• Applied Microscopy
• /
• v.43 no.2
• /
• pp.88-97
• /
• 2013

Technical investigation to figure out the problems arising during in-situ heating electron backscatter diffraction (EBSD) analysis inside scanning electron microscopy (SEM) was carried out. EBSD patterns were successfully acquired up to $830^{\circ}C$ without degradation of EBSD pattern quality in steels. Several technical problems such as image drift and surface microstructure pinning were taking place during in-situ experiments. Image drift problem was successfully prevented in constant current supplying mode. It was revealed that the surface pinning problem was resulted from the $TiO_2$ oxide particle formation during heating inside SEM chamber. Surface pinning phenomenon was fairly reduced by additional platinum and carbon multi-layer coating before in-situ heating experiment, furthermore was perfectly prevented by improvement of vacuum level of SEM chamber via leakage control. Plane view in-situ observation provides better understanding on the overall feature of recrystallization phenomena and cross sectional in-situ observation provides clearer understanding on the recrystallization mechanism.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.1
• /
• pp.61-78
• /
• 1993

Large offshore structure are to be considered for oil storage facilities , marine terminals, power plants, offshore airports, industrial complexes and recreational facilities. Some of them have already been constructed. Some of the envisioned structures will be of the artificial-island type, in which the bulk of structures may act as significant barriers to normal waves and the prediction of the wave intensity will be of importance for design of structure. The present study deals wave scattering problem combining reflection and diffraction of waves due to the shape of the impermeable rigid upright structure, subject to the excitation of a plane simple harmonic wave coming from infinity. In this study, a finite difference technique for the numerical solution is applied to the boundary integral equation obtained for wave potential. The numerical solution is verified with the analytic solution. The model is applied to various structures, such as the detached breakwater (3L${\times}$0.1L), bird-type breakwater(318L${\times}$0.17L), cylinder-type and crescent -type structure (2.89L${\times}$0.6L, 0.8L${\times}$0.26L).The result are presented in wave height amplification factors and wave height diagram. Also, the amplification factors across the structure or 1 or 2 wavelengths away from the structure are compared with each given case. From the numerical simulation for the various boundary types of structure, we could figure out the transformation pattern of waves and predict the waves and predict the wave intensity in the vicinity of large artificial structures.

• Journal of the Korean housing association
• /
• v.18 no.2
• /
• pp.113-120
• /
• 2007

This study is to investigate the contents and status of documentary records based on "Hyogyeongdang Gyechukmun" related to the Old House of Papyeong Yun's family. This house is located in Goegok-dong, Daejeon Metropolitan city, and is considered as one of the high-class houses in the mid-Chosun dynasty. The results might be summarized as follows: First, Hyogyeongdang Gyechukmun was written by Yun Seom in 1675 (the 1st year of King Sukjong's reign), which is a kind of general drawing book containing a plane figure and a bird's-eye-view of the old house. It is an important historical record to identify the feature and characteristics of the high-class houses in those days. Second, Papyeong Yun's Old House was founded with five buildings including a shrine, women's quarters, Hyogyeongdang, servants' quarters, and a warehouse. On the southern front, there used to be a pond. Third, the standard measure used to build the old house was about 310.00/尺(chuck). Chuck(尺) is the measuring unit of the Chosun Dynasty.

• Journal of the Korean Vacuum Society
• /
• v.20 no.2
• /
• pp.141-145
• /
• 2011

ZnO:Al thin films were deposited by RF magnetron sputtering with various base pressure, and their structural, optical, and electrical properties were studied. The influence of the base pressure on the ZnO:Al thin film was confirmed and a high-quality thin film was obtained by controlling the base pressure. In all Al-doped ZnO thin films, the preferred orientation of (002) plane was observed and light transmittance in visible region (400 nm~800 nm) had above 85%. With decreasing of base pressure, crystallinity, resistivity, and figure of merit were improved. The improvement of resistivity with base pressure was attributed to the change of grain size.

