• 중국학논총
• /
• 제70호
• /
• pp.239-260
• /
• 2021

In this paper, a total of 4413 place names are collected to analyze the origin and structure of place names from the two categories of nature and humanity. In this collection, there are slightly more natural place-names than humanistic ones, and hydrological ones account for the largest proportion of natural place-names, reflecting the geographical characteristics of Leizhou Peninsula surrounded by sea on three sides. Most of the place names handed down from the feudal period were natural ones. In addition, most of the place names produced after the founding of the People's Republic of China are mainly humanistic place names. In the phonetic aspect of place names, there are still quite a few ancient Vietnamese place names that can be remembered because of oral transmission. With the progress of cultural and economic development, the further development of place names will be dominated by humanistic place names.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 1999년도 제3회 전자장의 생체영향에 관한 워크숍
• /
• pp.156-164
• /
• 1999

This paper shows that the configuration of power transmission lines currently in place is suitable on the basis of calculated magnetic field strengths. The magnetic fields were computed for typical current distributions on power transmission lines for electric railways, which are characterized by severe load fluctuations and phase distortions. The result of the numerical analysis are compared with th ELF guidelines of magnetic fields from several case studies. The final conclusion reached in that effects of the magnetic fields near power transmission lines for electric railways are not significant enough to cause a biological safety concern.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.690-692
• /
• 2014

To identify characterization of a simple extension chamber that have the two internal partition, produce the curve to estimate the transmission loss without the computer analysis. For helpful for internal optimum design, identify the characteristic of internal partition on transmission loss. Made estimated transmission loss curve by function of relationship of internal partition and transmission. Check the similarity of predicted transmission loss and analysis transmission loss. Usage of the predicted transmission loss made by relationship of internal partition and transmission loss is good information to place the internal partition so as to maximize the transmission loss on target frequency at optimal design on muffler.

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2638-2647
• /
• 2010

긴 preamble을 사용하는 비동기식 MAC 프로토콜의 문제점을 개선하기 위해 나온 프로토콜이 X-MAC 이다. 본 논문에서는 X-MAC의 문제점을 해결하기 위하여 Express-MAC이라는 새로운 MAC프로토콜을 제안하였다. 무선센서 네트워크는 주로 이벤트 데이터나 상황정보를 인지하는 목적에 많이 사용된다. 특히 침입감지 같은 이벤트 감지를 목적으로 하는 센서네트워크의 전송 패턴은 매우 간헐적이면서도 한 번의 이벤트 발생 시 연속적으로 일어나는 것이 대부분이다. EX-MAC은 위와 같은 센서 네트워크의 주요 전송 패턴을 반영하여 첫 이벤트 발생 시 데이터 전송에서 멀티 홉 경로의 채널 예약 및 awake 구간의 전송 시간 예약 방식을 사용하였다. 전송 경로상의 awake 시간 예약은 연속적인 데이터 전송의 단대단 지연 성능을 향상시켰으며 데이터 송수신 노드의 preamble 길이를 줄임으로써 에너지 소비 측면에서도 효율성을 증대시켰다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.354-358
• /
• 1996

At design stage of the TRXI agricultural tractor transmission (New product of TongYang Moolsan Co., Ltd), the noise and vibration of the transmission were analyzed theoretically for the optimal design of the transmission . For this analysis, the finite element model was developed using a commercial computer software, ANSYS. The noise and vibration of the TRXI transmission housing were predicted by the modal analysis. Natural frequency of the TRXI transmission housing was ranged from 12.53Hz(1st mode ) to 30.05Hz(5th mode). The fifth mode took place at the bearing metal in the area of rear transmission housing and was very close to the gear mesh frequency (30.5Hz) of low rang gear at the low creep shifting . Based on the results , the bearing metal of the range shift housing was reenforced with the rib at design stage.

