• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.821-826
• /
• 2016

The leak before break (LBB) concept is used in pipe line design for nuclear power plants. For application of the LBB concept, leak rates through cracks should be evaluated accurately. Usually leak late analyses are performed for through-thickness cracks with constant cross-sectional area. However, the cross-sectional area at the inner pipe surface of a crack can be different from that at the outer surface. In this paper, leak rate analyses are performed for the cracks with linearly-varying cross-sectional areas. The effect of varying the cross-sectional area on leak rates was examined. Leak rates were also evaluated for cracks in bi-material pipes. Finally, the effects of crack surface morphology parameters on leak rates were examined.

• Advances in Traditional Medicine
• /
• v.3 no.3
• /
• pp.111-122
• /
• 2003

Plants of the genus Hypericum (Family - Hypericaceae) are herbs, shrubs or small trees and are distributed chiefly in the temperate regions of the world. About 400 different species of Hypericum are available throughout the globe and 20 species occur in India, including a few cultivated in gardens. Almost all plants of the genus Hypericum are widely used in folk medicine. Several potent phytoconstituents from different Hypericum species have led to the isolation of antibacterial, antifungal and cytotoxic compounds. With the development of resistance and cross resistance with different microorganisms and the evolution of so many deadly diseases the screening and evaluation of the phytoconstituents so much so the development of varied phytoconstituents for the drug development for these deadly diseases is utmost essential in every aspects. The present review on the antimicrobial use of different Hypericum reports the findings from and extensive literature search on the Hypericum species around the globe that have been assessed for antimicrobial and antiviral activity. An attempt has been made through this review to summarize the information in this aspect in order to highlight the promising species of this genus which are worthy for further investigation as leads for drug development. Over 31 different Hypericum species have been reported to possess such activities with their varied number of phytoconstituents. Sixteen different constituents of six different classes of phytoconstituents have been reported to be present in different varieties of Hypericum, which may be considered responsible for this activity.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.137-144
• /
• 2009

In this study, quantitative and pattern recognition analyses for the quality evaluation of Herba Epimedii using HPLC was developed. For quantitative analysis, five major bioactive constituents, hyperin, epimedin A, epimedin B, epimedin C, and icariin were determined. Analysis was carried out on Capcell pak $C_{18}$ column ($250{\time}4.6$ mm, 5 ${\mu}m$) with a mobile phase of mixture of acetonitrile and 0.1% formic acid, using UV detection at 270 nm. The linear behavior was observed over the investigated concentration range (2-50 ${\mu}g/mL;\;r_2\;>$ 0.99) for all analytes. The intraand inter-day precisions were lower than 4.3% (as a relative standard deviation, RSD) and accuracies between 95.1% and 104.4%. The HPLC analytical method for pattern recognition analysis was validated by repeated analysis of one reference sample. The RSD of intra- and inter-day variation of relative retention time (RRT) and relative peak area (RPA) of the 12 selected common peaks were below 0.8% and 4.7%, respectively. The developed methods were applied to analysis of twenty Herba Epimedii extract samples. Contents of hyperin, epimedin A, epimedin B, epimedin C, and icariin were calculated to be 0$\sim$0.79, 0.69$\sim$1.91, 0.93$\sim$9.58, 0.65$\sim$3.05, and 2.43$\sim$11.8 mg/g dried plant. Principal component analysis (PCA) showed that most samples were clustered together with the reference samples but several apart from the main cluster in the PC score plot, indicating differences in overall chemical composition between two clusters. The present study suggests that quantitative determination of marker compounds combined with pattern-recognition method can provide a comprehensive approach for the quality assessment of herbal medicines.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.303-308
• /
• 2010

Surface color is the most important quality factor for the grade evaluation of cherry tomato. Color is one of the representative indicators for the maturity which is closely related to the internal quality of cherry tomato, such as firmness, sugar content, and acidity. This study was carried out to investigate the relationship between surface color and internal quality of cherry tomatoes harvested from both hydroponic and soil culture at different ripening stages. To calculate the color values of cherry tomatoes an automatic color imaging system was constructed. A specially designed image processing algorithm for the color measurement was developed. The color values of L*, a*, b* were calculated from the initial color values of RGB and then compared with the internal quality. Statistical analyses indicated that the internal quality was more highly correlated with the surface color than size of cherry tomatoes. Color image features were also investigated to detect external damage of cherry tomatoes. The value of (R value - R mean value)/R mean value was the most effective image feature for the detection of damaged areas on the surface of cherry tomatoes. The results of this study demonstrated the feasibility of color sorting process as an alternative of the conventional drum type size sorting system for cherry tomato industry.

• Nuclear Engineering and Technology
• /
• v.26 no.2
• /
• pp.168-178
• /
• 1994

Accident Management involves all measures to prevent core damage and retain the core within the reactor vessel, maintain containment integrity and minimize off-site releases. The accident management approach includes : (1) advanced evaluation of candidate strategies, (2) development of procedures to execute appropriate actions efficiently, and (3) identification and provision for materials, tools, and possible modifications to the plant system that may be needed for such execution. When assessing accident management strategies it effectiveness, adverse effect and its feasibility, including information needs and compatibility with existing procedures, must be considered. The objective of this paper is to introduce analytical tools of decision trees and influence diagrams to develop a framework for modeling and assessing severe accident management strategies. The characteristics associated with these took are presented. Based on decision trees and influence diagrams, the framework is applied to a simple example associated with a single decision.

