• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.112-119
• /
• 2021

This study proposes a design method of high-power-density and high-efficiency low-voltage DC-DC converters using SiC MOSFET and the optimized planar transformer design procedure based on the figure-of-merit. The secondary rectifying circuit of the phase-shifted full-bridge converter is compared to achieve high power density and high efficiency, and the phase-shifted full bridge converter with a current-doubler rectifier is selected. The planar transformer is designed by the proposed optimized design procedure and verified by FEA simulation. To validate the proposed design method, experimental results from a 3 kW prototype are provided. The prototype achieved 95.28% maximum efficiency and a power density of 2.98 kW/L.

• Journal of electromagnetic engineering and science
• /
• v.9 no.4
• /
• pp.188-193
• /
• 2009

A K-band low-power miniaturized planar-type hyperthermia system was developed to replace massive and expensive equipment. The system consists of a VCO with a buffer amplifier, a high-power amplifier module, a 20-dB-coupled line coupler, a chip circulator and two power detectors for signal generation, amplification and power monitoring. All these components have been implemented in planar form on two module blocks. The total size of the hyperthermia system was less than $10\times6.5\times3\;cm^3$. In order to verify the system performance, ablations were carried out on nude mice xenografted with human breast cancer. Ablation results show performance comparable to the massive components-based system. This work shows the feasibility of a low-cost miniaturized hyperthermia system for practical clinical applications.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.489-492
• /
• 2006

We demonstrate a beat frequency-Switchable dual-mode external cavity laser hybrid integrated on planar lightwave circuit with an FP-LD and a sampled grating as external reflector. The dual-mode external avity laser was able to switch its beat frequency from 132GHz to 406GHz by changing LD current from 50mA to 55mA.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.7
• /
• pp.552-557
• /
• 2012

In this study, we have coated the inner surface of YSZ channel using LSM powder ink through depressurization process for making the cathode of a stacked planar-type SOFC module. To coat the surface of YSZ channel uniformly, we tried to find the optimum manufacturing condition for LSM ink. We used four different dispersants (BYK series) and two different solvents (ethanol and DMF) to make the LSM ink. It was revealed that the ink made with the ethanol solvent and the BYK-111 dispersant has the lowest viscosity, relatively low contact angle and most excellent dispersibility. After depressurizing a chamber filled with LSM ink and sintered YSZ channel, we have found that the YSZ channel was uniformly coated with LSM cathode. The LSM ink with 25 vol% BYK-111 showed the most uniform coating.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.768-772
• /
• 2007

Integration of RF front end module(FEM) into the antenna has been investigated in USPCS band (1.88GHz-1.99GHz). The FEM consists of input filter, power amplifier, coupler, power detector, bias switch and duplexer. The antenna was designed in planar inverted F antenna(PIFA) structure to implement it inside the handset. In order to avoid strong coupling between the antenna and FEM, a shielding ground layer was placed between them. The antenna size is 19mm by 10mm by 6mm under which FEM whose size is 8mm by 5mm by 1.5m locates. The antenna impedance was selected to match to FEM having better efficiency rather than gain since FEM has enough gain whose system spec is minimum of 20dB. The antenna patterns are shown with and without FEM.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.265-266
• /
• 2008

The environmental and mechanical reliability of planar lightwave circuit (PLC)-type optical splitter modules is investigated with references [1, 3]. The module is composed of Y-branching silica-based waveguides on Si connected to optical fiber with UV-curable adhesives and is packaged in a metal case which is filled with humidity-resistant resin. High optical performance such as low loss, low reflection, and thermal stability are obtained through the use of this fiber connection technique. Ten reliability tests including long-term environmental and mechanical and ALT test were carried out for more then ten $1{\times}32$ channel PLC splitter modules.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.189-192
• /
• 2006

본 논문에서는 안테나와 미국 PCS대역(1.85GHz-1.99GHz) FEM(Front End Module)을 결합하여 하나의 패키지로 구현하는 것을 연구하였다. FEM의 크기를 고려하여 안테나의 크기를 작게 만들고 단말기에 내장하기 위해 PIFA(Planar Inverted F Antenna)형식의 안테나를 선택하였다. 안테나의 지지를 위해 비유전율 2의 캐리어를 사용하였고, 안테나와 FEM간의 상호 간섭을 막기 위해 도체로 차폐시켰다. 유한요소법(Finite Element Method)로 모의 실험을 하여 안테나를 설계하고 실제 제작하여 모의 실험결과와 비교하였다. 제작한 안테나를 FEM과 결합, 기판을 제작하여 FEM의 이득을 측정하였다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.358-361
• /
• 2002

The millirneterwave high-T$_{c}$ superconducting(HTS) down-converter sub-system with the HTS/III-V integrated mixer as the central device is demonstrated first. The constituent components of HTS down-converter sub-system such as a single balanced type integrated mixer with rat-race coupler, a cavity type bandpass filter (26 GHz), and a HTS planar lowpass filter(1 GHz), semiconductor LNA and IF-power amplifier, a driving electronic module for A/D converter, and a Stirling type mini-cooler module were combined into an International stand- and rack of 19-inch. From the RF(-61 dBm, 26.5GHz)and LO signal(-1 dBm, 25.6 GHz), IF signal(0dBm, 0.9 GHz) agreed with simulated results is obtained.d.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.181-192
• /
• 1995

In this study, we introduce new types of planar 2 degree-of-freedom robot modules resembling the musculoskeletal structure of the human arm with actuation redundancy. First, for the given actuator sizes the performance analysis for the manipulator with redundant actuation and without redundant actuation is performed with respect to maximum load handling capacity, maximum hand velocity, and maximum hand acceleration. Secondly an algorithm which decides optimal actuator sizes for the given operational performances is introduced, and the optimal actuator sizes for a robot module with four redundant actuation are obtained. The algorithms employed in this paper will be useful to analyze the robot performances and to determine the actuator sizes for general robot manipulators.

• Communications of the Korean Mathematical Society
• /
• v.34 no.1
• /
• pp.105-111
• /
• 2019

Let $Y{\subset}{\mathbb{P}}^3$ be a degree d reduced curve with only planar singularities. We prove that $h^i({\mathcal{I}}_Y(t))=0$, i = 1, 2, for all $t{\geq}d-2$. We use this result and linkage to construct some triples (d, g, s), $d>s^2$, with very large g for which there is a smooth and connected curve of degree d and genus g, $h^0({\mathcal{I}}_C(s))=1$ and describe the Hartshorne-Rao module of C.