• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.801-806
• /
• 2015

Journal bearings support rotors using fluid film between the rotor and the stator. Generally, journal bearings are used in large rotor systems such as turbines in a power plant, because even in high-speed and load conditions, journal bearing systems run in a stable condition. To enhance the reliability of journal-bearing systems, in this paper, we study health-diagnosis algorithms that are based on the supervised learning method. Specifically, this paper focused on defining the unit of features, while other previous papers have focused on defining various features of vibration signals. We evaluate the features of various lengths or units on the separable ability basis. From our results, we find that one cycle datum in the time-domain and 60 cycle datum in the frequency domain are the optimal datum units for real-time journal-bearing diagnosis systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.355-361
• /
• 2014

Steam explosions can be caused by fuel-coolant interactions resulting from failure of the external vessel cooling system in a new nuclear power plant. This can threaten the integrity of structures, including the nuclear reactor and the containment building. In the present study, an improved technique for analyzing the steam explosion phenomenon was proposed on the basis of previous research and was verified by simulations involving alumina experiments. Also, the improved analysis technique was applied to determine the pressure history of the reactor cavity in accordance with postulated failure locations. The results of the analysis revealed that the effects of vessel side failure are more serious than those of vessel bottom failure, with approximately 70% higher maximum pressure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.3
• /
• pp.225-232
• /
• 2017

Several maintenance issues related to cavitation erosion and fatigue cracks in the water turbine subcomponents of pumped-storage plants, such as a runner and a draft tube, have been reported in the past. Generally, the pumped-storage plants provide ancillary services, such as black-start and system stabilization. The ancillary services are responsible for cyclic low opening operation of the guide vanes. It has been empirically established that this low opening operation further damages the water turbine subcomponents. In this study, the acceleration effect of the low opening operation on the cavitation erosion and fatigue of the water turbine is quantitatively assessed through finite element flow analysis, finite element stress analysis, and fatigue analysis. As a result of the assessment, it is identified that the cavitation potential increases and the turbine efficiency decreases with a decrease in the opening of the guide vane. Also, the low opening operation has an insignificant effect on the fatigue even though it increases the maximum stress values at the runner blade roots.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.1
• /
• pp.11-22
• /
• 1997

It is very essential to get the accurate classification of defects in primary pressure vessel and piping welds for the safety of nuclear power plant. Ultrasonic testing has been widely applied to inspect primary pressure vessel and piping welds of nuclear power plants during PSI / ISI. Classification of flaws in weldments from their ultrasonic scattering signals is very important in quantitative nondestructive evaluation. This problem is ideally suited to a modern ultrasonic Pattern recognition technique. Here, a brief discussion on systematic approach to this methodology is presented including ultrasonic feature extraction, feature selection and classification. A stronger emphasis is placed on Fuzzy-UTSCS (UT signal classification system) as efficient classifiers for many practical classification problems. As an example Fuzzy-UTSCS is applied to classify flaws in ferrite pressure vessel weldments into two types such as linear and volumetric. It is shown that Fuzzy-UTSCS is able to exhibit higher performance than other classifiers in the defect classification.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.3
• /
• pp.153-156
• /
• 1987

With a purpose of evaluation rye crop as winter green feed, a cultivar was sown in autumn and harvested at booting, heading, milk, dough and yellow-ripe stages, and processed into silage. The quality of the silage was assessed in terms of ammonia-N, recovery rate in dry matter, pH, and the composition of organic acids. The results obtained are: 1. The recovery rate in dry matter from the silage was the highest when harvested at yellow stage (P<0.01). The ratio of ammonia-N to total-N was low when the rye crop was harvested during milk (9.4%) and dough ( 12.7%) stages (P$NH_3-N$. 3. Silage quality based on the composition of organic acids was highly evaluated when the crop was harvested during milk, and dough stages. 4. Considering both the DM yield and quality of the silage, it was found that rye crop should be harvested at dough stage and ensiled.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.1
• /
• pp.1-15
• /
• 1999