• Korean Institute of Interior Design Journal
• /
• v.26 no.1
• /
• pp.142-152
• /
• 2017

This study investigated Renaissance and Baroque architectural characteristics found in contemporary public buildings in Seoul, which are National Museum of Modern and Contemporary Art Seoul Branch(MMCA) and Dongdaemun Design Plaza(DDP). Among H. $W{\ddot{o}}lfflin^{\prime}s$ five categories for Renaissance-Baroque art study, four categories (Clearness/Unclearness, Plane/Recession, Closed form/Open form, Multiplicity/Unity) are applied for the analysis as the architectural issues of Transparency/Concealment, Exhibited/Experienced Depth, Formal/Figural, and Composed harmony/Generated Unity. As a result, MMCA showed the characteristics of the extreme of Modern classic such as transparency, homogenization of space, formalism, and composition of multiple elements. Meanwhile, the study could find various Baroque characteristics from DDP such as separation of indoor and outdoor, phenomenological depth, rule breaking, and generation of figure. The study finally argued that DDP would not be an anti-modern, but try to inherit and overcome the modern architecture to explore different possibilities, and that the similar relationship between Renaissance and Baroque art could be found in these two cases.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.56-59
• /
• 2004

In this paper, we investigated the influence of gap length and tip radius on breakdown of mineral based insulation oil. Applied voltages were DC and AC voltage. Electrode system was needle-plane structure. The tip radius of needle electrode was 5, 10, 20 and 25${\mu}m$, respectively. We measured breakdown voltage for each of tip radius with increasing electrode gap, 2mm to 12mm. Electric breakdown strength at tip was calculated using Mason's equation contained geometric figure. As gap length increased, breakdown strength increased linearly. But, as tip radius of needle increased, breakdown strength decreased exponentially. It can be explained by the phenomenon that electron is easily injected, as tip radius increases, and effective work function decreases. When appling DC voltage, breakdown strength was higher when polarity of needle was negative than positive. It is because of the space charge effect in accordance with the influence of liquid motion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.648-651
• /
• 2004

Pb0.5Sr0.5TiO3(PST) thin films were deposited on the LaNiO3 (LNO(100))/Si and Pt/Ti/SiO2/Si substrates by the alkoxide-based sol-gel method. Structural and dielectric properties of PST thin films for the tunable microwave device applications were investigated. The PST films, which were directly grown on the Pt/Ti/SiO2/Si substrates showed the random orientation. For the LNO/Si substrates, the PST thin films exhibited highly (100) orientation. Compared with randomly oriented films, the highly (100)-oriented PST thin films showed better dielectric constant, tunability, and figure of merit (FOM). The dielectric constant, tunability, and FOM of the highly (100)-oriented PST thin film increased with increasing annealing temperature due to the decrease in lattice distortion. The differences in dielectric properties may be attributed to the change in the film stress and the in-plane oriented Polar axis depending on the substrate was used. The dielectric constants, dielectric loss and tunability of the PST thin films deposited on the LNO/Si substrates measured at 1 MHz were 483, 0.002, and 60.1%, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.900-912
• /
• 2006

A GPS receiving antenna installed in the missile's warhead is designed and fabricated at a center frequency 1.575 GHz. The circular shaped antenna is installed in the middle of the warhead where the antenna's patch and the ground plane are connected with a hollow cylindrical shaped short pin. Using the dual feeding and phase difference method, an omni-directional radiation pattern which direction is normal to the missile's axis(H-plane) is obtained. The optimized diameters of the circular patch and the cylindrical ring typed shorting pin of the GPS receiving antenna which use the FR4.material(dielectric constant $\varepsilon_r=4.6$) are 59.5 mm and 14 mm, respectively. The cylindrical body with diameter 100 mm and height 500 mm is attached to the lower part of the warhead in order to complete the missile figure. The radiation patterns are measured by changing the angle and phase between the dual feeding points. When the phase difference of dual feeding is $100^{\circ}$ and the angle between the dual feeding points is $100^{\circ}$, the nearly omni-directional radiation pattern in the H-plane is obtained. In this case, the antenna gain is -5.55 dBd and the relative level difference between the maximum and the minimum radiation intensity is 3.98 dB.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.1
• /
• pp.90-101
• /
• 2003

