• Korean Institute of Interior Design Journal
• /
• v.15 no.5 s.58
• /
• pp.209-220
• /
• 2006

The goal to establish one multipurpose senior center in one district of Seoul city has been nearly completed. However, since it is behind the schedule by about 6 years, nearly all senior centers are saturated currently. Therefore, additional foundation plan of senior centers is in progress. Also, the main function of the center has changed from health and leisure to various welfare programs that the elderly living in a community need. In order to supplement these problems, many existing senior centers are using center to the most through addition and change of rooms. To establish the direction of spatial plan at establishing senior centers according to the regional characteristics, 20 cases of Seoul multipurpose senior centers in operation were site surveyed and the results of spatial features by types established and changed corresponding to each condition were suggested as follows: 1. The types were classified according to the shape of floor plan, sectional planning, entry traffic line, linkage with attached facilities and addition method etc. by the characteristics of the elderly in multipurpose senior centers, program operation, linkage of spatial composition by the function, positional relation between centers, management and operation method, and center complication method etc. and the respective features were suggested. 2. By analyzing the gross floor area and the area of each room of senior centers, the features of area by types and the features of area by each detailed center were suggested.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.1
• /
• pp.51-61
• /
• 2004

Mechanical parts are often grouped into part families based on the similarity of their shapes, to support efficient manufacturing process planning and design modification. The 2-part sequence papers present similarity assessment techniques to support part family classification for machined parts. These exploit the multiple feature decompositions obtained by the feature recognition method using convex decomposition. Convex decomposition provides a hierarchical volumetric representation of a part, organized in an outside-in hierarchy. It provides local accessibility directions, which supports abstract and qualitative similarity assessment. It is converted to a Form Feature Decomposition (FFD), which represents a part using form features intrinsic to the shape of the part. This supports abstract and qualitative similarity assessment using positive feature volumes.. FFD is converted to Negative Feature Decomposition (NFD), which represents a part as a base component and negative machining features. This supports a detailed, quantitative similarity assessment technique that measures the similarity between machined parts and associated machining processes implied by two parts' NFDs. Features of the NFD are organized into branch groups to capture the NFD hierarchy and feature interrelations. Branch groups of two parts' NFDs are matched to obtain pairs, and then features within each pair of branch groups are compared, exploiting feature type, size, machining direction, and other information relevant to machining processes. This paper, the second one of the two companion papers, describes the similarity assessment method using NFD.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.1
• /
• pp.44-50
• /
• 2004

Mechanical parts are often grouped into part families based on the similarity of their shapes, to support efficient manufacturing process planning and design modification. The 2-part sequence papers present similarity assessment techniques to support part family classification for machined parts. These exploit the multiple feature decompositions obtained by the feature recognition method using convex decomposition. Convex decomposition provides a hierarchical volumetric representation of a part, organized in an outside-in hierarchy. It provides local accessibility directions, which supports abstract and qualitative similarity assessment. It is converted to a Form Feature Decomposition (FFD), which represents a part using form features intrinsic to the shape of the part. This supports abstract and qualitative similarity assessment using positive feature volumes. FFD is converted to Negative Feature Decomposition (NFD), which represents a part as a base component and negative machining features. This supports a detailed, quantitative similarity assessment technique that measures the similarity between machined parts and associated machining processes implied by two parts' NFDs. Features of the NFD are organized into branch groups to capture the NFD hierarchy and feature interrelations. Branch groups of two parts' NFDs are matched to obtain pairs, and then features within each pair of branch groups are compared, exploiting feature type, size, machining direction, and other information relevant to machining processes. This paper, the first one of the two companion papers, describes the similarity assessment methods using convex decomposition and FFD.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.4
• /
• pp.45-55
• /
• 2018

The purpose of this study is to analyze common features and methodological differences of PN-spatial characteristics found in architectural theories and works of contemporary young architects in Japan, such as Sou Fujimoto, Yo shimada, Keisuke Maeda and Junya Ishigami. These architects have paid attention to space between nature and inner space and have tried to establish their own architectural theory on that. Such space is ambiguous and PN-spatial in a way that it has features of both nature and inner space. Ambiguousness is a characteristic of modern architecture and PN-spatial characteristics are one of the features of Japanese architecture. This study aims to analyze the architectural theories and works of contemporary young architects in Japan from the perspective of PN-space and to draw methodological differences and common features. Their theories and works have common features in terms of 'ambiguous spatial boundary', 'unregulated spatial territory', 'detoured circulation' and 'architectural motifs', but each has their own methodology. To sum up, the works and theories of the Japanese young architects contain the philosophy and discourse of modern architecture in general. To be sure, they clearly have characteristics of Japanese architecture, which needs to be studied constantly.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.814-819
• /
• 2005

