• The Plant Pathology Journal
• /
• v.19 no.1
• /
• pp.9-12
• /
• 2003

• New & Renewable Energy
• /
• v.5 no.3
• /
• pp.32-39
• /
• 2009

The Samcheonpo ocean small hydropower plant (SHP) has a special feature of using marginal hydraulic head of circulating water system of fossil fuel power plant as a power source and having the characteristics of general hydropower generation and tidal power generation as well. Also, it contributes to reducing green house gases and developing clean energy source by recycling circulating water energy otherwise dissipated into the ocean. The efficiency of small hydropower plant is directly affected by effective head and flow rate of discharged water. Therefore, the efficiency characteristics of ocean hydropower plant are analyzed with the variation of water level and flow rate of discharged water, which is based on the accumulated operation data of the Samcheonpo hydropower plant. After the start of small hydropower plant operation, definite rise of water level was observed. As a result of flow pattern change from free flow to submerged flow, the instability of water surface in overall open channel is increased but it doesn't reach the extent of overflowing channel or having an effect on circulation system. Performance evaluation result shows that the generating power and efficiency of small hydropower exceeds design requirements in all conditions. Analysis results of CWP's water flow rate verify that the amount of flowing water is measured less and the highest efficiency of small hydropower plant is achieved when the effective head has its maximum value. In conclusion, efficiency curve derived from water flow rate considering tidal level shows the best fitting result with design criteria curve and it is verified that overall efficiency of hydropower system is satisfactory.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In 2016, an earthquake occurred at Gyeongju, Korea. At the Wolsong site, the observed peak ground acceleration was lower than the operating basis earthquake (OBE) level of Wolsong nuclear power plant. However, the measured spectral acceleration value exceeded the spectral acceleration of the operating-basis earthquake (OBE) level in some sections of the response spectrum, resulting in a manual shutdown of the nuclear power plant. Analysis of the response spectra shape of the Gyeongju earthquake motion showed that the high-frequency components are stronger than the response spectra shape used in nuclear power plant design. Therefore, the seismic performance evaluation of structures and equipment of nuclear power plants should be made to reflect the characteristics of site-specific earthquakes. In general, the floor response spectrum shape at the installation site or the generalized response spectrum shape is used for the seismic performance evaluation of structures and equipment. In this study, a generalized response spectrum shape is proposed for seismic performance evaluation of structures and equipment for nuclear power plants. The proposed response spectrum shape reflects the characteristics of earthquake motion in Korea through earthquake hazard analysis, and it can be applied to structures and equipment at various locations.

• Food Science of Animal Resources
• /
• v.34 no.1
• /
• pp.73-79
• /
• 2014

This study was performed to evaluate the quality characteristics of three deboned categories of chicken thigh meat: one which was slaughtered and deboned in the same plant (fresh); one which was slaughtered, deboned, frozen, and thawed in the same plant (frozen-thawed); and the last which was slaughtered in a plant, deboned in a different plant, but then transferred to the original plant (fresh-outside). Surface color, drip loss, 2-thiobarbituric acid reactive substances (TBARS) value, sensory evaluation, and total aerobic bacterial counts of the chicken samples were determined. Moreover, the torrymeter was used to measure the differences in freshness of the chicken meat. The surface color and the TBARS values did not show significant differences among the three categories. However, the total aerobic bacterial counts of fresh-outside and frozen-thawed chicken meat were significantly higher than the fresh chicken meat on the first storage day, and the drip loss of frozen-thawed chicken meat was significantly higher than the fresh-outside and fresh chicken meat. In addition, the sensory evaluation of frozen-thawed chicken meat was significantly lower than the fresh-outside and fresh chicken meat. Torrymeter values were higher in fresh chicken meat than fresh-outside and frozen-thawed chicken meat during the storage period. These results indicate that the quality of frozen-thawed chicken meat is comparatively lower than the fresh chicken meat, and the torrymeter values can accurately differentiate the fresh-outside and frozen-thawed chicken meat from the fresh ones.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.3
• /
• pp.123-128
• /
• 2020

