• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.162-165
• /
• 2004

고성능 액체로켓엔진 개발을 위하여 터보펌프를 사용하는 재생냉각형 액체로켓엔진시스템의 배치안을 마련하였다 엔진시스템을 구성하는 부품들에 대하여 각각의 특성을 고려하고 현실적으로 제작 및 조립이 가능하도록 3차원 디지털 모형을 제작하여 검증하였다. 1단 엔진시스템은 1축 김발링을 하며 4개의 엔진 조립체로 클러스터링 할 수 있도록 설계하였다. 2단용 엔진시스템은 2축 김발링을 하며 1개의 엔진 조립체로 구성하였다. 1단 및 2단 엔진시스템의 조릴 및 분해 공정 그리고 관련 프로그램 또한 개발하였다. 그리고 엔진시스템의 조져 및 분해 공정을 효율적으로 수행하기 위하여 여러 형태의 전용 치/공구 또한 개발하였다.

• 한국실내디자인학회논문집
• /
• 제26권3호
• /
• pp.81-90
• /
• 2017

Subsidiary welfare facilities in an apartment complex are one of the most important factors for consumers when they buy an apartment due to an increase of consumers' consciousness level, increase of leisure time, and increase of cultural life. This study aims to analyze layout types and characteristics of subsidiary welfare facilities at the apartment complexes in the second phase new towns, investigate the current situation and find out the improvement direction. For this purpose, this author investigated three "second phase new towns" which were designated as a new town at similar time, and selected a total of 15 apartment complexes by selecting 5 complexes in each of the three new towns. Literature survey, case visit, photo shoot, user observation survey were used as study methods. The results of the study are as follows. First, it was found that a mixed type was the most common type of plane layout types in the subsidiary welfare facilities. This type improves accessibility and equity of the residents as the facilities are appropriately placed based on the functions and the user characteristics. Second, it can be considered that a distributed type for senior citizen centers and daycare centers may give independence to specific users, but it may give a sense of alienation to the elderly. Moreover, it does not have enough community so that it is necessary to make proper supplementation. Third, there were two lay out types. The first one is that the subsidiary welfare facilities are placed with step difference and the second one is that they are placed in sunken places using the underground space. Fourth, all layout types of outdoor facilities are distributed types, and it is considered that measurements for a proper balance of accessibility and equity are required.

• 한국실내디자인학회논문집
• /
• 제41호
• /
• pp.112-120
• /
• 2003

The purpose of this study is to review the plan composition characteristics of the super high-rise apartment. 20 cases were selected in Seoul and Kyunggi area that were planned or constructed since 1999, and 10 unit plans were analyzed to review such design characteristics as block type & entry access type, plane figure, opening layout, area distribution and spice composition of unit plan. The result of the study shows that the super high-rise apartment has more variant block types and plane figures compare with the conventional high-rise apartment, and it also has several design characteristics in plane composition such as the increase of the number of the walls with openings, the weakening of the spatial centralization of a living room and the dispersion of rooms with the increase of connection by corridors.

• 융복합기술연구소 논문집
• /
• 제2권1호
• /
• pp.43-48
• /
• 2012

Generally, in-plane position of moving object is measured referring to the reference pattern attached to the object. From optical camera to magnetic reluctance probe, there are many ways detecting a variation of the periodical pattern. In this paper, the various operating principles developed for in-plane positioning are reviewed and compared each other. And, a novel method measuring large rotation as well as x, y linear displacements is suggested, including a detailed description of the overall system layout. It is a modified version of the surface encoder, which is a robust digital measuring method. From the surface encoder, the rotation of an object is measured indirectly through a compensated input of optical servo and independently of linear displacements. So, the operating range can be extended simply by enlarging the reference pattern, without magnifying the decoding units.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.639-643
• /
• 2018

전자 시스템이 소형화, 이동성의 요구에 따라 전력 변환의 필요성이 계속 증가하고 있다. 또한 전력 변환에는 전력 효율과 함께 전력 변환시스템의 소형화를 위해 적용하는 스위칭에 의한 잡음으로부터 시스템 안정성이 보장되어야 한다. 따라서 전력 변환시 스위칭 잡음을 감소시킬 수 있는 대책이 필수적이다. 본 논문에서는 DC/DC Buck Converter회로를 구성하였고, reference plane을 갖는 4층 PCB 회로 구조에서 부품의 배치를 변경할 경우 발생하는 스위칭 잡음특성을 비교 분석하였다. 또한, Reference Plane을 제거한 양면 PCB회로 구조에서 부품 배치를 달리하였을 경우 스위칭 잡음 특성을 각각 시뮬레이션으로 비교 분석하였다. 그 결과 4층 PCB회로 구조에서는 Current return path에 따라 Radiated Emission 특성이 12dB, Conducted Emission 특성이 7~8dB 감소됨을 확인하였다. 또한 양면 PCB회로 구조에서는 Conducted Emission이 20~25dB 감소됨을 확인하였다. 이로써 전력 변환 회로를 설계할 경우 Current return path의 구성에 따라 잡음 특성을 향상시킬 수 있음을 확인하였다.

