• 제목/요약/키워드: Plant Test

검색결과 3,805건 처리시간 0.032초

자철광 및 철분말을 혼입한 고열전도 콘크리트의 열전도 평가 및 해석기법 비교에 대한 연구 (Study on Analysis Technique Comparison and Evaluation of High Thermal Conductivity Concrete with Magnetite Aggregates and Steel Powder)

  • 이학수;김민규;권성준
    • 콘크리트학회논문집
    • /
    • 제26권3호
    • /
    • pp.315-321
    • /
    • 2014
  • 콘크리트는 경제적이면서 내구적인 건설재료로서 고단열성능을 가지고 있으므로 RC 구조물 뿐 아니라 내외장재에 많이 사용되고 있다. 또한 우수한 방사선 차폐 성능을 가지고 있으므로 원전구조물 및 플랜트 구조에 사용되고 있다. 그러나 이러한 고단열 성능으로 인해 내부에 원전구조물 내부에 화재나 멜트다운(melt-down)과 같은 문제가 발생하면 외부에서 인공적으로 온도를 낮출 방법이 매우 제한적이다. 이 연구는 자철광 골재와 철분말을 이용하여 고열전도 콘크리트를 제조하고 이에 대한 역학적 성능과 열전도 특성을 평가하였다. 자철광 골재를 체적비 최대 42.9%, 철분말을 1.5% 혼입하여 열전도 특성을 분석하였다. 자철광골재의 체적비가 30% 수준까지는 큰 열전도가 평가되지 않았으나, 이후 선형적으로 증가하여 체적비 42%가 되었을 때, 열전도는 2.5배 수준으로 증가하였다. 또한 철분말을 포함한 경우는 포함하지 않은 경우에 비해 열전도가 106~113% 증가하였다. 기존의 열전도 모델(ACI, DEMM, MEM)의 결과들이 실험 결과와 비교되었으며, 이러한 모델들은 자철광 및 철분말이 함유된 고열전도 콘크리트에 대해서도 합리적으로 적용될 수 있음을 검증하였다.

준설 실트질 점토를 이용한 경량기포혼합토의 압축강도 특성 (Compressive Strength Characteristics of Light-weight Air Foamed Soil Using Dredged Silty Soils)

  • 김동규;윤여원;윤길림
    • 한국지반환경공학회 논문집
    • /
    • 제18권5호
    • /
    • pp.27-33
    • /
    • 2017
  • 본 연구에서는 실트질 점토와 동물성 기포제 및 시멘트로 제작한 경량기포혼합토의 공학적 특성을 고찰하는 시험을 수행하였다. 현장의 경량기포혼합토는 도로를 위한 연약지반상 성토 및 기존도로의 확장 구간에 성토재료로 사용되어 왔다. 현장에서는 주로 제작 직후의 단위중량과 흐름치를 측정하여 품질관리를 하고 있으며, 실내 시험을 통해 압축강도시험으로 확인한다. 본 연구의 주목적은 경량혼합토의 다른 특성과 흐름치 관계와 더불어 흐름치로부터 시방서에서 요구하는 압축강도를 예측하고자 하는 것이 주요 목적이다. 연구 결과, 준설토의 함수비가 클수록 높은 유동성으로 인해 흐름치가 증가하였고 재료분리로 인해 타설 깊이에 따른 단위중량이 증가하였다. 60cm의 시료 하부는 상부에 비하여 약 2배의 압축강도를 나타내었다. 현장에서의 품질관리는 주로 흐름치에 의존하게 되므로 흐름치와 혼합토의 압축강도를 선행적으로 예측할 수 있도록 Yoon & Kim(2004)이 제시한 정규화계수와의 상관관계를 제시함으로써 흐름치로부터 압축강도를 예측할 수 있도록 하였다. 또한, 흐름치와 정규화계수와의 관계를 제시하였으며 이관계로부터 정규화계수를 산정하고, 이로부터 계산한 압축강도와 실내시험 압축강도를 비교한 결과, 준설토의 초기함수비가 높을수록 유사한 관계가 나타났다. 따라서, 흐름치와 정규화계수의 상관관계를 통해 압축강도를 사전에 예측하여 설계 단계에서 반영할 필요성이 있다고 판단된다.