A survey was conducted in 591 college students using 8 different cafeterias serving 31 meals. The information was obtained about the name and amount of dishes they consumed from the menu offered by college foodservice. Mean nutrient contents per meal in offered menu were higher than 1/3 of RDA for their age, sex in offered menu. The mean energy content was 466kcal from rice, 113kcal from soup, 141kcal from side dish and 21kcal from kimchi. When side dishes were classified by cooking methods, side dishes using grilling, frying, roasting methods had high energy content and fat percent above 200kcal, 40% per dish. By main ingredients, side dishes with animal food were higher energy than with plant food. Students consumed 94% of the energy provided in offered menu. When compared to proportion of foods consumed by sex, there was 43% of female and 22% of male consumed less than half in soup and 31% of female and 12% of male in kimchi. The most prevalent menu patterns of subjects included rice, soup, 2 side dishes, kimchi and were the same in both sexes. Mean energy intakes per meal were 989kcal for males and 842kcal for females which were enough to meet 1/3 of RDA for their age and sex. Most nutrient intake except fat and vitamin B1 were higher in set menu than in cafeteria. Nutrient adequacy ratio(NAR) were above 0.9 except calcium and vitamin A. The mean energy intake was 542kcal from rice, 70kcal from soup, 164kcal from side dish and 20kcal from kimchi. In conclusion, intake of most of the nutrients of students obtained from males in college foodservice were sufficient but calcium intake was insufficient and fat content was above 20% of energy. High fat consumption was due to side dishes from frying, grilling, roasting with animal food. To provide desirable meals in college foodservice, use of fat in cooking must be decreased.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.334-343
• /
• 1996

Quality evaluation for food and agricultural products have always been one of the most elusive problems associated with the handling , processing and marketing in a food plant production. In order to detect physical foreign materials in food and agricultural products, non-destructive techniques have been developed for many years. Application of X-ray system to detect physical foreign materials in food and agricultural products could be considered to be a high potential method. Especially , it is impossible to detect internal physical foreign materials by visual inspections. In this study, it was tried to be applied for two different X-ray devices. Soft X-ray system with CdTe sensor and X-ray CT scanner were evaluated for advantage of the detection of non-meltallic foreign materials in food and agricultural products . Though the soft X-ray is not a high energy radiation, it is possible to detect small different density in a material. The CdTe sensor has a high resolution for t e soft X-ray energy region. The density characteristics of foods and foreign material were expressed region. The density characteristics of foods and foreign materials were expressed as a soft X-ray energy spectrum. The energy spectrum was analyzed by a personal computer with a multi-channel analyzer. X-ray CT scanner can provide visual image and analyze by three dimensional information inside food and agricultural products. The X-ray CT scanner using as a medical equipment was used to detect a foreign material. The density characteristics of food and foreign materials in food were tried to be detected by the threshold value on the basis of the CT numbers. The soft X-ray absorption characteristics for acrylin plates and distilled water were obtained and could be found the possibility of detecting a small physical foreign materials such as a plastic wrapping film , a stone and grasshopper in food and agricultural products.

• Korean Journal of Pharmacognosy
• /
• v.49 no.2
• /
• pp.155-164
• /
• 2018

Nypa fruticans Wurmb is a species of palm, which is widely distributed in the mangrove forest of Southeast Asia. Various parts of N. fruticans has been used as a traditional medicinal plant. However, the physiological activities of N. fruticans has not yet been clarified well. Therefore, in this study, the 50% ethanol extract and its aqueous and ethyl acetate fractions of young shoots of N. fruticans were investigated for their antioxidant, cytoprotective effect, and antimicrobial activities. Every sample possessed very high free radical and various ROS scavenging capacities assessed by employing different in vitro assays such as $DPPH^{\cdot}$, $O_2^{{\cdot}-}$, ${\cdot}OH$, and $^1O_2$ scavenging activities. Based on these results, the cytoprotective effect was investigated using the oxidative hemolysis of erythrocyte. We found that the extract and fractions provide a greater protective effect compared with (+)-${\alpha}$-tocopherol. Furthermore, antimicrobial activities were confirmed against skin pathogens by broth microdilution assay. The ethyl acetate fraction had much higher antimicrobial activities than methyl paraben against Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, and Candida albicans. Taken together, our results indicated that the young shoots of N. fruticans may have the potential role as a natural active ingredient through their antioxidant, cytoprotective effect, and antimicrobial activities.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.30-30
• /
• 2002

It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen(l0×10×0.5mm). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at 600℃. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.1
• /
• pp.18-22
• /
• 2014

Residual stresses that occur during the welding process, are the main cause of failure and defects in welded structures. This paper, presents the use of an electronic processing laser speckle interferometer to measure the residual stress of a welded pipe for a nuclear power plant. A tensile testing machine was used to evaluate a welded pipe that failed in compression. The inform plane deformation and modulus of elasticity of the base metal and welds were measured using an interferometer. Varying the load on the welded pipe had a larger effect on the deformation of the base metal the other properties of the base metal and welds. The elastic moduli of the base metal and weld of the welded pipe were 202.46 and 212.14 GPa, respectively, the residual stress was measured to be 6.29 MPa.