• 건축역사연구
• /
• 제18권5호
• /
• pp.81-100
• /
• 2009

The study on Buddhism architecture in early Joseon dynasty was inactive. The period of King Sejo is important for studying the trend of Buddhism architecture in early Joseon, that was transmitted from the end of Goryeo dynasty, but it was difficult to know its exact situation due to lack of related records. The records were all written by Kim Su-ohn, which are Wongaksabi' 'Sangwonsajungchanggi' 'Bongseonsagi 'Geonginsajungchanggi'. The main hall was mainly second floor and there were necessarily annexed buildings at the right and left of the main hall. So the plane figure of $\Box\Box\Box$ was shown. It was a main stream for main hall. This layout may be referred to search for the origin of the layout in courtyard based structure(中庭形) in the late Joseon dynasty. Most of temples had 3 gates. Some part of horizontal corridor was used as 2 gates and the outer gate, far from main hall, was without corridor. The gate leading to front yard of main hall was called front gate, the next middle gate and the outer gate was Oisamun(外沙門) or Samun(沙門). Im most of the temples, people could enter into the front yard through pavilion which had the function of bell tower. The pavilions were located between front gate and first corridor. It is thought that this layout of the place for making bean curd outside the temple area will contribute to different studies on temples making bean cure in the future. The records about temples's foundation studied above are a little different between temples, but have more similarities. There common denominators represent the architecture tendency of Buddhist temples in the related period. It is thought that such a tendency was also shown on architecture of other temples during the reign of King Sejo as well as Buddhist temples.

• 플랜트 저널
• /
• 제13권4호
• /
• pp.41-47
• /
• 2017

본 논문은 해양플랜트 입찰단계에서 시스템엔지니어링(Systems Engineering)기법을 이용하여 해양플랜트를 구성하고 있는 장비 배치를 검증(Verification)할 수 있는 검증수행모델에 대한 연구이다. 해양플랜트 상부구조물(Topside) 유지보수 장비들을 엔지니어링하기 위하여는 Topside 장비 Layout검증이 선행되어야 한다. 하지만 입찰단계에서 완성도가 높지않는 FEED(Front End Engineering Design)결과물로 인한 많은 오류가 존재함에도 불구하고 검토시간의 부족 등의 이유로 검증을 수행하지 못하는 경우가 존재한다. 따라서 본 논문에서는 다학제간 접근방식인 시스템엔지니어링 프로세스를 간략화하여 적용함으로써 제한된 시간내 효과적으로 장비배치를 검증할 수 있는 검증수행모델을 제안하였다. 모델의 구성은 기능전개모델(Functional Deployment Model)을 통하여 구축하였으며 사례연구를 통하여 본 Topside 장비 배치에 대한 검증 수행모델을 검증하였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제6권2호
• /
• pp.115-123
• /
• 2003

Oviposition and egg laying is an important physiological and behavioural event in the life cycle of the silkworm, Bombyx mori (L). Oviposition and egg laying is dependent on a number of intrinsic and extrinsic factors viz., neural, hormonal, environmental, physical, behavioral etc for the perpetuation of population. Although, the virgin female moths have fully developed embryos but active egg laying begins under the influence of mating which provides essential copulation stimulus for oviposition. After mating drastic biochemical changes occurred that incites egg laying under the influence of optimum environmental conditions. Weight of pupae as well as larval density has significant role on oviposition and egg laying behaviour in the silkworm wherein high pupal weight and inadequate rearing space affects not only the biology, morphology and physiology but also the oviposition and egg laying. Surface topography, plane of inclination, mating length, age of male moth, temperature and photoperiod etc has significant effect on reproductive physiology of silkworm. An attempt has been made in this review article to elucidate briefly the works carried out on mating behaviour, direct and indirect copulation stimulus, vitellogenesis, influence of environmental factors besides effect of weight of pupae and or pharate adult and larval density on oviposition and egg laying behavior in the silkworm, B. mori and its significance in silkworm seed production.

• Journal of information and communication convergence engineering
• /
• 제19권2호
• /
• pp.114-119
• /
• 2021

This paper proposes a method to find an optimal T' with the most terminal of the subset of T' trees that can be connected by a given length by improving a memetic genetic algorithm within several constraints, when the set of terminal T is given to the Euclidean plane R². Constraint (1) is that a given length cannot connect all terminals of T, and (2) considers only the rectilinear layout of the edge connecting each terminal. The construction of interconnections has been used in various design-related areas, from network to architecture. Among these areas, there are cases where only the rectilinear layout is considered, such as wiring paths in the computer network and VLSI design, network design, and circuit connection length estimation in standard cell deployment. Therefore, the heuristics proposed in this paper are expected to provide various cost savings in the rectilinear layout.

• 대한전자공학회논문지
• /
• 제22권2호
• /
• pp.36-43
• /
• 1985

NMOS IC layout에서 직사각형 도형의 갯수에 비례하는 검사시간을 소모하는 설제규칙 검사의 알고리즘의 제안되고 그것에 의한 program이 개발 되었다. 일반적인 설계규칙 검사 algorithm의 시간소모는 0(nlogn) 혹은 0(n**1 . 2)에 비례하는데 반하여 (n은 직사각형 도형의 갯수) 이 논문에서는 pattern의 DF(direct format) data와 bit-map plane을 연관 지음으로써 0(n)에 비례하는 시간소모를 달성 할 수 있었다.