• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.273-277
• /
• 2012

The vacuum drying process for drying of paper in current transformers was modeled with an aim to develop an understanding of the drying mechanism involved and also to predict the water collection rates. A molecular as well as macroscopic approach was adopted for the prediction of drying rate. Ficks law of diffusion was adopted for the prediction of drying rates at macroscopic levels. A steady state and dynamic mass transfer simulation was performed. The bulk diffusion coefficient was calculated using weight loss experiments. The accuracy of the solution was a strong function of the relation developed to determine the equilibrium moisture content. The actually observed diffusion constant was also important to predict the plant water removal rate. Thermo gravimetric studies helped in calculating the diffusion constant. In addition, simulation studies revealed the formation of perpetual moisture traps (loops) inside the CT. These loops can only be broken by changing the temperature or pressure of the system. The change in temperature or pressure changes the kinetic or potential energy of the effusing vapor resulting in breaking of the loop. The cycle was developed based on this mechanism. Additionally, simulation studies also revealed that the actual mechanism of moisture diffusion in CT's is by surface jumps initiated by surface diffusion balanced against the surrounding pressure. Every subsequent step in the cycle was to break such loops. The effect of change in drying time on the electrical properties of the insulation was also assessed. The measurement of capacitance at the rated voltage and one third of the rated voltage demonstrated that the capacitance change is within the acceptance limit. Hence, the new cycle does not affect the electrical performance of the CT.

• Journal of Species Research
• /
• v.5 no.2
• /
• pp.223-234
• /
• 2016

As a subset work for the collection of indigenous prokaryotic species in Korea, 38 actinobacterial strains were isolated from various environmental samples obtained from plant root, ginseng cultivating soil, mud flat, freshwater and seawater. Each strain showed higher 16S rRNA gene sequence similarity (>99.1%) and formed a robust phylogenetic clade with closest actinobacterial species which were defined and validated with nomenclature, already. There is no official description on these 38 actinobacterial species in Korea. Consequently, unrecorded 37 species of 24 genera in the 12 families belonging to the order Actinomycetales of the phylum Actinobacteria were found in Korea. Morphological properties, basic biochemical characteristics, isolation source and strain IDs are described in the species descriptions.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.2
• /
• pp.102-111
• /
• 2010

Molten carbonate fuel cell (MCFC) power plants are one of most attractive electricity generation systems for the use of biogas to generate high-efficiency ultra-clean power. However, MCFCs are considerably more expensive than comparable conventional electricity generation systems. The commercialization of MCFCs has been delayed more than expected. After being effective in the Kyoto protocol and considerably increasing the fossil price, the attention focused on $CO_2$ regression and renewable energy sources has increased dramatically. In particular, the commercialization and application of MCFC systems fed with biogas have been revived because of the characteristics of $CO_2$ collection and fuel variety of MCFCs. Better economic results of MCFC systems fed with biogas are expected because biogas is a relatively inexpensive fuel compared to liquefied natural gas (LNG). However, the pretreatment cost is added when using anaerobic digester gas (ADG), one of the biogases, as a fuel of MCFC systems because it contains high $H_2S$ and other contaminants, which are harmful sources to the MCFC stack in ADG. Thus, an accurate economic analysis and comparison between MCFCs fed with biogas and LNG are very necessary before the installation of an MCFC system fed with biogas in a plant. In this paper, the economic analysis of an MCFC fed with ADG was carried out for various conditions of electricity and fuel price and compared with the case of an MCFC fed with LNG.

• Advances in Traditional Medicine
• /
• v.3 no.3
• /
• pp.111-122
• /
• 2003

Plants of the genus Hypericum (Family - Hypericaceae) are herbs, shrubs or small trees and are distributed chiefly in the temperate regions of the world. About 400 different species of Hypericum are available throughout the globe and 20 species occur in India, including a few cultivated in gardens. Almost all plants of the genus Hypericum are widely used in folk medicine. Several potent phytoconstituents from different Hypericum species have led to the isolation of antibacterial, antifungal and cytotoxic compounds. With the development of resistance and cross resistance with different microorganisms and the evolution of so many deadly diseases the screening and evaluation of the phytoconstituents so much so the development of varied phytoconstituents for the drug development for these deadly diseases is utmost essential in every aspects. The present review on the antimicrobial use of different Hypericum reports the findings from and extensive literature search on the Hypericum species around the globe that have been assessed for antimicrobial and antiviral activity. An attempt has been made through this review to summarize the information in this aspect in order to highlight the promising species of this genus which are worthy for further investigation as leads for drug development. Over 31 different Hypericum species have been reported to possess such activities with their varied number of phytoconstituents. Sixteen different constituents of six different classes of phytoconstituents have been reported to be present in different varieties of Hypericum, which may be considered responsible for this activity.

