• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.173-173
• /
• 2010

Recently, a patterned sapphire substrate (PSS) has been intensively used as one of the effective ways to reduce the dislocation density for the III-nitride epitaxial layers aiming for the application of high-performance, especially high-brightness, light-emitting diodes (LEDs). In this paper, we analyze the growth kinetics of the atoms and crystalline quality for the undopped-GaN depending on the facets of the pattern fabricated on a sapphire substrate. The effects of the PSS on the device characteristics of InGaN/GaN LEDs were also investigated. Several GaN samples were grown on the PSS under the different growth conditions. And the undoped-GaN layer was grown on a planar sapphire substrate as a reference. For the (002) plane of the undoped-GaN layer, as an example, the line-width broadening of the x-ray diffraction (XRD) spectrum on a planar sapphire substrate is 216.0 arcsec which is significantly narrower than that of 277.2 arcsec for the PSS. However, the line-width broadening for the (102) plane on the planar sapphire substrate (363.6 arcsec) is larger than that for the PSS (309.6 arcsec). Even though the growth parameters such as growth temperature, growth time, and pressure were systematically changed, this kind of trend in the line-width broadening of XRD spectrum was similar. The emission wavelength of the undoped-GaN layer on the PSS was red-shifted by 5.7 nm from that of the conventional LEDs (364.1 nm) under the same growth conditions. In addition, the intensity for the GaN layer on the PSS was three times larger than that of the planar case. The spatial variation in the emission wavelength of the undoped-GaN layer on the PSS was statistically ${\pm}0.5\;nm$ obtained from the photoluminescence mapping results throughout the whole wafer. These results will be discussed in terms of the mixed dislocation depending on the facets and the period of the patterns.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.262-265
• /
• 1998

Nickel Plating improves on the corrosion resistance of materials in acid and moisture environment. In this study, we investigated the surface morphology, XRD patterns and pole figures of the various types of Ni electrodeposits. The texture of Ni electrodeposits changed from <100> to <111> through <110> with increasing the temperature of electrolyte and the concentration of nickel ion. The texture of Ni electrodeposits changed from <100> to <100> after annealing. Also the <110> texture changed to the <√310> texture after annealing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.101-104
• /
• 1996

A new detecting system for moving objects of coastal region has been designed by directional antenna and driving circuits. The designed system has been investigated by CAD for linear and planar antenna arrays of various radiating elements for antenna simulations and by P-spice of device simulations. For detecting the displacement of moving objects, we constructed four wideband dipole antenna, diode switching circuit, mixer, filter and amplifier. The results of antenna receiver were shown a possibility of distance measuring system through phase difference of radiation patterns in antenna simulation

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2704-2710
• /
• 2014

Catalase (CAT) decomposes hydrogen peroxide that is toxic to the body. In this study, simple and sensitive detector has been developed for observing catalase activity using liquid crystal droplet system. Microscale LC droplet patterns are formed by spreading aldehyde-doped nematic liquid crystal on pre-treated glass slides. When hydrogen peroxide is added, aldehyde is oxidized and amphiphiles are formed. Dodecanoates cause the pattern to transit from bright to dark as they self-assemble to form a carboxyalte monolayer at the interface. When a drop of pre-incubated CAT and hydrogen peroxide mixture is placed onto the pattern, bright fan-shape is observed. This planar optical appearance indicates that catalase has decomposed hydrogen peroxide. Compared to the detectors that have been previously developed, this system is more sensitive with detection limit of 1fM. This research suggests further studies to be on LC droplet patterning to develop highly sensitive and methodologically simple sensors for various chemicals.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1065-1068
• /
• 2003

The nano imprint process is one of the next generation lithography has been mentioned as one of major nanoreplication techniques because it is simple process, low cost, high replication fidelity and relatively high throughput. This process requires a surface contact between a template with patterns and a wafer on a stage. After contact, the vertical moving the template to the wafer causes some directional motions of the stage. Thus the stage must move according to the motions of the template to avoid the damage of the transferred patterns on the wafer. This study is to develop the wafer stage with a passive compliance to overcome the damage. This stage is designed with the concept like that it has a monolithic, symmetry and planar 6-DOF mechanism.

• 한국전자파학회논문지
• /
• 제16권1호
• /
• pp.84-91
• /
• 2005

본 논문에서는 PIFA(Planar Inverted F Antenna)의 방사부에 H형 슬릿을 부가하여 이중대 역 휴대이동전화기의 안테나 특성에 관하여 연구하였다. 안테나 방사부에 위치한 슬릿의 형태에 의하여 안테나의 임피던스의 리액턴스 성분에 영향과 공진 메카니즘을 변형함으로써 안테나의 공진특성에 영향을 준다. 그러므로 안테나는 이중대역(셀룰라 대역, 한국형 PCS 대역)에서 공진하며, 슬릿의 길이와 모양에 의해서 안테나의 대역폭, 입력 임피던스, 방사패턴 등에 영향을 미친다. 따라서 본 논문에서 제시한 이론의 타당성 및 객관성을 증명하기 위해서 H형의 슬릿을 이용하여 4종류의 안테나를 제작하여 실험한 결과 반사손실의 -5 dB 대역폭은 셀룰라 대역과 한국형 PCS 대역을 만족하였고, 안테나 이득은 약 -8$\~$-1 dB이며, x, y 편파에 대한 방사패턴은 대체적으로 전방향 방사패턴을 형성하였다. 따라서 본 논문의 결과를 이용함으로써 단말기용 내장용 안테나로 사용할 수 있음을 확인하였다.