Gait analysis can provide a better understanding of how the alignment of the lower limb and foot can contribute to force observed at the knee. Anatomic and mechanical factors that affect loading in the knee pint can contribute to pathologic change seen at the knee in degenerative pint disease and should be considered in treatment plan. The purpose of this study is to present the gait analysis data and to determine whether there is any relationships between alignment of the lower limb, foot progression angle and knee pint moments in elderly healthy women with 3-dimensional motion analyzer. The results were as follows; 1. Cadence showed 114.8 steps/min, gait speed showed 1.05 m/s, time per a stride showed 1.06 sec, time per a step showed 0.53 sec, single-supporting phase was 0.41 sec, double-supporting phase was 0.24 sec, stride length was 1.04 m, Step length was 0.56 m. 2. According to the parameters of kinematics, the maximal knee flexion angle through swing phase showed left $46.82^{\circ}$, right $40.19^{\circ}$ and the maximal knee extension angle showed left $-1.32^{\circ}$, right $2.01^{\circ}$. knee varus showed left $26.90^{\circ}$, right $30.93^{\circ}$. 3. Moment, one of kinetic parameters of knee pint the maximal flexion moment showed left 0.363. Nm/kg, right 0.464 Nm/kg and maximal extension moment showed left 0.389 Nm/kg, right 0.463 Nm/kg. The maximal. adduction moment showed left 0.332 Nm/kg, right 0.379 Nm/kg and the maximal internal rotatory moment showed left 0.13 Nm/kg, right 0.140 Nm/kg. 4. On sagittal plane, the maximal power of knee joint showed left 0.571 J/kg, right 0.629 J/kg. On coronal plane, the maximal power of knee joint showed left 0.11 J/kg, right 0.12 J/kg. On transverse plane, the maximal power of knee joint showed left 0.058 J/kg, right 0.072 J/kg. 5. The subject who had varus alignment of the lower extremity had statistically higher in knee adduction moment in mid stance phase. 6. The subject who had large foot progression angle had statistically lower in knee adduction moment in late stance phase. A relationship was observed between the alignment of the lower extremity and the adduction moment of the knee joint during stance phase. Hence, we need some research to figure, out the change of adduction moment according to the sort of knee joint osteoarthritis and the normal geriatrics as well. And we also require more effective, specific therapeutic program by making use of those background of researches.

• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.407-412
• /
• 1990

Morphological characters on the leaf nectar gland of Korean Prunus 4 species and 1 form were observed by SM. The results were summarized as follows ; The shapes of nectar gland on the plane figure were two, the circular and the irregular ovate. The species of circular shape were P. maackii, P. maximowiczii, P. sargentii and P. yedoensis. The irregular ovate shape was only one species, P. pendula for. ascendens. The shapes of nectar gland on the side figure were the reentrant apices and the rounded. The reentrant apices were two shapes. First, the species of the center reentrant was three, P. maackii, P. sargentii and P. yedoensis. Second, the species of the irregular reentrant was P. pendula for. ascendens. The rounded apex was only one species, P. maximowiczii. Especially on the P. pendula for. ascendens, the upheaval situation on surface of leaf blade was due to the sinking of reverse part of leaf blade at the nectar gland. The point of this abnormal shape was well distinguished from the other species. On the frequency by the part of leaf with nectar gland, the species to be observed only at the leaf base was P. pendula for. ascendens, the other species was observed two part of leaf base and petioles. In this study, some Prunus species were well keyed out on the basis of the morphological characters of leaf nectar gland.