알칼리 자극제로서 미분시멘트와 순환골재가 고로슬래그 다량치환 콘크리트의 공학적 특성 및 미세구조에 미치는 영향 (Effect of Fine Particle Cement and Recycled Aggregates as Alkali Activator on the Engineering Properties and Micro-Structure of High Volume Blast Furnace Slag Concrete)

  • 한민철;이향재;한천구
    • 한국건축시공학회지
    • /
    • 제13권6호
    • /
    • pp.602-608
    • /
    • 2013
  • 본 연구에서는 BS다량 치환 콘크리트의 알칼리자극제로서 순환골재 및 고분말도의 FC를 복합 사용한 콘크리트의 제반 공학적 특성 및 미시적 분석을 실시하였다. FC 치환에 따른 슬럼프 및 공기량은 큰 차이가 없었으며, 응결시간은 FC 치환에 따라 비례적으로 단축되는 것으로 나타났다. FC 치환에 따른 압축강도는 고분말도의 FC가 치환됨에 따라 촉진된 수화반응 및 순환골재의 미수화 시멘트의 알칼리 용출로 인해 BS의 잠재수경성 반응을 촉진시켜 초기 및 28일 재령에서의 Plain 대비 강도저하를 상당부분 회복할 수 있었으며, 특히 향후 재령이 경과함에 따라 포졸란 반응의 활성화로 추가적인 강도향상이 기대된다. 탄산화 저항성의 경우 큰 차이가 없으며, 세공분포의 경우 FC 치환률이 증가함에 따라 $0.1{\mu}m$이하의 미세 공극분포가 급격히 증가하는 경향을 보였고, SEM 측정결과 FC 치환에 따른 7일 및 28일에서의 C-S-H 및 $Ca(OH)_2$의 생성을 확인하여 FC가 BS 다량치환 순환골재 콘크리트의 알칼리 자극에 기여함을 확인 할 수 있었다.

몇 가지 꿀벌 노제마병 방제물질의 평가와 꿀벌 질병의 발생시기 조사 (Calendar for the Prevalence of Honey Bee Diseases, with Studying the Role of Some Materials to Control Nosema)

  • 호산 에프 아보-샤라
    • 한국응용곤충학회지
    • /
    • 제57권2호
    • /
    • pp.87-95
    • /
    • 2018
  • 미포장충류(Nosema spp. (NS))는 양봉꿀벌에 심각한 문제를 야기시키는 기생충으로 효과적인 방제물질의 선발이 무엇보다 중요하다. 본 연구는 노제마병과 기타 꿀벌의 발생유행시기의 구명과 더불어 3가지 노제마병 방제물질(M1 = 벌꿀희석의 레몬쥬스; M2 = 설탕시럽 혼합의 카모마일 추출물; M3 = 설탕시럽 혼합의 항생물질 스트리베트)을 평가하고자 수행하였다. 꿀벌 성충과 유충집단의 질병 유행시기를 년간 조사하였으며, 야외 및 실험실 조건에서 노제마병에 대한 M1, M2, M3의 효과를 평가하였다. 조사결과 극소수의 꿀벌 성충과 유충 질병이 발견되었다. 노제마병은 겨울과 봄 기간 저온과 고습조건에서 검출되었다. 포장실험에서 M2는 36.66%까지 발병억제 능력을 보였으며, 반면M3는 23.33%, M1는 13.33%의 억제효과를 보였다. 실내실험에서 M2가 방제효과가 가장 좋았고, 그 다음 M1와 M3 이었다. 3가지 방제물질은 병에 감염된 꿀벌성충의 생존력을 크게 높이는 것으로 나타났다. 본 연구는 노제마병 방제를 위한 천연물질로 카모마일의 잠재적 방제효과를 제시하고 있다.

