• Journal of Embryo Transfer
• /
• v.13 no.2
• /
• pp.179-190
• /
• 1998

Prolactin (PRL) surge in cycling rats at proestrous afternoon has previously been reported as an inducer of apoptotic cell death of luteal cells. This death-inducing action of PRL seeins unusual, because PRL can he categorized as a cell-survival factor, if other known physiological functions of PRL are taken into account. In this study, the apoptotic action of PRL was assessed in cultured cells prepared from rat luteal tissue and underlying molecular /cellular mechanism of PRL-induced luteolysis was analyzed. The latest crop of corpora lutea (CLs) were enucleated from rat ovaries at 18:00 h on the proestrous day before the next ovulation. Donor rats were pretreated with CB154, a dopamine agonist, in order to he exempted from the endogenous PRL surge. The harvested GLs were dispersed and cultured with or without PRL (2$\mu$g /ml) for 24 or 48 h. An addition of PRL to the culture medium changed the parameters indicative of cell death via apoptosis: a decrease in cell viability (MTT) and an increase in chromatin condensation. Most of the DNA breakdown in nuclei induced by PRL occurred in steroidogenic cells which were identified by 3$\beta$-HSD activity staining, and the number of 3$\beta$-HSD-positivecells were significantly decreased. Interestingly, most of the cells with an apoptotic nucleus adhered to one or more intact and seemingly non-steroidogenic cells. Because the expression of Fas has heen shown to be abundant in murine ovary, and Fas is known to have an exact physiological role in occurrence of apoptotic cell death, the membrane form-Fas ligand (rnFasL) was quantified in the cell lysate. An addition of PRL increased expression of mFasL. Moreover, an addition of concanavalin A (ConA), a T-cell specific activator, in place of PRL, enhanced the apoptotic parameters. Cumulatively, the apoptotic PRL action was addressed to cells unknown than steroidogenic lute~ cells. The most prohable candidate for the direct target cells is Tcells in the luteal tissue that can express mFasL in response to PRL.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.19 no.2
• /
• pp.199-213
• /
• 2006

Purpose : This study was aimed to investigate the inhibitory effect of Sparganii Rhizoma on the proliferation of human uterine leiomyoma cells and the expression of gene related the mechanism of cell apoptosis. Methods : This study was evaluated the number of death cells treated with indicated concentration of Sparganii Rhizoma and investigated cell death rate by MTS assay. Furthermore, fluorescence-activated cell sorter analysis and DNA fragmentation assay were used to dissect between necrosis and apoptosis. and then we observed the differential gene expression by western blot analysis. Results :1) The inhibitory effect on the growth of uterine leiomyoma cell treated with Sparganii Rhizoma was increased in a dose dependent manner. 2) As the result of FACS analysis, subG1 phase incrase was observed 23.49% inuterine leiomyoma cell treated with Sparganii Rhizoma at $500\;{\mu}g/ml$ compared to control.. 3) The gene expression of p53, p21 related cell apoptosis was increased according to increasing concentration but p27 was none exchanged. 4) The expression of cyclin A, D and E was decreased in a concentration proportional and then the dephosphorylation of pRb was increased. 5) The character of apoptosis, DNA fragmentation was significantly observed according to increasing concentration. 6) The expression of pro-caspase3 were decreased dependent on treatment concentration and activated PARP took place. Conclusion : The inhibitory effect of Sparganii Rhizoma on the proliferation of human uterine leiomyoma cells was observed with apoptosis and cell cycle arrest. These data suggest that Sparganii Rhizoma might be candidate of medical therapy for uterine leiomyoma.

• Journal of Integrative Natural Science
• /
• v.7 no.3
• /
• pp.208-213
• /
• 2014

National-wide and/or large scale sample surveys generally use complex sample design. Traditional Pearson chi-square test is not appropriate for the categorical complex sample data. Rao-Scott suggested an adjustment method for Pearson chi-square test, which uses the average of eigenvalues of design matrix of cell probabilities. This study is to compare the efficiency of Rao-Scott first order adjusted test to Wald test for homogeneity between two populations using 2009 Gyeongnam regional education offices's customer satisfaction survey (2009 GREOCSS) data. The 2009 GREOCSS data were collected based on stratified three-stage cluster sampling with probability proportional to size. The empirical results show that the Rao-Scott adjusted test statistic using only the variances of cell probabilities is very close to the Wald test statistic, which uses the covariance matrix of cell probabilities, under the 2009 GREOCSS data based. However it is necessary to be cautious to use the Rao-Scott first order adjusted test statistic in the place of Wald test because its efficiency is decreasing as the relative variance of eigenvalues of the design matrix of cell probabilities is increasing, specially more when the number of degrees of freedom is small.

