• 제목/요약/키워드: Planar Waveguide

검색결과 221건 처리시간 0.042초

FHD(Flame Hydrolysis Deposition)법으로 제작된 광도파막용 실리카 soot의 분광학적 분석 (Spectroscopic Analysis of Silica Soot for Planar Waveguide by FHD(Flame Hydrolysis Deposition) Method)

  • 류형래;김재선;신동욱
    • 한국세라믹학회지
    • /
    • 제38권1호
    • /
    • pp.74-83
    • /
    • 2001
  • FHD(Flame Hydrolysis Deposition) 공정은 광통신에서 사용되는 수동형 집적광학소자를 제작하는 공정으로서, SiCl$_4$를 형성하는 방법이다. 이 FHD 공정은 화염 형성에 관여하는 장비의 조건에 따른 매우 다양한 공정인자에 의하여 박막의 조성이 결정되므로, 박막의 조성을 예측하는 것이 용이하지 않았다. 본 연구에서는 FHD 공정에서 첨가가스의 유량을 제어하여 박막의 조성 및 광학적 특성을 예측할 수 있는 공정 분석의 기초자료를 제공하기 위하여 FTIR과 ICP-AES를 이용하여 실리카 soot의 조성분석에 대한 연구를 수행하였다. FTIR 흡수스펙트럼을 통해 실리카 soot에 존재하는 Si-O, B-O, OH($H_2O$) 농도의 변화를 관찰할 수 있었으며, ICP-AES를 통해 B-O의 흡수스펙트럼의 변화를 B의 농도와 정량적으로 연관지을 수 있었다.

  • PDF

확산방식에 의한 Ti:LiNbO_3$ 광도파로의 제작 및 특성측정 (Fabrication and Characterization of Ti:LiNbO_3$ Optical Waveguides)

  • 손영성;강원구;갑상영;권영세
    • 대한전자공학회논문지
    • /
    • 제25권3호
    • /
    • pp.343-351
    • /
    • 1988
  • Planar optical waveguides are fabricated on a Y-cut LiNbO3 single crystal substrate by Ti indiffusion method. From data measured by the bright M-line spectroscopy, refractive index profiles are reconstructed by WKB approximation method. Then, single strip, X-crossing strip, and Y-brinch strip optical waveguides are fabricated on X-cut LiNbO3 single crystal substrate, with waveguide patterns made by the laser beam direct writing method. And their near-field intensity profiles are observed after coupling the light to the waveguide edges.

  • PDF

A SIW Fed Antipodal Linear Tapered Slot Planar Multi-Beam Antenna for Millimeter-Wave Application

  • Zhang, Yingsong;Hong, Wei;Kuai, Zhenqi
    • Journal of electromagnetic engineering and science
    • /
    • 제10권3호
    • /
    • pp.175-178
    • /
    • 2010
  • In this paper, a millimeter-wave multi-beam antenna is studied by rotating the antipodal linear tapered slot antenna(ALTSA) with respect to a center is successfully designed. In order to lowering the SLL and enhancing the isolation between the ALTSA elements, a row of metallic via is inserted between the ALTSAs. A 9 beams antenna is designed and experimented at Ka band. The measured and simulated results agree well with each other. The antenna can provide horizontal wide angle coverage up to ${\pm}62^{\circ}$. The gain of each beam can achieve about 12.5 dB. The mutual coupling between ports is all below 20 dB.

Design of Planar-Type Modified Folded Loop Antennas

  • Park, Sung-Il
    • Journal of information and communication convergence engineering
    • /
    • 제8권5호
    • /
    • pp.489-492
    • /
    • 2010
  • This paper proposes the planar-type modified monopole antennas of loop structure. This antenna has an opened center of a conventional closed loop structure with an inside-folded terminal of the loop microstrip line. The size of the proposed antenna was minimized by folding the end of the loop. Also, the reactance value has been minimized by increasing capacitances between the coupled microstrip line. Therefore the proposed antenna has been compacted to about 20% from a conventional loop antenna and has increased its efficiency. The proposed antennas have an omni-directional pattern, the antenna gain was 3.67 [dBi] and the bandwidth was 900 MHz (2.6~3.56 GHz) with VSWR$\leq$2 from the simulated and the measured results. The frequency utilization coefficient was 29.9%. These properties could satisfy the S-DMB band.