컨테이너에서 재배된 백목련과 자귀나무의 이식전후 생장률 평가 (An Evaluation on the Growth Rates of Magnolia denudata and Albizzia julibrissin Produced in Containers)

  • 김태진;김학범
    • 한국조경학회지
    • /
    • 제29권5호
    • /
    • pp.92-100
    • /
    • 2001
  • This study was conducted to evaluate the growth rate of landscape trees produced in containers for three year, and the growth rate of the establishment period during sixth month~twelve months after transplanting. Two types of container such as plastic pot(pot) and fabric growing bag(bag) were adopted to restrict tree roots. Each type of container was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plant species (Magnolia denudata, Albizzia julibrissin) were planted in the seven sub-types of container. After one or two growing season in the container, the trees of each container type were transplanted. Half of the trees were transplanted in the mild spring season, and the other half were transplanted in the improper summer season. The data was collected on the diameter of root cellar and the tree height in each year. The research results are as follows; 1. Container production method was lower than the traditional production methods by 1.3 times ~ 2 times in the growth rates. 2. The Geocell bag and Root control bag revealed higher growth rates than pp-woven bag. And pot- in-pot(double pot)system revealed higher growth rates than the ether container pot system in A denudata. There were no differences in the growth rates between container production system in Albizzia julibrissin. 3, The growth rates of improper transplanting trees was high in the \"pot\" type - \"bag\" type - \"control\" in descending order. Especially, the growth rates of \"pot\" type revealed higher than \"control\" by 4 times. 4. From the results of ANOVA and Ad hoc test, the variable of growth factors of each container types in improper transplanting experiment was not significant for a range of 5% or 1% level. And the growth rates of traditional production method was lower than the container production method. 5. There was no differences in growth rate between the containerized and the traditional production system in the case of proper transplanting experiment. The growth rates of diameter of root collar was higher in the \"control\". The growth rates of tree height was higher in the \"bag\" type. Finally, based upon the results of this study, subsequent research on the development of container materials and maintaining methods that focused on the growth rates would be required.aintaining methods that focused on the growth rates would be required.

  • PDF

와이어로프로 횡보강된 고중량콘크리트 전단벽의 연성평가 (Ductility Evaluation of Heavyweight Concrete Shear Walls with Wire Ropes as a Lateral Reinforcement)

  • 문주현;양근혁
    • 콘크리트학회논문집
    • /
    • 제27권3호
    • /
    • pp.207-214
    • /
    • 2015
  • 이 연구에서는 중량콘크리트 전단벽의 경계요소내에서 횡보강근으로서 와이어로프의 적용가능성을 평가하였다. 와이어로프의 횡보강근의 배근간격은 60 mm에서 120 mm로 변화되었는데, 이때의 횡보강근체적지수는 0.126~0.234이다. 와이어로프는 주철근의 외부와 경계요소내 내부의 크로스타이로 적용되었다. 와이어로프로 횡보강된 5개의 중량콘크리트 전단벽은 축력하중하에서 반복횡하중의 실험이 수행되었다. 실험결과, 횡보강근체적지수가 증가함에 따라 전단벽의 연성은 현저하게 증가한 반면, 휨 내력의 변화는 미미하였다. 전단벽의 휨 내력의 실험결과는 ACI 318-11 기준의 예측값 보다 다소 높았다. 동일한 횡보강근체적지수에서 와이어로프로 횡보강된 전단벽의 변위연성비는 일반철근으로 보강된 전단벽보다 높았다. 특히, 이 실험결과로부터 고연성설계를 위한 곡률연성비 16 이상을 확보하기 위해서는 횡보강근체적지수가 0.233 이상이 요구되었다.

