• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.531-534
• /
• 2002

NiO buffer layers for YBCO coated conductors were deposited on hi-axially textured Ni substrates by MOCVD(metal organic chemical vapor deposition) method, using single solution source. To establish the processing condition, oxygen partial pressure and deposition temperature were changed. The surface orientation and degree of texture were estimated by X-ray diffraction, X-ray pole figure and atomic force microscopy. The FWHMs of in-plane and out-of-plane of the NiO films were about 10$^{\circ}$. The surface roughness was a function of deposition temperature. The AFM surface roughness of NiO films is in the range of 3∼10 nm, when NiO films was grown at 450∼530$^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.535-538
• /
• 2002

Cube-textured Ni substrates for YBCO coated conductors were fabricated by cold-rolling and annealing of Ni powder compacts. To establish the optimum sintering temperature, tensile test was performed for the Ni rod sintered at various temperatures. The Ni rods prepared at above 100$0^{\circ}C$ showed good mechanical properties due to the complete densification of the Ni rods. The Ni rods were rolled to final thickness of 100 ${\mu}{\textrm}{m}$ and then annealed at 100$0^{\circ}C$ for various annealing time for texture development. The texture analysis made by 2 $\theta$ scan and pole-figure showed that the cube texture was developed in a short time of a few munitues. The FWHM of in-plane and out of plane texture of the prepared Ni tapes was 8-10$^{\circ}$. The AEM surface roughness of the Ni tapes was as smooth as 3 nm.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.289-292
• /
• 2000

In order to evade the patent of Oak Ridge National Laboratory (RABiTS process) and search for more economical process, a new process for producing the biaxially textured Ni tape by electrodeposition has been investigated. Electrodeposition was performed in the modified Watts bath. The crystal orientations of electrodeposited Ni were analysed by X-ray pole figure, ${\phi}$-scan and ${\omega}$-scan. The electrodeposited Ni tape showed cube texture with good out-of plane(< 8${\circ}$) and in-plane alignment(< 20${\circ}$).

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.81-84
• /
• 2003

The effect of annealing condition on the texture and microstructure development in Ni tapes fabricated by cold-rolling including powder metallurgy was investigated. The Pole-figure results showed that the Ni tapes annealed at lower temperature than 50$0^{\circ}C$ were the mixture of brass deformation texture and cube texture. The specimens annealed at high temperatures had only well-developed cube texture and the FWHMs of in-plane and out-of-plane were in the range of 8-10$^{\circ}$. The degree of texture was not significantly depended on annealing temperatures. The grain morphologies of Ni tapes prepared at low temperatures showed serrated grain boundaries due to incomplete recrystallization, but the specimens prepared at high temperatures showed stabilized grain shape without serrated grain boundaries.

• International Journal of Contents
• /
• 제5권3호
• /
• pp.19-23
• /
• 2009

Laser scanning technology is a maturing measurement technology which is capable of obtaining 3D measurement data of objects with high-accuracy, high-resolution and in a short time. Laser scanners are used more and more as surveying instruments for various applications. This paper describes the procedure of 3D data acquirement using terrestrial LiDAR and section drawing extraction through a series of processing for remodeling the interior of a department building. Accurate drawings are needed for improvement construction of building interior. However if the design drawings of that time of construction work were lost or damaged or actual dimensions of drawings differ from those of design drawings, the interior should be resurveyed. In this study, the extraction process of interior plane figures were suggested through using laser scanning and related reverse engineering software

• 반도체디스플레이기술학회지
• /
• 제10권1호
• /
• pp.83-89
• /
• 2011

In the case of the tracking system with an active camera, it is very difficult to guarantee real-time processing due to the attribute of vision system which handles large amounts of data at once and has time delay to process. The reliability of the processed result is also badly influenced by the slow sampling time and uncertainty caused by the image processing. In this paper, we figure out dynamic characteristics of pixels reflected on the image plane and derive the mathematical model of the vision tracking system which includes the actuating part and the image processing part. Based on this model, we find a controller that stabilizes the system and enhances the tracking performance to track a target rapidly. The centroid is used as the position index of moving object and the DC motor in the actuating part is controlled to keep the identified centroid at the center point of the image plane.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.467-470
• /
• 2003

This study tries to introduce the precision measurement of 3-dimensional terrain of reservoir using Echo Sounder and RTK-GPS which is unprecedented in domestic. In this study, to introduce the way to produce the plane figure, the cross section and data of underside reservoir by constructing the 3-dimensional terrain models using 3-Dimensional data gained by measurement.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제58권2호
• /
• pp.283-298
• /
• 2019

