• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1716-1729
• /
• 2010

본 논문에서는 링과 메쉬 구조를 이용한 경제적인 계층형 광통신망 설계 문제를 다룬다. 계층형(hierarchical) 광통신망 설계 문제에서 고려하는 비용 요소는 링 구조의 광통신망 내부(intra-ring) 트래픽 처리를 담당하는 OADM(Optical Add-Drop Multiplexer), 메쉬 구조의 링간(inter-ring) 트래픽 처리를 담당하는 OXC(Optical Cross-Connect) 및 OADM간 케이블 비용 및 OXC간 케이블 비용이다. 이 논문에서 제시하는 계층형 광통신망 설계 문제에서는 OADM 및 OXC의 트래픽 처리 용량과 각 링의 OADM 개수 제약을 고려한다. 이 논문에서는 계층형 광통신망 설계 문제를 정수계획법(integer programming) 모형으로 모델링하며, 링의 대칭성(symmetry)을 부분적으로 제거하는 절단평면(cutting planes)을 개발한다. 또한, 우수한 품질의 해를 적절한 시간동안 찾기 위해 휴리스틱 알고리즘을 개발한다. 모의 실험을 통해 절단평면과 휴리스틱 알고리즘의 성능을 평가한 결과 크기가 작은 문제에 대해서는 이 논문에서 개발한 절단평면을 정수계획법 모형에 추가함으로서 최적해를 구하는 시간을 크게 단축시키며, 크기가 큰 문제에 대해서는 이 논문에서 개발한 휴리스틱 알고리즘이 상용 소프트웨어인 CPLEX가 찾는 휴리스틱 해보다 우수한 해를 발견함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.167-171
• /
• 1995

The orientation dependence of sputtering rate in the sendust polysrystalline targets was studied, It was fount from the present work that the erosion process is not uniform from one grain to another even within a target because of its polysrystalline nature showing many different orientation of grains. The grains oriented to promote efficient erosion were characterized by the close-packed planes which have large interplanar spacing and strong binding energy, The characteristic line patterns appeared on as-sputter target surface are discussed in terms of symmetry of crystllographic planes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.187-191
• /
• 1995

An experimental study to analyze thd hot extrusion processes of regular square section through square dies is carried out by using plasticine as a model material at room temperature. The experimental setup for the extrusion of squared section from round billets through square dies is designed and manufactured. In order to visullize the plastic flow in the extrusion process the technique of gridding on the planes of the sysmmetries and a stacking the desks with different colors are employed. Velocity fields on the symmetry planes are obtained by using grid distortion.

• 대한수학회지
• /
• 제58권6호
• /
• pp.1449-1460
• /
• 2021

In this paper, we consider the following nonlocal fractional Laplacian equation with a singular nonlinearity (-∆)^su(x) = λu^β (x) + a₀u^-γ (x), x ∈ ℝⁿ, where 0 < s < 1, γ > 0, $1<{\beta}{\leq}\frac{n+2s}{n-2s}$, λ > 0 are constants and a₀ ≥ 0. We use a direct method of moving planes which introduced by Chen-Li-Li to prove that positive solutions u(x) must be radially symmetric and monotone increasing about some point in ℝⁿ.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.325.2-325
• /
• 2002

A new methodology is presented for the multi-degree-of-freedom vibration absorber for an elastically suspended rigid body with the planes of symmetry in general motion. Unlike the common single degree-of-freedom vibration absorber, the presented methodology makes use of both linear and rotational properties of the absorber. It is suggested that an absorber is designed separately for the in-plane and out-of-plane axes of vibration and combined the two cases for a six-degree-of-freedom absorber. (omitted)

• 대한치과교정학회지
• /
• 제37권3호
• /
• pp.182-191
• /
• 2007

본 연구는 두개악안면 3차원 입체영상을 이용한 진단 시 유용한 정중시상기준평면 설정에 도움이 되고자 시행되었다. 임상검사를 통하여 안면이 좌우 대칭으로 보이는 성인 정상교합자를 대상으로 두경부 전산화단층사진을 촬영하고 컴퓨터 프로그램을 이용하여 3차원 입체영상으로 재구성하였다. 두개의 정중시상부에 위치하는 Cg, ANS, PNS, Ba, Op 등의 계측점과 Po, Or로 구성된 FH plane을 이용하여 6개의 정중시상기준평면(Cg-ANS-Ba, Cg-ANS-Op, Cg-PNS-Ba, Cg-PNS-Op, FH${\perp}$(Cg, Ba), FH${\perp}$(Cg, Op))을 설정하고, 좌우 대칭성 의 Z, Fr, Fs, Zy, Mx, Ms등 6쌍의 계측점을 선정한 후, 설정된 정중시상기준평면에서부터 각 계측점까지의 좌측 및 우측 거리를 계측하고 t-검정을 통하여 유의차를 검정하는 한편, 좌우 차이값의 정도를 설정된 기준평면간에 비교하였다. 또한 정중시상 기준평면 설정의 재현도를 알아보기 위하여 정중시상기준평면의 설정에 사용된 계측점을 2주 간격으로 재계측하고 비교 분석한 결과, 본 연구에서 사용된 모든 정중시상기준평면이 두개악안면의 3차원적 분석 시 기준평면으로 사용될 수 있으며 특히, Cg와 ANS를 포함한 정중시상기준평면이 보다 타당함을 시사하였다.