남포잎벌의 생태(生太)와 방제(防除)에 관(關)한 연구(硏究) (Ecology and Chemical Control of Caliroa carinata (Hymenoptera : Tenthredinidae))

  • 김철수;박지두;박영석;이상길;신상철
    • 한국산림과학회지
    • /
    • 제89권5호
    • /
    • pp.685-690
    • /
    • 2000
  • 1996년부터 경상북도 상주시 소재의 신갈나무림에 남포잎벌(Caliroa carinata Zombori)이 대발생하여 많은 피해를 주고 있으나 우리 나라에서는 본 해충에 대해 행해진 연구가 전무한 실정이다. 이에 그 생태를 조사하고 방제를 위한 약제시험을 실시하였다. 성충의 우화시기는 6월 8일부터 7월 5일로 약 1개월간 지속되었고 그 우화최성기는 6월 18일이었다. 암컷 성충은 잎 표면에 산란관을 꽂고 잎 뒷면의 엽맥에 일열로 산란하며, 산란수는 평균 11개였다. 유충은 6령까지 발육하며 발육기간은 $20^{\circ}C$에서 약 19일, $25^{\circ}C$에서 약 17일이었고 영기별로는 2-4일의 발육기간을 보였다. 본 종의 참나무류에 대한 기주 선호성을 조사한 바, 신갈나무와 떡갈나무를 가장 선호하였고, 밤나무 선호성이 낮았으며, 굴참나무는 전혀 섭식하지 않았다. 또한 유충기에 테부페노자이드 액상수화제, 플루페녹수론 분산성액제, 에토펜프록스 유제, 페니트로치온 유제 등을 피해잎에 살포하고 처리 3일 후의 살충율을 조사한 결과 공시약종 공히 95% 이상의 높은 살충율을 보였다. 본 해충의 약제방제적기는 6월하순-7월상순으로 사료되었다.

  • PDF

실외 실험적 온난화 및 강수 처리에 따른 소나무와 낙엽송 유묘의 초기 생장 특성 (The Early Growth Performances of Pinus densiflora and Larix kaempferi Seedlings Under Open-field Experimental Warming and Precipitation Manipulation)

  • 권보람;조민석;양아람;장한나;안지애;손요환
    • 한국산림과학회지
    • /
    • 제109권1호
    • /
    • pp.31-40
    • /
    • 2020
  • 본 연구는 기후변화와 관련하여 양묘과정에서 온도와 강수 변화에 따른 주요 침엽수의 생존 및 생장 특성 변화를 알아보고자 수행하였다. 소나무와 낙엽송 노지묘(1-0)를 대상으로 대조구 기준 3℃의 온도를 상승시키거나 ±40%의 강수를 조절한 6처리 생육환경[온도 2처리(대조: TC, 증가: TW) × 강수 3처리(대조: PC, 감소: PD, 증가: PI)] 실외 실험구를 조성하였으며, 생존율, 근원경, 묘고, 물질생산량 및 묘목품질지수 변화를 조사하여 이원분산분석을 수행하였다. 소나무는 온도와 강수 처리에 따른 생존율 차이가 없었지만, 강수가 증가할수록 묘목품질지수가 낮아지는 경향을 보였다. 낙엽송은 온도 상승과 강수 감소에 따라 고사율이 증가하였으며, 묘목품질지수는 두 요인 간 상호작용을 보이면서 온도대조-강수증가 처리구에서 가장 낮게 나타났다. 따라서 양묘과정에서 소나무는 강수 증가, 낙엽송은 온도 증가 또는 강수 감소에서 낮은 묘목 생산량과 품질이 예상되며, 기후변화에 따른 두 수종의 특이적 민감도를 확인할 수 있었다. 향후 지구온난화와 가뭄·폭우 등의 강수 변화에 의해 수종별 묘목 생존과 품질의 변화가 예상되기 때문에 각 수종의 생육 반응 특성에 따른 적합한 양묘시업 대응 전략이 필요할 것으로 판단된다.

