• 한국광학회지
• /
• 제19권6호
• /
• pp.422-428
• /
• 2008

본 논문에서는 툴 영향 함수(Tool Influence Function)를 이용한 피치(pitch)툴의 정량적 물질 제거 제어 기법에 대하여 기술하였다. 피치 툴은 뛰어난 표면 거칠기를 생성시키는 반면 툴의 물질 변형이 상대적으로 크고 물질제거가 어렵기 때문에 일반적으로 숙련된 가공 기술자에 의한 정성적 연마 기법으로 간주되었다. 하지만 이러한 피치 툴을 이용한 수치모사 및 실험을 수행한 결과, 정량적 피치 툴 연마 기법이 가능하다는 것을 알 수 있었다. 실험과 수치모사에 의한 물질 제거 형상은 약 79%의 정확도로 일치하였다. 또한 직경 280 mm의 평면가공에 대한 수치모사 단계에서 5번의 모의 가공 후 p-v(peak to valley) $1{\mu}m$의 최초 형상오차를 168 nm까지 낮추는 결과를 얻을 수 있었다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2002년도 하계학술발표대회 논문집 제21권 1호
• /
• pp.147-150
• /
• 2002

This paper describes procedures to implement a real-time pitch analyzer using Matlab. Matlab is a multi-purpose signal-processing tool. Using this tool real-time analysis tool is implemented. To make it real-time we used data acquisition toolbox which comes with Matlab. Autocorrelation method was used as a basic algorithm. The resulting pitch informations are displayed in two different forms, i.e. instantaneous pitch plot and pitch track. V/UV decision is performed using zero crossing rate and energy Informations based on 500 utterances.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.69-77
• /
• 1998

Linear displacement accuracy is one of the most important factors that determine machine tool accuracy The laser interferometer has been usually recommended for the measurement of linear displacement accuracy. In this paper, microcomputer aided measurement and compensation system has been developed for the pitch error in a CNC machine tool. For accurate pitch error calculation. the analysis code for the pitch error has been also implemented according to the international standards (ISO). The PC based automatic compensation system for the pitch error is also implemented. A new algorithm for calculating optimum value for pitch error compensation is proposed, minimizing the deviation at each target points. The development system has been applied to a practical CNC maching center and the performance has been demonstrated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.297-302
• /
• 1997

Linear displacement accuracy is one of the most important factors that determine machine tool accuracy. The laser interferometer has been usually recommended for the measurement of linear displacement accuracy. In this paper, microcomputer aided measurement and compensation system has been developed forthe pitch error in a CNC machine tool. For accurate pitch error calculation, the analysis code for the pitch error has been also implemented according to the international standards(ISO). The PC based automatic compensation system for the pitch error is also implemented. A new algorithm for calculating optimum value for pitch error compensation is proposed, minimizing the deviation at each target points. The development system has been applied to a practical CNC maching center and the performance has been demonstrated.

• 음성과학
• /
• 제5권1호
• /
• pp.49-62
• /
• 1999

This study is concerned with the educational program Visual Analysis Tool (VAT) for sound development for foreign intonation using personal computer. The VAT can run on IBM-PC 386 compatible or higher. It shows the spectrogram, waveform, intensity and the pitch contour. The system can work freely on either waveform zoom in-out or the documentation of measured value. In this paper, intensity and pitch contour information were used. Twelve French sentences were recorded from a French conversational tape. And three Korean participated in this study. They spoke out twelve sentences repeatly and trid to make the same pitch contour - by visually matching their pitcgh contour to the native speaker's. A sentences were recorded again when the participants themselves became familiar with intonation, intensity and pauses. The difference of pitch contour(rising or falling), pitch value, energy, total duration of sentences and the boundary of rhythmic group between native speaker's and theirs before and after training were compared. The results were as following: 1) In a declarative sentence: a native speaker's general pitch contour falls at the end of sentences. But the participant's pitch contours were flat before training. 2) In an interrogative: the native speaker made his pitch contours it rise at the end of sentences with the exception of wh-questions (qu'est-ce que) and a pitch value varied a greath. In the interrogative 'S + V' form sentences, we found the pitch contour rose higher in comparison to other sentences and it varied a great deal. 3) In an exclamatory sentence: the pitch contour looked like a shape of a mountain. But the participants could not make it fall before or after training.

