• Journal of Microbiology and Biotechnology
• /
• 제20권9호
• /
• pp.1348-1350
• /
• 2010

Conidia of Beauveria bassiana ARSEF-7060, produced in millet amended with plant oils such as sunflower, corn, or cotton seed oil, were exposed to $45^{\circ}C$ of wet heat for 90 min. Conidia from millet+corn oil medium had the highest thermotolerance [$LT_{50}$ (median survival time): 45.7 min]. The mycotized millet grains were coated with each of the same plant oils as a granular formulation and subjected to $50^{\circ}C$ of dry heat for 8 h. Corn oil coating ($LT_{50}$: 8.68 h) was superior to sunflower and cotton seed oil coatings, suggesting the feasibility of using corn oil to increase conidial thermotolerance.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권10호
• /
• pp.1511-1520
• /
• 2019

Objective: The present study was conducted to select a plant oil without inhibitory effects on rumen fermentation and microbes, and to determine the optimal supplementation level of the selected oil in a series of in vitro studies for dietary application. Then, the selected oil was evaluated in a feeding study using Thai crossbred beef cattle by monitoring growth, carcass, blood and rumen characteristics. Methods: Rumen fluid was incubated with substrates containing one of three different types of plant oil (coconut oil, palm oil, and soybean oil) widely available in Thailand. The effects of each oil on rumen fermentation and microbes were monitored and the oil without a negative influence on rumen parameters was selected. Then, the dose-response of rumen parameters to various levels of the selected palm oil was monitored to determine a suitable supplementation level. Finally, an 8-month feeding experiment with the diet supplemented with palm oil was carried out using 12 Thai crossbred beef cattle to monitor growth, carcass, rumen and blood profiles. Results: Batch culture studies revealed that coconut and soybean oils inhibited the most potent rumen cellulolytic bacterium Fibrobacter succinogenes, while palm oil had no such negative effect on this and on rumen fermentation products at 5% or higher supplementation level. Cattle fed the diet supplemented with 2.5% palm oil showed improved feed conversion ratio (FCR) without any adverse effects on rumen fermentation. Palm oil-supplemented diet increased blood cholesterol levels, suggesting a higher energy status of the experimental cattle. Conclusion: Palm oil had no negative effects on rumen fermentation and microbes when supplemented at levels up to 5% in vitro. Thai crossbred cattle fed the palm oil-supplemented diet showed improved FCR without apparent changes of rumen and carcass characteristics, but with elevated blood cholesterol levels. Therefore, palm oil can be used as a beneficial energy source.

• 한국건설관리학회논문집
• /
• 제8권1호
• /
• pp.116-123
• /
• 2007

최근 오일 가스 플랜트 분야는 국제 유가의 상승, 에너지 수요의 증가로 인하여 프로젝트 발주가 증가하고 있으며, 중동지역과 전 세계 지역으로 시장규모가 증대되고 있다. 오일 가스 플랜트는 제조 및 처리공정과 기술개발에 따른 라이센스 관리 및 기술관리가 프로젝트의 성패에 중요한 사항이다. 오일 가스 플랜트의 경우 다수의 해외공사 수행 형태를 가지며 해외 선진 업체와의 경쟁이 더욱 중요하다. 이러한 시장에서 기술 경쟁력과 기술 우위를 확보하기 위해서는 기술개발에 따른 체계적인 경영 방식을 도입하여야 한다. 하지만 국내 오일 가스 플랜트 업체의 경우 해외 선진 업체보다 라이센스, 설계단계의 기술 경쟁력이 부족하며 '기술 투자 비용 대 효과를 최대화' 하는 요소기술의 기술경영 도입이 어려운 현실이다. 이는 기술개발 및 관리의 인식 부족과 연구개발 인프라 구축에 따른 부담이 커서 장기적인 기술전략이 부족하기 때문이다. 따라서 본 연구에서는 오일 가스 플랜트 산업의 대외 경쟁력 확보를 위한 기술경영 도입방안을 분석함으로서 중장기적 기술개발 지원과 기술경영 도입방안을 제시하였다.

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.5-9
• /
• 2016

The purpose of this paper is to define criteria to be used as part of the engineering design for an oil sands plant equipped with the steam assisted gravity drainage process. In this effort, the oil treatment process of an oil sands plant on a pilot scale was focused for detailed investigation. The thermodynamic properties of the process fluid, which is mainly composed of bitumen and water, were estimated with the CPA model. The commercial tool aspen HYSYS was used for the analysis throughout this work along with the provided input data and some necessary assumptions. From the simulation results, the heat and mass balances for a 300 BPD plant were established in order to define standard data for its modular design. In particular, the basis of design for equipment size, heat transfer areas, capital cost and operation cost was extensively discussed.

