• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.2
• /
• pp.130-145
• /
• 2004

This paper addresses the integrated problem of process planning and scheduling in FMS (Flexible Manufacturing System). The integration of process planning and scheduling is important for an efficient utilization of manufacturing resources. In this paper, a new method using an artificial intelligent search technique, called asymmetric multileveled symbiotic evolutionary algorithm, is presented to handle the two functions at the same time. Efficient genetic representations and operator schemes are considered. While designing the schemes, we take into account the features specific to each of process planning and scheduling problems. The performance of the proposed algorithm is compared with those of a traditional hierarchical approach and existing evolutionary algorithms. The experimental results show that the proposed algorithm outperforms the compared algorithms.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.1 no.1
• /
• pp.89-94
• /
• 1976

Many techniques have been applied to comprehensive regional planning through the processes of goal-building, research and analysis, plan-establishing, implementation-scheduling, and evaluation. Operations research(OR) is one of those techniques. OR has been developed in such fields of military operations, industrial engineering and business management during the last three decades in several developed western countries. It is a recent tendency for public administrators and researchers to be interested in OR for their scientific decision making. Therefore, we see that OR has not only a weak basis on, but a few practical applications to urban and regional planning. Such situation is worse in developing countries. This paper aims at investigating the possible basis and limitations or obstacles of OR application to public decision making, especially regional planning. A practical example of OR application to regional planning in Korea and its evaluation will be introduced.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.05a
• /
• pp.343-354
• /
• 2004

A Project planning is one of the most important processes that determines success and failure of the project. Scope management for project planning is also essential job in system integration project. However project planning is very difficult because lots of factor and their relationships should be considered. Therefore project planning of SI project has been done by project manager s own knowledge and experiences. It is necessary to develop an algorithm of WBS(Work Breakdown Structure) identification & document selection along to project's specificity in project management system using AI technique. This study also present method (ODW model) to cope with the limitations of the existing study that has uniformly customizing the methodology by only project complexity. We propose PPSM(Project planning support module) that apply Rule for determination of route map and document level, and CBR for WBS identification.

• Journal of the Korean housing association
• /
• v.15 no.6
• /
• pp.57-65
• /
• 2004

This paper has attempted to analyze the site planning theories of Raymond Unwin (1863-1940), who is called the father of British town planning. A prominent contribution of his was to establish both the site planning of garden suburb and urban housing style in British type. Here it attempts to analyze how he greatly and firmly established the concept of Housing Group, and how he got this the concept from the life and spatial composition of villages. It could be pointed out that the main factors of the Unwin theory are social mixture, creation of community consciousness and informal landscape design, and that the small enclosed space with plenty of amenity is his main theme. It is pointed out that the Unwin theory is composed of recognizing urban life as totality, and group planning theory, and that he definitely originated a new technique: Housing Group. It is analyzed that the syntactic relations between the group planning theory and housing designs in the English garden suburbs are epitomized in Hampstead Garden Suburb, Middlesex.

• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.61-73
• /
• 2002

The Quality Function Deployment(QFD) is a Quality Management technique to maximize customers' satisfaction by reflecting customer requirements into all business processes, including concept definition, product planning, parts planning, process planning, production planning, and sales planning. The basic concept of the QFD is to translate customers' requirements appropriately into engineering characteristics, into parts characteristics, into process characteristics, and into specific requirements and activities in production. In this study, we reviewed and analyzed the application process of the QFD to the development of A2 FATC (Full Automatic Temperature Controller), an automotive component developed and produced by company A. It has been reported that by applying the QFD to the development of A2 FATC, company A. achieved 34% improvement in control robustness quality characteristic, 27% improvement in deviation quality characteristic, and 30% improvement in overall quality characteristics.

• The Journal of Korea Robotics Society
• /
• v.1 no.1
• /
• pp.46-57
• /
• 2006

It is well known that mathematical solutions for multi-agent planning problems are very difficult to obtain due to the complexity of mutual interactions among multi-agent. Most of the past research results thus are based on the probabilistic completeness. However, the practicality and effectiveness of the solution from the probabilistic completeness is significantly reduced by heavy computational burden. In this paper, we propose a practically applicable solution technique for multi-agent planning problems, which assures a reasonable computation time and a real world application for more than 3 multi-agents for the case of general shaped paths in agent movement. First, to reduce the computation time, a collision map is utilized for detecting potential collisions and obtaining collision-free solutions for multi-agents. Second, to minimize the maximum of multi-agent task execution time, a method is developed for selecting an optimal priority order. Simulations are finally provided for more than 20 agents to emphasize the effectiveness of the proposed interactive approach to multi-agent planning problems.