• BMB Reports
• /
• v.36 no.4
• /
• pp.390-398
• /
• 2003

The CDP/Cux transcription factor was previously shown to be proteolytically processed at the G1/S transition. In view of characterizing and eventually identifying the protease responsible for CDP/Cux processing, we have established an in vitro proteolytic processing assay. CDP/Cux recombinant proteins expressed in mammalian or bacterial cells were efficiently processed in vitro using as a source of protease either whole cell extracts, the nuclear or the cytoplasmic fraction. Processing was found to take place optimally at a lower pH, to be insensitive to variations in salt concentration, and to be inhibited by the protease inhibitors MG132 and E64D. Interestingly, the bacterially-produced substrate was more efficiently processed than the substrate purified from mammalian cells. Moreover, processing in vitro was more efficient when CDP/Cux substrates were purified from populations of cells enriched in the S phase than in the G1 phase of the cell cycle. Altogether, these results suggest that post-translational modifications of CDP/Cux in mammalian cells inhibits processing and contributes to the cell cycle-dependent regulation of processing. The in vitro processing assay described in this study will provide a useful tool for the purification and identification of the protease responsible for the processing of CDP/Cux.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.5
• /
• pp.678-685
• /
• 2011

An Ejector enhances system efficiency, are easily operated, have a mechanically simple structure, and do not require a power supply. Because of these advantages, the ejector has been applied to a variety of industrial fields such as refrigerators, power plants and oil plants. In this work, an ejector was used to safely recycle anode tail gas in a 75-kW Molten Carbonate Fuel Cell (MCFC) system at KEPCO Research Institute. In this system, the ejector is placed at mixing point between the anode tail gas and the cathode tail gas or the fresh air. Commercial ejectors are not designed for the actual operating conditions for our fuel cell system. A new ejector was therefore designed for use beyond conventional operating limits. In the first place, a few sample ejectors were manufacured and the entrainment ratio was measured at a dummy stack. Through this experiment, the optimum ejector was chosen. The 75-kW MCFC system equipped with this optimum ejector was operated successfully.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.277-279
• /
• 2005

The imbalance of energy demand and supply caused by rapid industrialization around the world and the associated environmental issues require and alternative energy source with possible renewable fuels. Political instability and depletion of cruel oils are other factors that cause fluctuation of oil price. Securing a new alternative energy source for the next century became an urgent issue that our nation is confronting with. As a matter of fact, the fuel cell technology can be widely used as next generation energy regardless of regions and climate. Specially, the ability of expansion and quick installation enable one to apply it for distributed power, where the technology is already gaining remarkable attentions for the application. Particularly, leading industrialized nations are focusing on the PEM fuel dell with anticipation that this technology will find their place of applications in the vehicles and homes. In this study, demonstrate the multi physics modeling of a proton exchange membrane(PEM) fuel cell with interdigitated flow field design. The model uses current balances, mass balance(Maxwell-Stefan diffusion for reactant, water and nitrogen gas) and momentum balance(gas flow) to simulate the PEM fuel cell behavior.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.554-563
• /
• 2014

The burgeoning growth of real-time applications, such as interactive video and VoIP, places a heavy demand for a high data rate and guarantee of QoS from a network. This is being addressed by fourth generation networks such as Long-Term Evolution (LTE). But, the mobility of user equipment that needs to be handed over to a new evolved node base-station (eNB) while maintaining connectivity with high data rates poses a significant challenge that needs to be addressed. Handover (HO) normally takes place at cell borders, which normally suffers high interference. This inter-cell interference (ICI) can affect HO procedures, as well as reduce throughput. In this paper, soft frequency reuse (SFR) and multiple preparations (MP), so-called SFRAMP, are proposed to provide a seamless and fast handover with high throughput by keeping the ICI low. Simulation results using LTE-Sim show that the outage probability and delay are reduced by 24.4% and 11.9%, respectively, over the hard handover method - quite a significant result.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.7.1-7.1
• /
• 2009

