• Journal of Conservation Science
• /
• v.8 no.1 s.11
• /
• pp.16-22
• /
• 1999

Species of 741 charcoal samples, which were excavated from the dwelling sites of the bronze age $(about\;2500\~3100\;B.P)$ at Hyeonwha-ri, Pyungteak, Korea, were identified. Most of samples were deciduous oaks (Quercus spp.; $97.7\%$) and others were alders (Ainus spp.; $1.9\%$) and soft pines (Pinus spp.; $0.4\%$). Tree rings of nine largest samples were also examined. The numbers of annual rings were 8 to 36 and mean ring width was rather narrow $(0.65\~1.82\;mm)$. Most samples possessed pith and tylosis. The results indicate that logs 10 to IS cm diameter had been used for the poles of houses without further processing.

• Applied Biological Chemistry
• /
• v.25 no.4
• /
• pp.211-217
• /
• 1982

Ginsenosides in epidermis·cortex(EC) and xylem-pith(XP) of main body of Panax ginseng(var. atropurpureacaulo) root were investigated in relation to dark purple area on stem. Pattern of ginsenosides, ratio of protopanaxatriol(PT) to diol(PD) and total ginsenoside content were significantly different between EC ana XP, and not related with stem color. The increasing trend of total ginsenosides with decreasing in purple area on stem needs to be tested with greater sample size. The order of ginsenoside content was $Rb_1>Rg_1>Re>Rc>Rg_2>Rb_2>Rf>Rd$ for EC, $Rg_1>Rb_1>Rg_2>Re>Rb_2>Rc>Rf>Rd$ for XP. PT/PD was 1.08 for EC,1.95 for XP. Since total ginsenoside content was 3 times higher in EC than in XP and weight of two parts was almost same, the content of ginsenosides of main body mostly depends on those of EC.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.23-33
• /
• 2005

The development of material separation technique for waste plastic recycling are the necessary situation according to restrict by law the reclamation and incineration of waste plastic after 2004 year, pith enforcement of EPR (Extended Producer Responsibility) system. As the this study is the research on the development of electrostatic separation techniques for recycling of life circles waste plastic, it can improve separation efficiency according to development of charging material and charger. Therefore, we developed the charger and electrostatic separator to increase charging efficiency and material separation per object plastics, using these equipments, we removed PVC up to 99% from two kinds of mixed plastics. And in case of restricting PVC content such as PET, we developed the separation technique that can remove PVC up to 99.99% from PET with PET recovery about 80%. Also, as we separated over 98% for three kinds of mixed plastics, and then established material separation technique to increase recycling of plastic.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.157-165
• /
• 2016

This study investigated several anatomical characteristics of Paulownia tomentosa roots. The root wood was separated into three parts from stem base (top, middle, and base) at different positions below ground. Qualitative anatomical data suggested that the growth rings in earlywood and latewood were structurally different. Furthermore, the root wood vessels were found having 2 to 3 radial multiples and they were appeared in the form of clusters. In addition, some sheath cells and septate axial parenchyma were observed. Regarding the quantitative anatomical characteristics, vessel and ray numbers per $mm^2$, as well as ray width and height differed significantly among the top, middle, and base rood wood parts. However, there were no significant differences in vessel diameters, cell wall thickness, and width and length of wood fibers among those parts. The crystallinity of the root top part was slightly higher than that of the middle and base parts. Furthermore, the vessel numbers, ray numbers, and ray width and height in the near pith (NP) area were higher compared to those in the near bark (NB) area. However, the fiber width and fiber length at NP were lower than those at NB. Overall, this study demonstrated some significant differences in the anatomical characteristics of the top, middle, and base parts of root wood from Paulownia tomentosa.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.4
• /
• pp.285-295
• /
• 2013

The genus Actinidia has been recorded as having total six taxa, composed of four species and two varieties, in Korea. However, its taxonomy remains complex because of disagreement on taxonomic characters used for species boundaries. Based upon morphological, anatomical, and palynological characters, we re-evaluated species delimitations in the genus Actinidia. Critical observation of wild populations and extensive herbarium materials including types were also carried out. It is generally considered that leaf thickness and shape, hair type and color were important diagnostic characters to identify species, but these characters were insufficient to be diagnostic characters because of their wide variation ranges. On the other hands, pith pattern, winter bud protrusion rate, scale leaf number, anther color, fruit shape, and maturity season were taxonomic significance. A. arguta var. platyphylla and A. arguta var. rufinervis have been identified by hair type and color, but these characters showed continuous variation in A. arguta. Therefore, two varieties are treated as synonyms of A. arguta. Consequently four species are recognized in Korea: A. polygama, A. kolomikta, A. rufa, and A. arguta. A key is provided, as well as complete descriptions of the species examined, including information on nomenclatural types, and synonymies.