• Progress in Medical Physics
• /
• v.34 no.4
• /
• pp.41-47
• /
• 2023

Purpose: This study aimed to dosimetrically compare the technique of three-dimensional conformal radiotherapy (3D CRT), which is a traditional prophylactic cranial irradiation method, and the intensity-modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) techniques used in the last few decades with the dynamic conformal arc therapy (DCAT) technique. Methods: The 3D CRT, VMAT, IMRT, and DCAT plans were prepared with 25 Gy in 10 fractions in a Monaco planning system. The target volume and the critical organ doses were compared. A comparison of the body V₂, V₅, and V₁₀ doses, monitor unit (MU), and beam on-time values was also performed. Results: In planned target volume of the brain (PTV_Brain), the highest D99 dose value (P<0.001) and the most homogeneous (P=0.049) dose distribution according to the heterogeneity index were obtained using the VMAT technique. In contrast, the lowest values were obtained using the 3D CRT technique in the body V₂, V₅, and V₁₀ doses. The MU values were the lowest when DCAT (P=0.001) was used. These values were 0.34% (P=0.256) lower with the 3D CRT technique, 66% (P=0.001) lower with IMRT, and 72% (P=0.001) lower with VMAT. The beam on-time values were the lowest with the 3D CRT planning (P<0.001), 3.8% (P=0.008) lower than DCAT, 65% (P=0.001) lower than VMAT planning, and 76% (P=0.001) lower than IMRT planning. Conclusions: Without sacrificing the homogeneous dose distribution and the critical organ doses in IMRTs, three to four times less treatment time, less low-dose volume, less leakage radiation, and less radiation scattering could be achieved when the DCAT technique is used similar to conventional methods. In short, DCAT, which is applicable in small target volumes, can also be successfully planned in large target volumes, such as the whole-brain.

• Korean Management Science Review
• /
• v.11 no.3
• /
• pp.129-151
• /
• 1994

This paper focuses on method of setting priorities for telecommunications Standardization in which usually includes prioritization, resource allocation, standardization schedule for each SWA is based on prioritization of SWAs. We mainly used the Analytic Hierarchy Process(AHP) and a modified Delphi technique as a method for planning process. Recently, rapid technology evolution in telecommunications fields increases the necessity of developing more and more new standards. Also increased complexity of technologies makes standards more complicated, more specified and more thick than the past ones. As a result, the number of SWAa(Standardization Work Areas) and SWIs(Standardization Work Iterms) is being increased continuously. Furthermore, rapid telecommunication environment changes such as deregulation, liberalization, privatization, regionalization, and globalization surrounding telecommunications standardization grows increasingly important. To cope with these challenges and to make the more efficient use of the limited standardization resources, i.e., time, financial, personal resources, we will suggest logical and rational approach that is a backbone of strategic plan for telecommunication standardization. The telecommunication standardization planning process involves a MCDM(Multi-Criteria Decision Making) process. The Analytic Hierarchy Process(AHP) is a kind of MCDM approach. Our method is based on a combination of a modified Delphi technique and an application of AHP(spreadsheet model). Analyzed data from Delphi technique is used as inputs to AHP. In addition we also focus on the technique how to combine group judgments and to handle a large number of comparisons.

• The Korean Journal of Community Living Science
• /
• v.18 no.2
• /
• pp.247-263
• /
• 2007

This study was complied to analyze the professional agricultural techniques level and to suggest a desirable direction for the professional education system for women farmer. The research was conducted by using in-field surveys and interviews. Data was gathered by questionnaire from 147 women farmer in five specialized crop regions: strawberry, cucumber, rose, apple, and oyster mushroom. The results obtained are as follows. First, the technique levels in computer usage and electronic commerce, machinery usage, pesticide and fertilizer utilization, facility automation, and eco-agricultural cultivation were low. Second, the demand for professional education, evaluated through technique level by standard management diagnosis, was recognized. Areas of concern included: cucumber (temperature control, carbonic acid gas control, grading, funds management), strawberry (light control, soil temperature control, irrigation watering, shipping), rose (temperature control, light control, funds management, cooperated management), oyster mushroom (growth cabinet sterilizer), and apple (flower bud pinching, defloration, fruit thinning, funds management). Based on the results of this study, the following are suggestions for the planning of a professional education system for women farmer. First, it needs to address formal education in marketing, machinery usage, facilities automation, and techniques in pesticide and fertilizer utilization. Second, it needs to be a multi- level program with appropriate terminology at every level which is suitable to each age and ability of women farmer. Third, it needs a more comprehensive manual developed by need analysis of women farmer and a larger lecturer pool for professional education.

• Journal of Fashion Business
• /
• v.23 no.2
• /
• pp.48-61
• /
• 2019

The objective of this study was to derive a list of creative thinking techniques applied with the requirements of the appropriate technique for the task of fashion design development among the process of fashion product planning. This was done through the analysis of thinking techniques by the type of thinking and idea method. Also, the study presented how each creative thinking technique derived is applied to the task of developing fashion design. The scope of the study was 'Fashion Design Development Task', which corresponds to the design sketch of a fashion item based on the seasonal design concept derived through the fashion design planning stage. Research on the thinking techniques consisted largely of the process of idea thinking, the elements of creative thinking, the patterns and types of thinking. Four studies by Makoto, Michalko, De Bono, and Cox suggesting that the patterns and types of thinking techniques were analyzed for the purpose of this study as empirical studies through FGI of a group of five fashion experts. The analysis results showed that the thinking techniques suitable for the development of fashion design were derived from the technique of fractionation, attributive listing, scamper, morphological analysis, mind mapping, lotus blossom, pattern language, provocative operation, and forced connection. In particular, it can be confirmed that the scamper was treated as an efficient and practical technique in the many studies.