• Mycobiology
• /
• v.35 no.2
• /
• pp.54-61
• /
• 2007

Two isolates of Tricholoma matsutake T-008 and T-034, preserved in Entomopathogenic Fungal Culture Collection (EFCC) of Korea, were used in the present study. The isolates had 100% Bootstrap homology with Tricholoma matsutake U62964 and T. matsutake AB188557 and AF309538 preserved in Gene Bank of NCBI. Mycelial growth of T. matsutake was highest in TMM and MYA at $25^{\circ}C$. The highest dry wt. of mycelium was obtained after 65 days of culture, when 6 mycelial discs were inoculated in 100 ml of broth in 250 ml shaking flask. Mycelial mats were observed in clumped condition at the inoculation sites of pine forest after two weeks of inoculation. After 5 months of inoculation, mycelia mats were observed growing inside soil and walls of a few inoculation sites, while mycelial mats growth up to $5{\sim}8$ cm were observed in the roots of pine tree after 6 months. The survival rate of the inoculum was about 40% of the total inoculation sites. The survival rate was found below 20% when the mycelium was inoculated in the summer. The reasons for low survival rates of the mycelium were mainly due to dry season and the soil-borne small animals such as earthworm and mole. After one year of inoculation, no external difference was observed between the artificially inoculated mycelia and the naturally existing mycelia of T. matsutake. The present study showed that fruiting bodies of T. matsutake could be produced by artificial inoculation under the appropriate environmental conditions.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2230-2237
• /
• 2020

Self-priming venturi scrubber is one of the most effective devices used to collect aerosols and soluble gas pollutants from gaseous stream during severe accident in a nuclear power plant. The present study focuses on investigation of dust particle removal efficiency of the venturi scrubber both experimentally and theoretically. Venturi scrubber captures the dust particles in tiny water droplets flowing into it. Inertial impaction is the main mechanism of particles collection in venturi scrubber. The water injected into venturi throat is in the form of jets through multiple holes present at venturi throat. In this study, aerosols removal efficiency of self-priming venturi scrubber was experimentally measured for different operating conditions. Alumina (Al₂O₃) particles with 0.4-㎛ diameter and 3950 kg/㎥ density were treated as aerosols. Removal efficiency was calculated for different gas flow rates i.e. 3-6 ㎥/h and liquid flow rates i.e. 0.009-0.025 ㎥/h. Experimental results depict that aerosols removal efficiency increases with the increase in throat velocity and liquid head. While at lower air flow rate of 3 ㎥/h, removal efficiency decreases with the increase in liquid head. A theoretical model of venturi scrubber was also employed and experimental results were compared with mathematical model. Experimental results are found to be in good agreement with theoretical results.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.1
• /
• pp.91-109
• /
• 2013

The main objective of this research was to understand the latest trends of natural print design through the quantitative & qualitative analysis of fashion appeared in contemporary female collections. The research criteria was defined as 3 seasons from 2011 S/S to 2012 S/S. Data collection of 726 was done through review of 'pr$\hat{e}$t-$\grave{a}$-porter Collections' of three major fashion cities; Paris, Milan and NY. Statistical analysis of frequency with chi-square test was conducted. Also qualitative interpretation of natural print design' characteristics was completed. The main findings were as follows.; The average occurrence rate of natural print design from 2011SS to 2012 SS in three collections were 6.4% in Milan 6.4%, 5.5% in Paris and 6.8% in N.Y. The five source types of natural prints in contemporary women's fashion collections were identified and the order of their appearance were as follows: flowers, plants, animals, insects & marine organisms and compound one. The plant prints were expressed by stylized or realistic touch. Flower patterns showed more variables than plants, however, there were no big difference in their image and major characteristics. The animal prints demonstrated two aspects. First one used typical animal print of fur or skin, but the other one draw the animal figure like paintings. The compound source type presented the most interesting and fresh pattern design ideas. In the insects & marine organisms, mainly butterfly and seashell & starfish, etc. appeared as real shapes or sometimes were stylized.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.250-257
• /
• 2008