복잡한 CAD 형상의 매개변수화를 통한 3차원 경계면 레벨-셋 알고리즘 개발 및 적용 (A Level-set Parameterization for Any 3D Complex Interface Related to a Fire Spread in Building Structures)

  • 김현준;조수영;이영헌;여재익
    • 한국항공우주학회지
    • /
    • 제48권2호
    • /
    • pp.135-146
    • /
    • 2020
  • 경계면을 정의하는 기존의 레벨-셋 기법은 대개 수학적인 수식을 이용한다. 그러나 3차원 데카르트 좌표계에서 복잡한 경계면을 수식으로 설정하는 방식은 거의 불가능하다. 이러한 이유로 우리는 보편적으로 사용되는 스테레오리쏘그래피(STL) 형식을 매개 변수화하여 3D 캐드 형상의 내부와 외부를 구분하는 레벨-셋 경계면 설정 알고리즘을 개발하였다. 본 논문은 반응막대 실험 모사를 통해 기존의 경계면 설정 방식과 새로운 경계면 설정 방식 결과와 비교하여 이 알고리즘이 적용된 하이드로 다이내믹 솔버의 타당성을 확보하였다. 이를 통해 가연성 기체로 채워진 다양한 형상 안에서 충격파와 상호작용이 연소 폭발 천이 현상에 미치는 영향을 수치적으로 해석하였다. 또한, 실제 크기의 공장 설비에서 화염이 퍼져나가는 과정과 데토네이션 발생이 설비에 미치는 피해를 수치적으로 예측하는 시뮬레이션을 진행하였다.

의복문양(衣服紋樣)의 기호도에 관한 실태(實態) 연구(硏究) - 한복(韓服)을 중심(中心)으로 - (A Study on Present Status of Preferences in the Choice of Patterns in Clothing)

  • 김은주
    • 복식
    • /
    • 제6권
    • /
    • pp.65-87
    • /
    • 1982
  • 1. Purpose: The purpose is to apply and adapt ancient textile pattern to practical life, and to contribute to the promotion of the creative development of modernization and Koreanization of textile pattern by the survey of the extent of taste for the textile pattern existent in Korean costume among costumes. 2. Hypothesis: Textile pattern is in most classical one expressed in fact, but nowadays abstract or geometric one is more exist. Consumers are in most part in forties, and so the taste cannot be ignored. Therefore aesthetic consciousness found Korean costume is more important rather than excessively bold or mordern one. 3. Method and Process: (1) This research is analysed 386 one through college student and parents of a primary or high school. (2) Taste of the pattern is comparisoned and analyzed as age. education, pocket money of the student or an income of a month in home through computer. And the analysis of the statistics research is operation through the Chi-Square Goodness of-Fit-Test. 4. Conclusion: (1) The Korean costume put on mostly party or formal dress, therefore it should be researched as an outdoor dress with traditional costume. (2) The most one is concerned in textile pattern, it's taste is different from color, constitution. Textile industry is developed not only weave pattern, gold-coverning pattern but embroidry pattern, dye pattern, therefore the various side of pattern design should be researched. (3) In Side of form, plant pattern is not only most various but highest in popularity. According to approach nowadays, all of the pattern becomes composition or geometric one with abstract tendency and so from these day pattern is necessary combinationed, researched with our people emotion. (4) The color of textile pattern is choiced individual taste. Through investige, research in various side of the modern taste and our costume, we take growing interest in the color, composition of textile, and should dressed with beauty and grace. (5) In side of size, textile pattern is choiced to individual face and body shape through research on form, color, size of these pattern, we should endeavor to dress well. (6) In side of application, most people is concerned in not only interior ornament but the costume is high. Costume research by some people of the outside and symbol with interior through the pattern analysis is not only very important but also is due to people culture.

  • PDF