• 복식문화연구
• /
• 제26권4호
• /
• pp.531-546
• /
• 2018

The purpose of this study is to comparatively examine techniques and expressive characteristics of batik by focusing on the work of DanZhai and that of ZhenNing Buyi. We collected 50 pieces of batik each from Miao and Buyi in Chinese GuiZhouSheng and then analyzed their colors and patterns. The findings show that most of Miao's batik had deep and soft tones, while that of Buyi most often had blackish tone since the number of dyes in the latter is higher than that in the former. Miao often used patterns expressing animals or animals and plants, while Buyi frequently used geometric ones. An examination of specific motifs demonstrated that butterflies, fish, and flowers were most often used by Miao, while dots, vortexes, lines, and lozenges were frequently utilized by Buyi. For expressive techniques, both Miao and Buyi commonly used simple stylized expression or complex expression combining stylized and geometric techniques. Maio's motifs were often decoratively expressed with delicate curves, while Buyi's motifs had simple structures, so pictures were neatly expressed with thick lines and wide and simple planes. For the composition of the motifs, incomplete symmetry between top and bottom and between left and right often appeared in Maio, while in Buyi complete symmetry was frequently shown.

• 분석과학
• /
• 제5권1호
• /
• pp.121-126
• /
• 1992

GaAs ${\Sigma}=19$, [110] tilt grain boundary의 구조를 투과전자현미경을 이용하여 연구하였다. Higher-Order Laue-Zone(HOLZ) 빔들과 {200} 빔과의 dynamical coupling 결과를 검토하여 입계 양쪽 각각의 입자(grain) 내 Ga-As의 상대적 위치(방향성)를 결정하였으며, 두 입자 사이에는 inversion symmetry가 결합되지 않은 ${\Sigma}=19$ coincidence에 해당하는 교차각이 있었다. 계면은 $\{331\}_A/\{331\}_B$, [110] 결정면을 따라서 발생하는 경향이 강함을 관측했다. 이 facet에서의 원자구조 및 격자이동 등을 고분해 투과전자현미경을 이용하여 밝혔다. 5-, 7-, 그리고 6-member ring의 조합으로 되어 있는 단위를 계면원자구조 model로 제시했다.

• 건축역사연구
• /
• 제26권4호
• /
• pp.35-44
• /
• 2017

The purpose of this study is to classify three-Kan hipped and gable-roofed Buddhist temples with the construction of their eave curve of part chunyeo and examine the characteristics and causes. The conclusions have been drawn as follows: First, there are largely three ways to secure symmetry in eave curve of part chunyeo. One is to obtain symmetry in eave curve of part chunyeo by making the size of eaves curves on well sides the same and forming symmetric curves in the front section along with the side roof and then forming the straight line in the central part (hereinafter referred to as the long straight line section method). The second is a method to enlarge eaves curves in the front and form eaves curves on the roof section to be symmetric (hereinafter referred to as the front is larger than side eaves curves method). The third is the method to make eaves curves in the roof section to be symmetric by adjusting the roof length and making difference between the front and side roof's length minimum (hereinafter referred to as the roof length-controlling method). Second, there are 16 cases applying two or more methods, and they are the mainstream. Third, there are 12 cases applying the front is larger than side eaves curve method and roof length-controlling method both, which seems to be the most universal. To sum up, they secured symmetry in roof edges considering the construction of seonjayeon and pyeongyeon according to the size of the structure, recognition on the directions of entrance into the area of the building, forms of planes, harmony with structures around, recognition on roof curves in accordance with the size, and also structural faults in the chunyeo part.

• 한국결정학회지
• /
• 제11권1호
• /
• pp.34-41
• /
• 2000

The group-theoretical approach analyzing the domain structure and the domain wall orientations of the ferroelastic crystal was introduced. These theoretical results were investigated by comparing them with the experimental results of several ferroelastic crystals, CsPbCl₃, Pb₃(PO₄)₂, and LiCsSO₄, which were grown by the Czochralski and solution methods, respectively. both results were agreed well and also consistent with those of previous works such s the strain method and the geometrical consideration. The group-theoretical approach showed that the ferroelastic domain walls must be the crystallographical prominent planes with fixed indices and classified by the symmetry elements characterizing the permissible domain walls. So the group-theoretical approach could be suggested as a new method for analyzing the structure of the ferroelastic domain and domain walls.