• 한국음향학회지
• /
• 제37권1호
• /
• pp.53-59
• /
• 2018

본 연구에서는 수중 희소배열 센서의 구조를 최적설계하기 위한 새로운 방안을 개발하였다. 본 연구의 목적은 전체 배열센서와 대등한 성능을 가지는 희소 배열센서의 구조를 설계하는 것이다. 우선 희소 평면배열 센서의 지향계수를 배열 구조변수들의 함수로 유도하였다. 유도된 식을 사용하여 희소 배열센서 구성 소자의 개수와 위치를 최적화함으로써 그 성능이 전체 배열 센서의 성능과 대등하도록 희소배열 센서의 구조를 설계하였다. 설계된 희소 배열센서는 최대 부엽 레벨과 주엽의 빔폭 면에서 전체 배열 센서와 대등한 빔 패턴을 보였는데, 이로써 본 연구의 최적설계 기법의 효용성이 확인되었다. 나아가 수식에 의한 빔 패턴 해석 결과의 타당성은 최적화된 희소배열 구조에 대한 유한요소해석 결과와 비교함으로써 검증하였다.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.77-84
• /
• 2013

In this paper, we review two-dimensional measuring methods referring to target patterns. The patterns consist of two linearly-repeated patterns or is designed repeatedly in two-dimension. The repeated properties are reflectivity, refractivity, air-gapping distance, capacitance, magnetic reluctance, electrical resistance and sloping gradient, etc. However, the optical methods are generally used for high speed processing and density, and their encoding principles are treated here. In case of two-dimensional pattern, as there is not inherently error between single units encoding the pattern except for the metrology frame errors, the end-effector position of an object accompanying the pattern can be measured with respect of the global frame without via error. Therefore, it is regarded as a substitute for laser interferometer with severe environmental constraints and has been applied to the high-accurate planar actuator.

• 한국BIM학회 논문집
• /
• 제11권4호
• /
• pp.42-52
• /
• 2021

Paneling building facades is one of the essential procedures in building construction. Traditionally, it has been an easy task of simply projecting paneling patterns drawn in drawing boards onto 3d building facades. However, as many organic or curved building shapes are designed and constructed in modern architectural practices, the traditional one-to-one projection is becoming obsolete for the building types of the kind. That is primarily because of the geometrical discrepancies between 2d drawing boards and 3d curved building surfaces. In addition, curved compound surfaces are often utilized to accommodate the complicated spatial programs, building codes, and zoning regulations or to achieve harmonious geometrical relationships with neighboring buildings in highly developed urban contexts. The use of the compound surface apparently makes the traditional paneling pattern projection more challenging. Various mapping technics have been introduced to deal with the inabilities of the projection methods for curved facades. The mapping methods translate geometries on a 2d surface into a 3d building façade at the same topological locations rather than relying on Euclidean or Affine projection. However, due to the intrinsic differences of the planar 2d and curved 3d surfaces, the mapping often comes with noticeable distortions of the paneling patterns. Thus, this paper proposes a practical method of drawing paneling patterns directly on a curved compound surface utilizing Geodesic, which is faithful to any curved surface, to minimize unnecessary distortions.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2247-2254
• /
• 2010

The surface structures of copper phthalocyanine (CuPc) thin films deposited on sulphur-passivated and plane perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA)-covered InAs(100) surfaces have been studied by low energy electron diffraction (LEED) and van der Waals (vdW) intermolecular interaction energy calculations. The annealing to $300^{\circ}C$ and $450^{\circ}C$ of $(NH_4)_2S_x$-treated InAs(100) substrates produces a ($1{\times}1$) and ($2{\times}1$) S-passivated surface respectively. The CuPc deposition onto the PTCDA-covered InAs(100) surface leads to a ring-like diffraction pattern, indicating that the 2D ordered overlayer exists and the structure is dominantly determined by the intermolecular interactions rather than substrate-molecule interactions. However, no ordered LEED patterns were observed for the CuPc on S-passivated InAs(100) surface. The intermolecular interaction energy calculations have been carried out to rationalise this structural difference. In the case of CuPc unit cells on PTCDA layer, the planar layered CuPc structure is more stable than the $\alpha$-herringbone structure, consistent with the experimental LEED results. For CuPc unit cells on a S-($1{\times}1$) layer, however, the $\alpha$-herringbone structure is more stable than the planar layered structure, consistent with the absence of diffraction pattern. The results show that the lattice structure during the initial stages of thin film growth is influenced strongly by the intermolecular interactions at the interface.