위성 DMB 대역을 위한 수정된 폴디드 루프 안테나 (Design of Planar Modified Folded Loop Antennas for S-DMB band)

  • 이현진
    • 전기학회논문지P
    • /
    • 제61권1호
    • /
    • pp.1-4
    • /
    • 2012
  • In this paper, the planar type modified folded loop antennas for S-DMB band is proposed. The proposed antenna consisted of opened center of a conventional closed loop and folded terminal of microstrip line to inside loop antenna. The sizes proposed antenna was minimized by folding the terminal of the loop. Also, It was minimized reactance value by increasing capacitances between coupled microstrip line. Therefore the proposed antennas compacted about 20% than a conventional loop antenna and increased efficiency of antenna. The proposed antennas got an omni-directional pattern, the antenna gain was 3.67 [dBi] and the bandwidth was 900 MHz (2.6-3.56 GHz) with VSWR${\leq}$2 from the simulated and the measured results. The frequency utilization coefficient was 29.9 %. These properties could satisfy the S-DMB band.

평판 도파로에서의 체렌코프 펌프 형태에 의한 광 매개증폭 (Optical Parametric Amplification in Cerenkov-pump Configuration in a Planar Waveguide)

  • 서정식
    • 한국광학회지
    • /
    • 제25권1호
    • /
    • pp.44-49
    • /
    • 2014
  • 평판 도파로에서 pump가 체렌코프 복사(Cerenkov radiation)의 파동인 경우, pump, signal, 그리고 idler 사이의 매개적 상호작용에 의한 signal의 증폭현상을 해석하였다. 결합모드 이론을 사용하여 pump의 고갈(depletion)을 무시할 수 있는 경우, 수치적 계산으로 쉽게 풀 수 있는 1차 결합모드 미분방정식을 유도하였다. 이 미분방정식의 근사해와 수치적 계산 예를 통해서 signal이 매개적으로 증폭될 수 있음을 보였다.

An RFID Tag Using a Planar Inverted-F Antenna Capable of Being Stuck to Metallic Objects

  • Choi, Won-Kyu;Son, Hae-Won;Bae, Ji-Hoon;Choi, Gil-Young;Pyo, Cheol-Sig;Chae, Jong-Suk
    • ETRI Journal
    • /
    • 제28권2호
    • /
    • pp.216-218
    • /
    • 2006
  • This letter presents the design for a low-profile planar inverted-F antenna (PIFA) that can be stuck to metallic objects to create a passive radio frequency identification (RFID) tag in the UHF band. The designed PIFA, which uses a dielectric substrate for the antenna, consists of a U-slot patch for size reduction, several shorting pins, and a coplanar waveguide feeding structure to easily integrate with an RFID chip. The impedance bandwidth and maximum gain of the tag antenna are about 0.3% at 914 MHz for a voltage standing wave ratio (VSWR) of less than 2 and 3.6 dBi, respectively. The maximum read range is about 4.5 m as long as the tag antenna is on a metallic object.

  • PDF

평면도파로형 광증폭기 제작을 위한 $Er^+$이 첨가된 $SiO_2$ 박막 특성 (The Characteristics $Er^+$ Doped $SiO_2$ Thin Film for the Fabrication of the Planar Light Waveguide Amplifier)

  • 최영복;문동찬
    • 한국전기전자재료학회논문지
    • /
    • 제11권9호
    • /
    • pp.739-745
    • /
    • 1998
  • The objective of this paper is to provide experimental data of Er(rare- earth)doped $SiO_2$thin film made by sputtering methods. The deposition rate of silica glass by sputtering method was 55$\AA$/min. In EDD measurements, the average Er concentration in the deposited film was 0.77(wt%). After annealing at $900^{\circ}C$, the Cl concentration decreased from 3.79(wt%) to 1.52(wt%). The refractive indices of the core $n_1$, cladding $n_2$ were 1.458, 1.558 respectively at 632.8 nm. The refractive index difference between core and cladding, $\Delta$n was 0.1. The refractive index profile of core and cladding interface shows step profile. In the study, $SiO_2$ glass films of Si wafer were successfully doped with active erbium. Therefore, this experimental data will be applicable for fabrications of Er doped planar integrated optical device.

  • PDF

열광학 효과를 이용한 광섬유 -평면도파로 결합형 파장 가변 빗살필터 (Fiber to planar waveguide type tunable comb filter using thermo-optic effect)

  • 김정훈;권광희;김광택;송재원
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2002년도 하계학술발표회
    • /
    • pp.192-193
    • /
    • 2002
  • 지금까지 측면이 코어 가까이 연마된 잔일모드 광섬유와 평면 도파로 사이의 광결합을 이용한 소자들이 많이 연구되고 있다. 이를 이용한 소자들로는 광필터, 광변조기, 광스위치, 굴절계, 편광기 등이 있으며 최근에는 파장분할다중화(WDM)에서 인접채널간의 채널분리를 위한 소자로서 빗살필터의 연구 또한 활발히 이루어지고 있다. 이에 본 논문에서는 측면이 코어 가까이 연마된 단일모드 광섬유와 평면도파로 사이의 광결합을 이용한 빗살필터를 제작하였으며 열광학 효과를 이용하여 파장 가변 빗살 필터를 구현해 보았다. (중략)

  • PDF