• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.19-27
• /
• 2001

This paper is the first of 3 companion papers which investigate axial stratification process. In-cylinder fuel behavior has been investigated in the port injected SI engine by visualization for the purpose of understanding stratification. Planar laser light sheet from an Nd:YAG laser has been illuminated through the transparent quartz cylinder of the single cylinder optical engine and the Mie scattered light has been replaced with an air-ethanol mixture to utilize atomized fuel spray for the visualization purposes. This results have been compared with steady flow concentration measurement. For no swirl port, the axial penetration depends on the fuel injection timing. The fuel tends to remain in the upper region of the cylinder far from the spark plug and the distribution is not affected by the injection timing except 90 ATDC.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.2
• /
• pp.83-92
• /
• 1999

GaN etching was performed using planar inductively coupled $Cl_2$-based plasmas and the effects of main process parameters on the characteristics of the plasmas and their relations to GaN etch rates were studied. Also, the GaN etch mechanism was investigated using a Langmuir probe and optical emission spectroscopy (OES) during the etching, and X-ray photoelectron spectroscopy (XPS) of the etched surfaces. The GaN etch rates increased with the increase of chlorine radical density and ion energy, and a vertical etch profile haying the etch rate close to 4000 $\AA$/min could be obtained. The addition of 10% Ar to $Cl_2$ gas increased the GaN etch rate and the addition of Ar (more than 20%) and HBr generally reduced the GaN etch rate. The GaN etch rate appeared to be more affected by the chemical reaction between Cl radicals and GaN compared to the physical sputtering itself under the sufficient ion bombardments to break GaN bonds.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.101-102
• /
• 2000

The performance of ac plasma display panels (PDP) is influenced strongly by the surface glow discharge characteristics on the MgO thin films. This paper deals with the surface glow discharge characteristics and some physical properties of MgO thin films prepared by reactive RF planar unbalanced magnetron sputtering in connection with ac PDP. The samples prepared with the de bias voltage of -10V showed lower discharge voltage, lower erosion rate by ion bombardment, higher optic transparency and higher crack resistance in annealing process than those samples prepared by conventional magnetron sputtering or E-beam evaporation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.768-773
• /
• 2005

We present an overview of our new method of liquid crystal (LC) alignment based on the anisotropic etching of the alignment layers with a directed plasma flux. The method is realized by the use of anode layer source of "race track" geometry generating two "sheets" of accelerated plasma. These sheets are directed obliquely to the treated substrates. The static and dynamic irradiation regimes have been explored. The optimized processing conditions and materials are discussed. The technique yields an excellent uniformity of liquid crystal alignment of planar, tilted and vertical types. It is shown that the new method can be easily adapted for the alignment treatment of large area substrates used in the modern LCD manufacturing process.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2415-2417
• /
• 2002

In this paper, we discuss about the real-time distributed system for the control of to motors using uCOS-II kernel. Real-time kernel needs to process the tasks for two motors in desired time to synchronize motion. We used both semaphore and message mail box for synchronization. In the previous study, we used step motors for the actuator of two axes robot, but could not draw a clear line because of motor resolution and synchronizing step pulse. To resolve the problem we rebuilt the transfer robot with DC motors and the dedicated position servor which had built in out lab. Moreover we developed the PC based graphic user interface for generating planar drawing image control. Experimental results also presented to show the proposed control system is useful.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.211-214
• /
• 1996

This paper propose a method for pattern recogniton using spectrum analyzer and fuzzy ARTMAP. Contour sequences obtained from 2-D planar images represent the Euclidean distance between the centroid and all boundary pixels of the shape, and are related to the overall shape of the images. The Fourier transform of contour sequence and spectrum analyzer are used as a means of feature selection and data reduction. The three dimensional spectral feature vectors are extracted by spectrum analyzer from the FFT spectrum. These Spectral feature vectors are invariant to shape translation, rotation, and scale transformations. The fuzzy ARTMAP neural network which is combined with two fuzzy ART modules is trained and tested with these feature vectors. The experiments include 4 aircrafts and 4 industrial parts recognition process are presented to illustrate the high performance of this proposed method in the ion problems of noisv shapes.

• Journal of the Korean Ceramic Society
• /
• v.42 no.12 s.283
• /
• pp.865-871
• /
• 2005

Submicron thick solid electrolyte membrane is essential to the implementation of low temperature solid oxide fuel cell, and, therefore, development of new electrode structures is necessary for the submicron thick solid electrolyte deposition while providing functions as current collector and fuel transport channel. In this research, a nickel membrane with multi-stage nano hole array has been produced via modified two step replication process. The obtained membrane has practical size of 12mm diameter and $50{\mu}m$ thickness. The multi-stage nature provides 20nm pores on one side and 200nm on the other side. The 20nm side provides catalyst layer and $30\~40\%$ planar porosity was measured. The successful deposition of submicron thick yttria stabilized zirconia membrane on the substrate shows the possibility of achieving a low temperature solid oxide fuel cell.

• Carbon letters
• /
• v.15 no.1
• /
• pp.67-70
• /
• 2014

In this work, nanocomposites of epoxy resin and chemically reduced graphene oxide (RGO) were prepared by thermal curing process. X-ray diffractions confirmed the microstructural properties of RGO. Differential scanning calorimetry was used to evaluate the curing behaviors of RGO/epoxy nanocomposites with different RGO loading amounts. We investigated the effect of RGO loading amounts on the mechanical properties of the epoxy nanocomposites. It was found that the presence of RGO improved both flexural strength and modulus of the epoxy nanocomposites till the RGO loading reached 0.4 wt%, and then decreased. The optimum loading achieved about 24.5 and 25.7% improvements, respectively, compared to the neat-epoxy composites. The observed mechanical reinforcement might be an enhancement of mechanical interlocking between the epoxy matrix and RGO due to the unique planar structures.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.4
• /
• pp.355-360
• /
• 2010

In this study, a modeling process of a 3-axis planar alignment stage is suggested. Vibration tests using a laser vibro-meter is performed to find the modeling parameters of the stage. By analyzing the result of the test, the stiffness of prismatic joints and revolute joints, as well as the contact conditions of the thrust bearings, can be calculated. The modeling of the stage was validated by comparing six normal mode shapes, which are acquired from experiments and simulations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.623-624
• /
• 2009

Here we report a photo polymerization-induced hybrid alignment of a nematic liquid crystal cell which can be applied for a roll to roll fabrication process. Predominant polymerization in the vicinity of UV incident front induced a diffusion of monomers toward front slide and anisotropic polymer network was formed parallel to the polarization direction of the UV light. This induced planar alignment of liquid crystals at the front slide. Simultaneously, homeotropic alignment was induced at the bottom slide as the polymers are phase-separated from a bottom slide.