• Wind and Structures
• /
• 제18권2호
• /
• pp.195-213
• /
• 2014

Recently, the horizontal axis rotor performance optimizer (HARP_Opt) tool was developed in the National Renewable Energy Laboratory, USA. This innovative tool is becoming more popular in the wind turbine industry and in the field of academic research. HARP_Optwas developed on the basis of two fundamental modules, namely, WT_Perf, a performance evaluator computer code using the blade element momentum theory; and a genetic algorithm module, which is used as an optimizer. A pattern search algorithm was more recently incorporated to enhance the optimization capability, especially the calculation time and consistency of the solutions. The blade optimization is an aspect that is highly dependent on experience and requires significant consideration on rotor control strategies, wind data, and generator type. In this study, the effects of rotor control strategies including fixed speed and fixed pitch, variable speed and fixed pitch, fixed speed and variable pitch, and variable speed and variable pitch algorithms on optimal blade shapes and rotor performance are investigated using optimized blade designs. The effects of environmental wind data and the objective functions used for optimization are also quantitatively evaluated using the HARP_Opt tool. Performance indices such as annual energy production, thrust, torque, and roof-flap moment forces are compared.

• 한국기계연구소 소보
• /
• 통권15호
• /
• pp.25-35
• /
• 1985

During one revolution of a gear, the intensity of the gear-meshing noise or vibration will vary, depending upon the run-out in the pitch diameter of the gear. Here noise can be produced bu excentricity of the shaft with respect to the base circle and by pitch errors. According to the noise generated is clearly dependent on the force and the amount of energy expended in elastically straining the machine member. The purpose of this paper is to discuss the analysis of the noise and technical reduction of gear noise for machine tool.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.62-69
• /
• 1993

The accuracy of machine tools is the major factor concerned with the acuracy of the processed work. The feed errors of feed system in machine tool, therfore, make the machining errors of work directly on processing. In this point, this study focused on the generative elements of feed errors in CNC cylindrical grinding machine, such as supporting method of ball screw, the effect of pitch and yaw error and the position detecting method in servo system when operating its shaft of grinding wheel head. Furthermore, in order to improve the driving accuracy of this machine tool, feed errors are measured by a laser interferometer. Results obtained in this study provide some useful informations to attain high accuracy of CNC machine tool.

• 소성∙가공
• /
• 제17권6호
• /
• pp.412-419
• /
• 2008

Using lightweight materials in vehicle manufacturing in order to reduce energy consumption is one of the most effective approach to decrease pollutant emissions. As a lightweight material, magnesium is increasingly employed in automotive parts. However, because of its hexagonal closed-packed(HCP) crystal structure, in which only the basal plane can move, the magnesium alloy sheets show low ductility and formability at room temperature. Thus the press forming of magnesium alloy sheets has been performed at elevated temperature within range of $200^{\circ}C{\sim}250^{\circ}C$. Here we try the possibility of sheet metal forming at room temperature by adopting incremental forming technique with rotating tool, which is so called as rotational-incremental sheet forming(RISF). In this rotational-incremental sheet forming the spindle tool rotates on the surface of the sheet metal and moves incrementally with small pitch to fit the sheet metal on the desired shape. There are various variables defining the formability of sheet metals in the incremental forming such as speed of spindle, pitch size, lubricants, etc. In this study, we clarified the effects of spindle speed and pitch size upon formability of magnesium alloy sheets at room temperature. In case of 0.2, 0.3 and 0.4mm of pitch size with hemispherical rotating tool of 6.0mm radius, the maximum temperature at contact area between rotating tool and sheet metal were $119.2^{\circ}C,\;130.8^{\circ}C,\;and\;177.3^{\circ}C$. Also in case of 300, 500, and 700rpm of spindle speed, the maximum temperature at the contact area were $109.7^{\circ}C,\;130.8^{\circ}C\;and\;189.8^{\circ}C$.

• 음성과학
• /
• 제12권4호
• /
• pp.215-226
• /
• 2005

This study is an attempt to investigate effect of pitch treatment program using visual feedback for profound deaf adults. Dr. Speech program was applied as a training tool. The subjects of this study were 3 profound deaf adults. Speech samples for evaluation were vowel prolongations and connected speech. Analysis was performed under the principle of single subject research design. As results of this study, all subjects showed the treatment effects which were represented by lowering fundamental frequency and speaking fundamental frequency.