• Korean Journal of Food Science and Technology
• /
• v.3 no.2
• /
• pp.101-104
• /
• 1971

The dye-binding method based on the reaction of acidic orange-G dye with basic groups of protein molecule was investigated to observe its applicability to the determination of protein, basic amino acid and lysine contents in brown rice of several high-protein rice lines. The protein content of rice samples ranged from 7.91 to 10.53% and from 8.93 to 11.96% in terms of wet and dry bases, respectively. The correlation between dye-binding absorbance and protein content in terms of both dry and wet bases was highly significant; their correlation coefficients being $-0.955^{**}\;and\;-0.975^{**}$, respectively. The correlation of dye-binding absorbance lysine and basic amino acids were highly significant and their correlation coefficients were similar. Dye-binding absorbance-lysine showed a lower correlation than dye-binding absorbance-protein but a higher correlation than protein-lysine.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.3
• /
• pp.265-276
• /
• 1997

This study was investigated the herbage productivity and nutrient contents of corn (Suweon 19 and Kwanganok) and sweet sorghum (Ramiki sorgo and Silage sorgo) at the stage of maturity (10-DBS, silking, milky and dough stages) to identify the utility value of sweet sorghum as a substituting crop for corn. The silage materials (dough stage) were chopped and were storaged for 90 days in polyethlene bag with O.lmm thickness. Chemical composition, nitrogen content and in vitm dry matter digestibility were evaluated. Also, daily intake and palatability were checked in the feeding trial with four male sheep in average weight about 57kg. Both fresh and dry matter yield of corn and sweet sorghum were increased as the maturity processed (P< 0.05), and sweet sorghum showed higher total yield potential than corn. Crude protein content of the cultivars was decreased as the maturity was processed (P< 0.05). Neutral detergent fiber (NDF) content of the cultivars, in general, showed highest at silking stage, followed by 10 days before silking (10-DBS), and milky and dough stages (Pi0.05) in order. Acid detergent fiber (ADF) content was increased as the maturity processed, and it showed the highest value at milk stage. However, the contents of ADF in sorghum plant was decreased during the late maturity. Crude protein content of the silage was not significantly different among cultivars used, while NDF content was highest in Ramiki sorgo, followed by Silage sorgo, Kwanganok and Suweon 19. In v i m DM digestibility of the silage was highest in Kwanganok, followed by Suweon 19, Silage sorgo and Ramiki sorgo. Total N content of the silage was highest in Ramiki sorgo, followed by Suweon 19, Silage sorgo and Kwanganok. DM intake of the silage was highest in Ramiki sorgo, followed by Suweon 19, Silage sorgo and Kwanganok and it was closely related to the palatability value.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.4
• /
• pp.35-43
• /
• 2013

Most of the nuclear power plants(NPPs) adopts pressure difference type flow meters such as venturi and orifice meters for the measurement of feedwater flow rates to calculate reactor thermal power. However, corrosion products in the feedwater deposits on the flow meter by fouling as operating time goes. These effects lead to severe errors in the flow indication and then determination of reactor thermal power. The averaging BDFT, which has developed by Yun et al., has a potentiality to minimize this problem thanks to its inherent measurement principle. Therefore, it is expected that the averaging BDFT can replace the venturi meter for the feedwater pipe of steam generator of NPPs. The present work compares the amplification factor, K, based on CFD calculation against the K obtained from experiments in order to confirm whether a commercial CFD code can be applicable to the evaluation of characteristic for the averaging BDFT. In addition to this, the simulations to take into account of fouling effect are also carried out by rough wall option. The results show that the averaging BDFT is a promising flow meter for the accurate measurement of flow rates in the fouling condition of the NPPs.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.51-57
• /
• 2018

The objective of the present study is to examine the feasibility on the development of high-insulation concrete using aerogels with hydrophilic surface treatment. To prevent the segregation and enhance the dispersibility of agerogels in the cement pastes, the substrate of aerogels was modified to be hydrophobic property using surfactant. The modified aerogels were added from 0% to 100% of the cement volume at the interval of 25% under the constant cement content. Some cement pastes showed segregation phenomenon and flocculation of aerogels during mixing phase. The addition of aerogels decreased the compressive strength of cement pastes but enhanced the thermal conductivity. The thermal conductivity of pastes with 100% aerogels was lower by 43% when compared with that measured in the conventional paste. To improve the compressive strength and insulation capacity of concrete containing aerogels, a reliable surface treatment method of aerogels needs to be further investigated.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.77-83
• /
• 2010

In this study, we tried to determine any detrimental effects on water quality when bottom ash obtained from a coal-fired power plant intended to be used as a fill material in construction sites. Physical-chemical properties of bottom ash were determined using proximate analysis, elemental analysis, XRD, and XRF. Classification of bottom ash as a waste material and soil contamination due to the use of bottom ash were performed by Korea waste standard leaching test and soil toxicity test, respectively. Results of leaching tests were compared to the regulations for water quality and groundwater quality and no harmful effects on water quality were found. Most of heavy metals in leachate were below detection limits but trace amount of $Cr^{6+}$ was found. However, concentration of $Cr^{6+}$ was below the regulation criteria. Column leaching tests indicated that concentrations of Pb and Zn were slightly higher than regulations but below regulations within 1 PVE, but concentrations of sulfate were 10 times higher than regulation and thus, the required time to reach regulation was almost 8 PVE.