There is growing consciousness of the environmental performance of buildings in Hong Kong. The Buildings Department, the Lands Department and the Planning Department of the Hong Kong Government issued the first of a series of joint practice notes [1] to promote the construction of green and innovative buildings. Green features are architectural features used to mitigate migration of noise and various air-borne pollutants and to moderate the transport of heat, air and transmission of daylight from outside to indoor environment in an advantageous way. This joint practice note sets out the incentives to encourage the industry in Hong Kong to incorporate the use of green features in building development. The use of green features in building design not only improves the environmental quality, but also reduces the consumption of non-renewable energy used in active control of indoor environment. Larger window openings in the walls of a building may provide better natural ventilation. However, it also increases the penetration of direct solar radiation into indoor environment. The use of wing wall, one of the green features, is an alternative to create effective natural ventilation. This paper therefore presents a preliminary numerical study of its ventilation performance using Computational Fluid Dynamics (CFD). The numerical results will be compared with the results of the wind tunnel experiments of Givoni.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.4
• /
• pp.244-253
• /
• 2001

For more complete process planning, machining sequence determination is critical to attain machining economics. Although many studies have been conducted in recent years, most of them suggests the non-unique machining sequences. When the tool approach directions(TAD) are considered fur a feature, both machining time and number of setups can be reduced. Then, the unique machining sequence can be extracted from alternate(non-unique) sequences by minimizing the idle time between operations within a sequence. This study develops an algorithm to generate the best machining sequence for composite prismatic features in a vertical milling operation. The algorithm contains five steps to produce an unique sequence: a precedence relation matrix(PRM) development, tool approach direction determination, machining time calculation, alternate machining sequence generation, and finally, best machining sequence generation with idle times. As a result, the study shows that the algorithm is effective for a given composite feature and can be applicable fur other prismatic parts.

• STI Policy Review
• /
• v.2 no.1
• /
• pp.1-12
• /
• 2011

Korea is examining how to coordinate its S&T policies and solidify its position as a leader of infrastructure innovation policy that forms the foundation for many different policies. A number of questions have been raised, such as whether to install a superior coordinating body like the National Science and Technology Council (NSTC) or separate the budget allocation and coordination authority from the budget-planning ministry. Korea has tried using various institutional coordination devices and functions such as reorganizing its administrative ministries based on related functions and installing or reinforcing a superior coordinating body. In line with these discussions, the strengthening of the S&T policy coordination function through the NSTC is currently under review. In order to design an effective S&T coordination system in step with changing political and social demands, it is important to have a clear recognition of the current context as well as the unique institutional characteristics of Korea. This study examines the evolution of Korea's S&T policy coordination systems and analyzes its features.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.170-179
• /
• 2016

In this paper we have tackled the outstanding inventory planning problems over new product launching period in a more holistic manner by addressing first the definition of efficient business rules to effectively control and reduce the inventory risks followed by the rigorous explanations on the implementation guide on suggested inventory planning rules. It is not unusual for many companies in the consumer electronics market to make a great effort to reduce the time to launch a new product because the ability to bring out higher performing products in such a short time period greatly increases the probability for them to remain competitive in the high tech market. Among so many newly developed products, those products with new features and technologies appeal to many potential customers while products which fail to win customers by design and prices rapidly disappear in the market. To adapt to this business environment, those companies have been trying to find the answer to minimize the inventory of old products so they can move to next generation products quickly with less obsolete material. In the experimental implementation of our rule-based inventory planning, Company 'S' reduced the inventory cost for the outgoing products as low as 49% of its peak level of its preceding product version in just 5 month after the adoption of rule-based inventory planning process and system. This paper concluded the subject with a suggestion that the best performance of rule-based inventory planning is guaranteed not from one-time campaign of process improvement along with system development but the decision maker's continuing support and attention even without seeing any upcoming business crisis.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.1
• /
• pp.21-28
• /
• 2011

The main purpose of this study is to analyze construction of space through the investigation of the cases of school community library through Gangneung-si's life-learning project and the findings from the analysis could be summarized as below. Firstly, most space used for school community library has the size of two classes in school on average and locals use generally space for reference and learning at school community library. Secondly, the construction of space of school community library is categorized into one for book-returning, references, reading, group learning and information, and an audio-visual space is also used for group learning and reading. A space for book-returning has features based on the location of its entrance and a space for reading features stand-up and sitting-on space considering size and usability. And a space for group learning has the feature of space planning that makes it possible for local people to get library programs and seminars and a space for information shows its feature of space planning that uses the wall.

• Journal of Environmental Science International
• /
• v.27 no.8
• /
• pp.711-721
• /
• 2018

In order to address housing issues, alleviate the concentration of urban populations, and resolve other issues regarding residential spaces, large residential complexes have been developed in Korea since the 1970s. The changes to the residential culture due to such development projects propagated rapidly, making the apartment complexes the most representative form of housing in Korea. In developing such large-scale complexes, plans for public open spaces, which play an important role in formulating the quality of residential environment, have been mostly the same, only utilizing the spaces remaining after planning other types of spaces. The current study looks at the case of Tama New Town development project, a Japanese new town development project that has a similar public open space system in large scale residential complex development projects in Korea. In doing so, the current study aims to identify the features of public open space plans. In the conclusion, the study first finds that various public open spaces must be reviewed and introduced in term of predicting social demands. Second, the study suggests the policy-makers should actively introduce pedestrian paths as a public open space. Third, the study deduces the planning implications of applying the principle of original landscape preservation.