The use of Duplex stainless steel as a thermo-implant categorizes into two clinical applications: hyperthermia and thermal ablation or destruction. The goal of hyperthermia is to destroy the heat-sensitive abnormal cells and minimize normal cell death maintaining heat between $42^{\circ}C$ and $46^{\circ}C$. Thermal ablation takes place when the local tissue temperature increases greater than $46^{\circ}C$. This elevated temperature denatures protein irreversibly resulting cellular death. The author introduced several thermo-implants such as thermo-rod, thermo-stent, thermo-coil and thermoacupuncture-needle. Those thermo-implants are made of duplex stainless steel which can produce regulated heat by itself within an induction magnetic field. Thermal ablation characteristics of the thermo-rod on tumor hyperthermia depend on configurations of the thermo-rods and the magnitude of the induction magnetic strength. The exothermic properties of the thermo-implants can be characterized using the calorimetric test and the heat affected zone(HAZ) analyses in vitro. Thermal radiation studies using thermo-coils and thermo-stents show the capability of the occlusion of animal blood vessels and inhibiting the proliferation of the abnormal smooth muscle cell growth and inflammatory cell reactions maintaining the heat between $42^{\circ}C$ and $46^{\circ}C$ minimizing a normal cell death in the study on external iliac artery of the New Zealand White (NZW) rabbit. Thermal stimulation study using thermo-acupuncture needles suggests the potential applications of the automated acupunctural therapies.

• Korean Journal of Animal Reproduction
• /
• v.27 no.1
• /
• pp.35-44
• /
• 2003

The present study was performed to investigate the first polar body(PB) extrusion during in-vitro maturation(IVM) and to examine the effect of different maturation time on the embryo development of Korean Native Cows(KNC) with regard to blastocyst(BL) cell numbers and pregnancy rates. PB extrusion did not take place for the first 12 hours(hr) of IVM, and most of KNC oocytes extruded PB from 14 to 20 hr after the onset of maturation. There was no significant difference in cleavage and 8-cell stage rates among the treatment groups, but BL and BL/8-cell rates were significantly higher(P<0.05) in 18 hr maturation group(31.0$\pm$5.7 and 82.0$\pm$5.1%) than 22 and 24 hr maturation group. The proportion of BL formed on day 7 and 8 was significantly higher(P<0.05) in 18 hr maturation group(85%) than in 24 hr maturation group(55%). There was a significant difference(P<0.05) in inner cell mass, trophectoderm and total cell number between day 7 BL produced by in-vivo and IVM 18 hr and day 8 BL produced by IVM 18 hr and 24 hr. Pregnancy rates are also significantly higher(P<0.05) in in-vivo(56.3%) and IVM 18 hr day 7(50.0%) group than day 8 treatment groups(18 hr: 16.7%, 24 hr: 10.5%). These results suggest that KNC oocytes achieve developmental competency within 20 hr of IVM, and "short" IVM (18 hr) is more effective than "long" IVM(24 hr) in embryo development rates, BL cell numbers and pregnancy rates.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.85.2-85.2
• /
• 2010

There is widespread effort to develop polymer membranes in place of Nafion for high temperature polymer electrolyte membrane fuel cell(PEMFC). In our study, SiO2 membranes are arranged by electrospinning method. For impregnation solution, the modified sulfonated poly(ether ether ketone)(SPEEK) polymer is prepared from sulfonation, sulfochlorination, partial reduction and lithiation reaction. The modified polymer is cross-linked with 1,4-diiodobetane in NMP solvent and then blended with Heteropoly acid(HPA). The characterization of membranes is confimed by FT-IR, Thermogravimetry(TGA), water uptake test and single cell performance test for PEMFC, etc. The composite membrane shows satisfactory thermal and mechanical properties. Beside, The membrane exhibits good ion exchange capacity and high proton conductivity. As a result, The composite membrane is promising as an alternative membrane in high temperature PEMFC.