• 한국통신학회논문지
• /
• 제35권8A호
• /
• pp.801-809
• /
• 2010

대용량 장거리 WDM 전송 시스템의 구현을 위해 전송 링크에 적용되는 광 위상 공액 (optical phase conjugation) 기술은 광 전력과 국부 분산량이 광 위상 공액기 (OPC; optical phase conjugator)에 대해 대칭적으로 분포되어야 하는 한계를 갖는다. 이러한 한계는 OPC를 전체 전송 링크 중간에 위치시켜야 하는 제한을 갖게 한다. 본 논문에서는 광 위상 공액의 이러한 한계를 최적NRD(net residual dispersion)의 도출을 통한 inline 분산제어 (DM; dispersion management)의 적용으로 극복할 수 있다는 것을 살펴보았다. OPC 위치별 최적 NRD의 도출은 precompensation과 postcompensation의 조합을 통해 이루어진다. 최적 NRD는 OPC 위치 외에 WDM 채널의 입사 전력과 시스템 성능 기준에 따라 달라질 수 있다는 것을 확인하였다. 즉 WDM 채널의 수신 성능 기준을 1 dB 눈 열림 패널티 (EOP; eye opening penalty)로 하는 경우 최상 NRD의 도출과 전송 링크에서의 적용으로 입사 전력이 0 dBm인 채널들에 대해서는 OPC를 1000 km의 어떤 곳에도 위치시킬 수 있고, 수신 성능 기준을 3 dB EOP로 하는 경우 precompensation과 postcompensation의 최상의 조합이 아니더라도 입사 전력이 3 dBm인 채널들에 대해서는 NRD를 100 ps/nm부터 200 ps/nm 사이로 설정하게 되면 OPC를 350 km부터 700 km까지의 범위에 위치시킬 수 있는 것을 확인하였다.

• 한국시뮬레이션학회논문지
• /
• 제8권2호
• /
• pp.101-109
• /
• 1999

In a commercial facsimile network system, a simulation analysis has been performed using ARENA due to the unavailability of theoretical models. The effect of a priority is compared with that of the current FCFS rule on the arriving call blocking rate and transmission time delay. The result shows that the priority rule reduces more service time delay as the arrival rate increases. A simulation analysis procedure is proposed to select optimal in/out port ratio at various hourly arrival rates with a given multiple-place transmission requests ratio.

• Archives of Reconstructive Microsurgery
• /
• 제12권1호
• /
• pp.1-12
• /
• 2003

The bridging of nerve gaps is still one of the major problems in peripheral nerve surgery. To evaluate the role of silicon tube in nerve regeneration, gaps were made by resection of tibial components of sciatic nerves of twenty-five New Zealand rabbits. The gaps were divided into five groups. In group I, the tibial components of sciatic nerves were isolated and the incision immediately closed. In group II, 1-cm segments of the nerve were removed and the silicon tubes filled with autogenous skeletal muscle were sutured in place. In group III, 1-cm segments of the nerve were removed and the silicon tubes filled without muscle were sutured in place. In group IV, 2-cm segments of the nerve were removed and the silicon tubes filled with autogenous skeletal muscle were sutured in place. In group V, 2-cm segments of the nerve were removed and the silicon tubes filled without muscle were sutured in place. At 16th week, the eletromyography, the light and transmission electron microscopy were performed. Nerve conduction study stimulating sciatic nerve proximal to the lesion and recording at gastrocnemius muscle showed that the compound muscle action potentials of the group II with 1 cm nerve defect filled with muscle were higher amplitudes than the group III without muscle. Compound muscle action potentials of the group IV with 2 cm defect filled with muscle showed similar results in comparison with the group V. The light and transmission electron microscpy showed that a good morphological pattern of nerve regeneration in 1 cm gap than 2 cm and in gap with muscle than gap without muscle.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1407-1409
• /
• 1999

Distance relay is being used for transmission line protection. Recently, current differential relay is used with high reliability in power system. This kind of relay is reported that it has a reliable detection ability, even so high impedance faults take place in transmission line. Therefore it is expected to use and expand widely in many utilities. Tripping of the relay is decided according to the difference between differential and restraint current. However the tripping criterion can be changed by the manufacturers. This paper presents an operational scheme of current differential relay for transmission line protection with graphical model. It is developed for educational purpose for students interesting in power system and protection engineer in utility. MATLAB is used to establish the models.

• Journal of Welding and Joining
• /
• 제23권5호
• /
• pp.55-60
• /
• 2005

A precise bonding technique, transmission laser bonding using energy transfer, for polymer micro devices is presented. The irradiated IR laser beam passes through the transparent part and absorbed on the opaque part. The absorbed energy is converted into heat and bonding takes place. In order to optimize the bonding quality, the temperature profile on the interface must be obtained. Using optical measurements of the both plates, the absorbed energy can be calculated. At the wavelength of 1100nm $87.5\%$ of incident laser energy was used for bonding process from the calculation. A heat transfer model was applied for obtaining the transient temperature profile. It was found that with the power of 29.5 mW, the interface begins to melt and bond each other in 3 sec and it is in a good agreement with experiment results. The transmission IR laser bonding has a potential in the local precise bonding in MEMS or Lab-on-a-chip applications.