Knowledge of genetic diversity and of the genetic relationships among elite breeding materials has had a significant impact on the improvement of crops. In maize, this information is particularly useful in i) planning crosses for hybrid and line development, ii) in assigning lines to heterotic groups and iii) in plant variety protection. We have used the SSR technique to study the genetic diversity and genetic relationships among 76 Korean waxy corn accessions, representing a diverse collection from throughout Korea. Assessment of genetic diversity among members of this group was conducted using 30 microsatellite markers. Among these 30 microsatellite markers, we identified a total of 127 alleles (with an average of 4.2 and a range of between 2 and 9 alleles per locus). Gene diversity at these 30 microsatellite loci varied from 0.125 to 0.795 with an average of 0.507. The cluster tree generated with the described microsatellite markers recognized two major groups with 36.5% genetic similarity. Group I includes 63 inbred lines, with similarity coefficients of between 0.365 and 0.99. Group II includes 13 inbred lines, with similarity coefficients of between 0.45 and 0.85. The present study indicates that the 30 microsatellite loci chosen for this analysis are effective molecular markers for the assessment of genetic diversity and genetic relationships between Korean waxy corn accessions. Specifically, this study's assessment of genetic diversity and relationships between a set of 76 Korean waxy corn inbred lines will be helpful for such activities as planning crosses for hybrid and line development and association mapping analyses of maize breeding programs in Korea.

• Mycobiology
• /
• v.49 no.5
• /
• pp.461-468
• /
• 2021

The genus Laccaria (Hydnangiaceae, Agaricales) plays an important role in forest ecosystems as an ectomycorrhizal fungus, contributing to nutrient cycles through symbiosis with many types of trees. Though understanding Laccaria diversity and distribution patterns, as well as its association with host plants, is fundamental to constructing a balanced plant diversity and conducting effective forest management, previous studies have not been effective in accurately investigating, as they relied heavily on specimen collection alone. To investigate the true diversity and distribution pattern of Laccaria species and determine their host types, we used four different approaches: specimen-based analysis, open database search (ODS), NGS analysis, and species-specific PCR (SSP). As a result, 14 Laccaria species have been confirmed in Korea. Results regarding the species distribution pattern were different between specimen-based analysis and SSP. However, when both were integrated, the exact distribution pattern of each Laccaria species was determined. In addition, the SSP revealed that many Laccaria species have a wide range of host types. This study shows that using these four different approaches is useful in determining the diversity, distribution, and host of ECM fungi. Furthermore, results obtained for Laccaria will serve as a baseline to help understand the role of ECM fungi in forest management in response to climate change.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.3
• /
• pp.448-456
• /
• 2019

From the 1890s to the 1900s, Modern Japan investigated the sea of Korea (Joseon Dynasty) several times. The records of investigation result were "Fishery Circumstances of Korean Sea"(1893), "Official Trip Report on Wonsan Area of Korea"(1895), "Nautical Publication of Korea"(1894), "Patrol Reports of Korea Fishery Association"(1898~1900), "Fishery Guide for Korean Sea"(1903) and "Chronicles of Korea Fisheries"(1908~1911). Although these surveys were conducted more than 100 years ago, they provide a glimpse into the fishing situation of Korea as well as the lives of residents in the coastal areas. In particular, Chronicles of Korean Fisheries is a vast collection of four volumes, and it has much to do with the history and culture of Korea, including marine products from the coastal waters, the population of coastal villages, the number of people engaged in fishing, and the number of fishing boats and nets. From the perspective of the development of fisheries studies, the modern classification of marine products after Linne has already been applied, and the classification of those days is quite different from that of the present classification, so it can be said to be an interesting data from the viewpoint of animal and plant taxonomy.