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.279-286
• /
• 2011

Purpose: Chin is located in a prominent position, and is important to balance and harmony of the face. Genioplasty is widely performed with patients' high satisfaction, yet being relatively simple procedure. Recently in analysis of dentofacial trait, three rotational variables of yaw, pith, and roll are considered with three translational variables (forward/backward, up/down, right/left). And we could correct chin deformity effectively by applying the three rotational variables with three translational variables in genioplasty. Methods: Twenty-eight patients who have chin deformity underwent osseous genioplasty. Preoperative photography, facial three dimensional computed tomography, and cephalography were taken while chin deformities were accessed. The chin deformity was classified into four categories; macrogenia, microgenia, asymmetric chin deformity, and combined chin deformity groups. According to the nature of chin deformities and the patients' desire, preoperative plans were formulated, in consideration of three rotational variables and translational variables. Through intraoral approach, anterior mandible was exposed in the subperiosteal plane between the mental foramens and beneath the mental foramens. In the anterior mandible, vertical and horizontal grid lines with 5 mm intervals were marked to confirm the spatial location of osteomized bone segment after osteotomy. Chin repositioning was done in consideration of axial rotation and planar translation. Results: Most of the patients had achieved satisfactory results with few complications. By considering the three rotational variables, it was possible to make the chin repositioning effectively. One of the patients complained about insufficient chin correction. In other case, persistent sensory impairment around chin was observed. Conclusion: In conclusion, it is worthwhile to apply preoperative analysis and operative procedures in consideration of a three rotational variables with three translational variables in genioplasty.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.117-126
• /
• 1997

In fast grown softwood, there are very large changes in material properties going outward from the pith to bark such as anatomical, physical and mechanical characteristics. Some of variations in anatomical properties with annual ring were then examined from Pinus koraiensis, Larix leptolepis, and Chamaecyparis obtusa, which are major softwoods of plantation in Korea. The large variations of annual ring width during young age of tree tended to stabilize after 25year through the transitional period in 17~23year. The ring density was 1.5~2.4 in 1~10year period, and 3.5~6.3 in 30~35year period, in which juvenile and mature wood were certainly assumed to be formed, respectively. Variations of tracheid length showed functional relationships with annual rings as logarithm. Demarcation between juvenile wood and mature wood could be 16~19year, which was determined from increase rate of tracheid length of 0.2%. Cell wall thickness increased with increase of annual ring even though large variations were observed as well. Variations of cell wall thickness within species were pronounced in latewood than earlywood. The increase of cell wall thickness from juvenile wood to mature wood was predominant in Larix leptolepis as 2.0times, and least in Chamaecyparis obtusa as 1.1 times. Cell diameters showed trends of increase during young age of 1~15year, and consistent afterward. The variations of cell diameter between radial and tangential direction were greater in latewood, and most pronounced in Chamaecyparis obtusa.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.373-379
• /
• 2006

Fiber characteristics and fiber distribution of thermomechanical pulp(TMP), bisulfite chemithermomechanical pulp(bisulfite CTMP), neutral sulfite chemithermomechanical pulp(neutral sulfite CTMP) from kenaf(Hibiscus cannabinus L., Malvaceae) cultivar Tainug-2 cultivated in the reclaimed land of Korea were examined to use effectively nonwood fibers as an alternative raw material sources for papermaking. Yields of TMP and CTMP from kenaf were lower than those of TMP from hardwoods and CTMP from softwoods and hardwoods. Bark fibers of kenaf cultivar Tainung-2 ranged 2.04 to 2.30 mm long and $18.7{\sim}19.7{\mu}m$ width. Core fibers averaged 0.63 to 0.80 mm long and $29.5{\sim}31.4{\mu}m$ wide. Coarseness of bark fiber was higher than that of core fiber, and fiber from TMP were higher than those from both bisulfite CTMP and neutral sulfite CTMP. Curl indexes of bark fibers were higher than those of core fibers. However curl indexes were not significantly affected by the pulping conditions. Short fiber distributions were higher in core fibers from TMP and CTMP and long fiber distributions were higher in bark fibers. There was no significant difference in fiber distribution of whole and core fibers obtained from TMP and CTMP, Fibers from neutral sulfite CTMP, however, exhibited a little higher long fiber distribution. Distinct difference in anatomical characteristics was found between core and bast fibers of kenaf plant. Parenchyma cell, pith parenchyma cell and vessel were observed in core fibers and bast fiber in bast sections.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.1-17
• /
• 2000

Crystals in the woods and barks of Populus maximowiczii and Populus nigra ${\times}$ maximowiczii were examined by light microscopy, scanning electron microscopy and soft X-ray. Populus examined had the wetwood and the heartwood of Populus showed higher moisture content than in adjacent sapwood. The crystals can be detected clearly by the soft X-ray due to their higher densities than the wood. Crystals in xylem wood of Populus were found mainly at heartwood. However, they were concentrated in specific areas such as in color-stained area or along the specific annual rings. Crystals showed the highest occurrence around the pith. Within a growth ring the amount of crystals in earlywood was more abundant than in latewood. Crystals were observed mainly at vessels and fibers although they occurred at all kinds of cells in heartwood. Crystals in the bark were scattered evenly both in inner bark and in outer bark. Populus nigra${\times}$maximowiczii showed higher frequency of leaf knots than Populus maximowiczii.

• Journal of Plant Biotechnology
• /
• v.31 no.2
• /
• pp.145-149
• /
• 2004

We investigated the anatomical aspects of vitrification in peace poplar. Comparisons were made with regard to characteristics occurring between hyperhydric and normal shoots in shoot proliferation cultures on MS medium containing 0.2 mg/L BA. Compared with normal plants, hyperhydric plants had thick, curled, and dark green leaves. Hyperhydric stems were thicker and shorter than those of normal stems. When examined under the microscopes, the mesophyll palisade cells of hyperhydric leaves were vacuolated, whereas those of normal leaves contained normal and enriched vacuole with cytoplasm. Generally, the hyperhydric leaves showed poorly developed palisade parenchyma, and revealed irregular and bigger sized intercellular structures in both palisade and spongy parenchyma as well as epidermis cells compare to those of normal leaves. In addition, the hyperhydric leaves had lower stomatal density and bigger sized cell. Vascular tissues of hyperhydic stems were less differentiated because of poorly lignified xylem tissue. The greatly expanded cortical cells and pith appeared to be the main cause of thick stems as compared with normal stems.