Analysis of the 2016 Gyeongju earthquake and the 2017 Pohang earthquake showed the characteristics of a typical high-frequency earthquake with many high-frequency components, short time strong motion duration, and large peak ground acceleration relative to the magnitude of the earthquake. Domestic nuclear power plants were designed and evaluated based on NRC's Regulatory Guide 1.60 design response spectrum, which had a great deal of energy in the low-frequency range. Therefore, nuclear power plants should carry out seismic verification and seismic performance evaluation of systems, structures, and components by reflecting the domestic characteristics of earthquakes. In this study, high-frequency amplification factors that can be used for seismic verification and seismic performance evaluation of nuclear power plant systems, structures, and equipment were analyzed. In order to analyze the high-frequency amplification factor, five sets of seismic time history were generated, which were matched with the uniform hazard response spectrum to reflect the characteristics of domestic earthquake motion. The nuclear power plant was subjected to seismic analysis for the construction of the Korean standard nuclear power plant, OPR1000, which is a reactor building, an auxiliary building assembly, a component cooling water heat exchanger building, and an essential service water building. Based on the results of the seismic analysis, a high-frequency amplification factor was derived upon the calculation of the floor response spectrum of the important locations of nuclear power plants. The high-frequency amplification factor can be effectively used for the seismic verification and seismic performance evaluation of electric equipment which are sensitive to high-frequency earthquakes.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.122-122
• /
• 2023

• The Plant Pathology Journal
• /
• v.22 no.4
• /
• pp.353-359
• /
• 2006

Transgenic Nicotiana benthamiana plants harboring the coat protein(CP) gene of Zucchini green mottle mosaic virus(ZGMMV) were chosen as a model host for the environmental risk assessment of genetically modified plants with virus resistance. This study was focused on whether new virus type may arise during serial inoculation of one point CP mutant of ZGMMV on the transgenic plants. In vitro transcripts derived from the non-functional CP mutant were inoculated onto the virus-tolerant and -susceptible transgenic N. benthamiana plants. Any notable viral symptoms that could arise on the inoculated transgenic host plants were not detected, even though the inoculation experiment was repeated a total of ten times. This result suggests that potential risk associated with the CP-expressiing transgenic plants may not be significant. However, cautions must be taken as it does not guarantee environmental safety of these CP-mediated virus-resistant plants, considering the limited number of the transgenic plants tested in this study. Further study at a larger scale is needed to evaluate the environmental risk that might be associated with the CP-mediated virus resistant plant.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.333-335
• /
• 2014

As the user demand for power plants becomes various, design objective becomes complicated. To review the system feasibility, system objective and evaluation criteria need to be newly defined. In this study, engineering design procedure of the multi-purpose power plant, such as barge-mounted combined cycle power plant with $CO_2$ capture, was shown as a previous work for the feasibility review of the system alternatives. For the system design, heat and mass balance for each system configuration was firstly performed. Using the thermal analysis results, conceptual design of system alternatives was carried out. And then, preliminary design of the major equipment was done. The engineering calculation results of this study would be used as the evaluation data for system feasibility review.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.34
• /
• pp.83-89
• /
• 1995

We call as plant life cycle the process starting from plant plan, design to disuse by way of construction, operation, but the plant facility inside it comes to changes of cope with various inner factor like blazing phenomenon and outer factor according to economic state. On the presumption of these factors, the problem is brought about how plant should be managed, this study attempt to suggest the conservation management through economic evaluation in investment design and alternative, that is, methodology connecting that of economical efficiency evaluation based on LCC(Life Cycle Costing) thinking method and facility management with that of life prediction.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2845-2849
• /
• 2008

Long Term Asset Management(LTAM) means a plan developed by using LCM(Life Cycle Management) process for optimum life cycle management of significant plant assets at each plant across the fleet. As a part of development of LTAM Strategies on nuclear turbines, a method so as to determine the future failure rates for low pressure turbine facilities at a nuclear plant was studied and developed by using both plant specific and industry-wide performance data. INPO's EPIX data were analyzed and some failure rate evaluation values considering preventive maintenance practices were calculated by using EPRI's PM Basis software. As the result, failure rate functions applicable to a priori and a posteriori replacement of low pressure turbines at a nuclear plant were developed and utilized in an assessment of economics of LCM alternatives on the nuclear turbine facilities in the respects of 40-year and 60-year operation bases.