• 한국식품조리과학회지
• /
• 제26권2호
• /
• pp.206-213
• /
• 2010

In this study, the antibacterial activities of essential oil from Zanthoxylum schinifolium against four Gram-positive bacteria and six Gram-negative bacteria were investigated. The antibacterial activity of the oils was determined using the agar-well diffusion assay, MIC (minimum inhibitory concentration) and MBC (minimum bactericidal concentration). In particular, essential oil from Z. schinifolium showed higher antibacterial activity against Gram-positive bacteria than against Gram-negative bacteria. Essential oil from Z. schinifolium displayed large inhibition zones especially against Bacillus cereus (31 mm). At concentrations between 0 and $20\;{\mu}g/mL$ the oils showed an antibacterial effect against both Gram-negative and Gram-positive bacteria. The minimum inhibitory concentration (MIC) values against nine bacteria ranged from 1.25 to $5\;{\mu}g/mL$. The minimum bactericidal concentration (MBC) values against eight bacterial ranged from 2.5 to $20\;{\mu}g/mL$, except Shigella sonnei. Furthermore, our finding on the antibacterial activities of essential oils from Zanthoxylum schinifolium validated the use of this plant for medical purposes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1015-1019
• /
• 2001

There are several bearing systems at the large steam-turbines in thermal power plant. The bearing system is one of the most important parts of rotating machinery. The steam turbine vibrations mainly depend on the bearing oil and the shaft alignment condition. This paper describes on the steam turbine abnormal vibration due to the oil whip in terms of the shaft alignment in the thermal power plant.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.136-141
• /
• 2011

In a power plant, an oil and steam leakage is generated once in a while. This is because the operating temperature and pressure of oil are very high. It is very difficult to monitor oil leakage, because oil leakage is almost invisible. Therefore a method to oil leakage detecting quickly and accurately is needs. In this paper, we proposed the method for the detecting oil leakage by using image processing and CCTV. To test the performance of this technique, experiments have been performed for simple case. Results show that the proposed technique is quite powerful in the oil leak detection.

• 생명과학회지
• /
• 제29권12호
• /
• pp.1351-1357
• /
• 2019

본 연구는 동물성 지방 대체제로서 식물성유 유화물인 올리브유(OPP), 대두유(SPP) 및 카놀라유(CPP) 유화물을 첨가한 돈육 패티의 품질 특성을 조사하였다. OPP, SPP 및 CPP의 수분 함량이 CON보다 높고, 지방 함량은 낮았다. OPP, SPP 및 CPP는 CON보다 보수력, 수율, 수분 보유율, 지방 보유율이 높았으며, 직경 감소율과 수축율은 낮았다. 가열 전후의 돈육 패티의 백색도와 적색도는 CON이 OPP, SPP 및 CPP보다 높고, 가열 전 돈육 패티의 황색도는 OPP가 가장 높았다. 돈육 패티의 포화지방산은 palmitic acid가 가장 많이 함유되어 있었다. 불포화지방산은 CON (42.84%), OPP (65.41%), CPP (48.63%)의 경우 oleic acid가 가장 많았으며, SPP는 linoleic acid (41.17%)가 가장 많이 함유되어 있었다. 돈육 패티의 불포화지방산 함량은 식물성유 유화물의 대체로 증가하였다. 경도, 응집성 및 저작성은 시료들 사이에 차이가 없었으며, 탄력성은 CON보다 OPP, SPP 및 CPP가 높았다. 맛, 풍미, 전체적인 기호도는 OPP 및 CPP가 CON 및 SPP보다 높게 나타났다. 따라서 식물성유를 겔화시켜 동물성 지방을 대체하면 이화학적·관능적 특성이 향상되고 지방산 조성이 개선되어 소비자들이 요구하는 건강에 유익한 저지방 육제품의 제조가 가능하다.

• 한국응용곤충학회지
• /
• 제26권4호
• /
• pp.267-268
• /
• 1987

토양에 첨가한 8종의 Oil cake 중 Margosa, Undi, Karanj cake은 생강뿌리썩음병의 발생을 억제하였다. 생강수량의 증진효과는 Karanj, Roselle, Mustard cake의 순으로 높았다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.269-272
• /
• 2006

The use of packaged skid in oil and gas plant has increased dramatically over the decades, replacing loose supply equipment. Most equipment is installed on structural skid in manufacturer's shop. As Oil and Gas Plants are constructed at inaccessible area, the demands of packaged skids are increased. The packaged skid have advantages comparing to loose supply equipment in inaccessible area. The packaged skid is small complex plant consists of process, mechanical, piping, instrument, electrical and structural steel. This paper examines advantages and problems of packaged skid, based on previous experience. EPC company consider key factors such as manufacturing period, construction periods, equipment quality and costs.