초등학교 교육과정에 포함된 측정 속성 가운데 둘레와 넓이, 겉넓이와 부피는 5, 6학년에서 집중적으로 다루어진다. 그러나 이 영역에서 학생들의 수행능력이 어느 정도가 되며 어떤 문제가 있는지에 대해서는 알려진 바가 많지 않다. 이 연구는 평면도형의 둘레와 넓이, 입체도형의 겉넓이와 부피에 대한 초등학교 6학년 학생들의 이해 정도를 진단하고, 각 요소별 수행 능력을 비교 분석하여 차후 수학 교과서 개발 및 측정 영역 지도를 위한 시사점을 도출하고자 하였다. 이를 위해 둘레, 넓이, 겉넓이, 부피, 둘레와 넓이의 관계, 겉넓이와 부피의 관계에 관련된 문항을 구성하여 6학년 학생 95명을 대상으로 수행 능력을 분석하였다. 분석결과 초등학교 6학년들의 수행능력이 둘레, 겉넓이, 둘레와 넓이의 관계, 겉넓이와 부피의 관계 영역에서 특히 낮은 것으로 드러났다. 이러한 연구 결과를 바탕으로 둘레와 넓이, 겉넓이와 부피 개념의 도입 순서와 지도 방법, 지도 순서 등에 대한 몇 가지 아이디어를 제안하였다.

• East Asian mathematical journal
• /
• 제30권2호
• /
• pp.197-222
• /
• 2014

The purpose of this research is to find out if it is possible to apply the Waldorf School's mathematics education method to Korean alternative schools which are run under the national curriculum. To achieve this, the researcher conducted class on geometry for three weeks with ten 7th graders(four girls and six boys) from Apple Tree Waldorf alternative school in Busan, which has adopted Valdorf education courses. For the first two weeks, the class was about 'fundamental geometrical construction', and then it was evaluated. On the third week, the lesson was on plane figures, followed by a test with 9 plane figure questions that are based on general middle school mathematics curriculum. The result shows that most of the students understood 'fundamental geometrical construction'. When it comes to the test on 'plane figures', seven students got 8 out of 9 right, two students got 6 out of 9 right, and one of them had difficulty solving the questions. According to the results of this research, it is thought that there will be no problem for students to understand mathematical concept even if the Waldorf School's mathematics education method is applied to Korean alternative schools. Also, the Waldorf School's mathematics education method is considered to be a good teaching model for the Korean mathematics curriculum which places emphasis on 'mathematical creativity' in regard to the curriculum and contents.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.112-112
• /
• 2016

열전 발전은 버려지는 폐열을 재사용 가능한 에너지로 전환할 수 있다는 점에서 차세대 청정 에너지원으로 분류되며, 19세기 초 발견된 이래 꾸준히 연구되어온 연구 분야이다. 특히 1990년대 열전소재로의 나노 기술의 접목에 따라 열전성능(figure of merit, ZT)이 2 배 이상 증가 되면서, 고성능의 열전 소재 개발을 위해 나노구조화 연구가 활발히 진행되고 있다. 하지만, 기존의 열전 특성 측정용 상용 장비의 경우, 벌크형 소재를 대상으로 설계되어 연구실 수준에서 개발되고 있는 마이크로미터 스케일의 두께를 가지는 박막형 열전 소재의 두께 방향 (cross-plane)의 열전 특성을 평가하는데 정밀성이 떨어져서 적합하지 않다. 이러한 표준화된 측정 기술의 부재로 인하여 최근 연구되고 있는 나노소재들의 열전 특성 측정 결과를 정확하게 측정하지 못하고 있다 [1] 본 연구에서는 박막형 열전 소재의 열전성능을 평가하는데 가장 중요한 요소인 열전도도를 측정하기 위해 장비를 설계하고, 장비의 측정 능력에 대해 평가하였다. 특히, 측정 포인트 간 큰 온도 차가 발생하여 비교적 쉽게 측정이 가능한 너비 방향 (in-plane) 이 아닌, 온도 차가 작은 박막의 두께 방향의 열전도도를 측정하였다. 그리고 센서의 측정 능력을 평가하기 위해, 폴리이미드를 대상으로 $-10-70^{\circ}C$ 온도 범위에서 측정한 결과와 벌크형 소재 대상으로 신뢰성이 확보된 보호열판법을 이용해 측정한 결과를 비교하였다.