaryotes but also basis to expand our perspective on regulation of development in fungal pathogens.

• Journal of Life Science
• /
• v.17 no.1 s.81
• /
• pp.120-124
• /
• 2007

Fusarium proliferatum KGL0401 was previously isolated from Physalis alkekengi var. francheti plant roots and exhibited higher GA productivity than wild type Gibberella fujikuroi. The :tim of this work was to find out an optimal culture condition for GA production. Various carbon(fructose, glucose, lactose, maltose, sucrose) and nitrogen($KNO_3$, urea, glycine, $NaNO_3,\;NH_4Cl$) sources were used for this study. GAs activities were analysed by gas chromatography and mass spectrometry(GC-MS). The highest yield of $GA_3$ was found in the growth medium supplemented with sucrose as carbon source and $NH_4Cl$ as nitrogen source. The optimum carbon-nitrogen concentration for $GA_3$ production was found to be 0.5 M:0.17 M. Supernatant was prepared from the culture fluid of F. proliferatum KGL0401 cultured for 7 days at 3 0'E and the 10 ul supernatant was treated with 2 leaf-rice seedling.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.207-213
• /
• 2009

The quality of tap water on the whole water-supply system, from a large filtration plant to a private faucet, has to be guaranteed the standards of drinking water. At this point in time, however, the supply process of the tap water has not been monitored and managed scientifically. The piped water, especially the most small-scale reservoirs(underground or overhead type) are always exposed to various contaminations and impurities. Recently monitoring systems of water-quality were spread on some large filtration plants or distributing reservoirs. In particular, the water quality monitoring method using the internet is adopted into some local government whose inhabitants can check up the water quality anytime and anywhere. The construction of this system that has to apply a large scale needs, and has a limitation on the small water-supply system, such as apartments, public facilities and small-scale underground or overhead reservoirs. In this work, we suggest the integration system of individual water-quality sensor modules that have a low price. By using the developed integration system and online monitoring program operated on the internet, the system managers of reservoirs can monitor and manage water-quality characteristic values of drinking water in online. Since the proposed system was modularized, the system can be applied easily into various reservoirs with a low cost and regardless of its scale, small or large.

• Journal of Radiation Protection and Research
• /
• v.26 no.1
• /
• pp.19-26
• /
• 2001

In order to assess the atmospheric dispersion for the accidental releases of nuclear power plants, in calculating X/Q values in the XOQAR and PAVAN codes which are based on Reg. Guide 1.145, the X/Q and frequency values are plotted on log-normal paper. Starting with the highest X/Q value of this plot, the codes compare the slope of the line drawn from this point to every other point within an increment containing ten X/Q values. If there are fewer than ten values, only the number available are used. The coefficients that produce the line with the least negative slope are saved. The end point of this line is used as the next starting point, from which slopes to the points within the next increment, containing ten X/Q values, are compared. The X/Q values corresponding to the cumulative frequency values 0.5%, 5% or 50% are calculated to search for the $0{\sim}2$ hour X/Q value that tends to be a very conservative value. In this work, a fuzzy logic inference method is used for nonlinear interpolation of the X/Q values versus the cumulative frequency. The fuzzy logic inference method is known to be a food technique for nonlinear interpolation. The proposed method was applied to a potential accidential radioactive release of the Yonggwang nuclear power plant, which gives more realistic X/Q values.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1169-1174
• /
• 2015

Risk-Risk-based inspection (RBI) has been developed in order to identify risky equipments that can cause major accidents or damages in large-scale plants. This assessment evaluates the equipment's risk, categorizes their priorities based on risk level, and then determines the urgency of their maintenance or allocates maintenance resources. An earlier version of the risk-based assessment software is already installed within the equipment management system; however, the assessment is based on examination by an inspector, and the results can be influenced by his subjective judgment, rather than assessment being based on failure probability. Moreover, the system is housed within a server, which limits the inspector's work space and time, and such a system can be used only on site. In this paper, the development of independent risk-based assessment software is introduced; this software calculates the failure probability by an analytical method, and analyzes the field inspection results, as well as inspection effectiveness. It can also operate on site, since it can be installed on an independent platform, and has the ability to generate an I/O function for the field inspection results regarding the period for an optimum maintenance cycle. This program will provide useful information not only to the field users who are participating in maintenance, but also to the engineers who need to decide whether to extend the lifecycle of the power machinery or replace only specific components.