• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.82-93
• /
• 2008

The flowfield behind two cylinders and flow-induced noise generated from the cylinders in various arrangement are numerically investigated based on the finite difference lattice Boltzmann model with 21 velocity bits. which is introduced a flexible specific heat ${\gamma}$ to simulate diatomic gases like air. In an isolated cylinder with two type of mesh. some flow parameters such as Strouhal number $S_t$ and acoustic pressure ${\Delta}p$ simulated from the solution are given and quantitatively compared with those provided the previous works. The effects of the center-to-center pitch ratio $L_{cc}/d=2.0$ in staggered circular cylinders as shown in Fig. 1 and angles of incidence ${\alpha}=30^{\circ}(T_{cc}/d=0.5)$, $45^{\circ}(T_{cc}/d =0.707)$ and $60^{\circ}\;(T_{cc}/d=0.866)$, respectively, are studied. Our analysis focuses on the small-scale instabilities of vortex shedding, which occurs in staggered arrangement. With the results of drag $C_d$ and lift $C_l$ coefficients and vorticity contours. the mechanisms of the interference phenomenon and its interaction with the two-dimensional vortical structures are present in the flowfields under $Re\;{\le}\;200$. The results show that we successively capture very small pressure fluctuations, with the same frequency of vortex shedding, much smaller than the whole pressure fluctuation around pairs of circular cylinders. The upstream cylinder behaves like an isolated single cylinder, while the downstream one experiences wake-induced flutter. It is expected that, therefore, the relative position of the downstream cylinder has significant effects on the flow-induce noise, hydrodynamic force and vortex shedding characteristics of the cylinders.

• 대한후두음성언어의학회지
• /
• 제11권1호
• /
• pp.39-45
• /
• 2000

Background and Objectives : Accent method is one of holistic approaches for behavior readjustment of voice therapy The aim of this study is to evaluate the efficacy of the accent method of voice therapy for the patients who have no improvement after LMS. Materials and Methods : Of the patients who had been undergone LMS during the period from Jan. 1999 to Dec. 1999, medical records of 38 patients who had not been improved were studied retrospectively. 19 patients(treatment group) were applied accent method and the other 19 patients(control group) refused voice therapy. The voice of all the patients of both group were analysed with CSL and Aerophone II programs in pre- and post operative period. The voice of treatment group were analysed with Visi-Pitch II program before the application of accent method and after the completion of accent method. Then, the results were compared using paired t-test. Results : The results of voice analysis were not different statistically between pre- and postoperative examination in both group. After application of accent method in the treatment group, fundamental frequency(F$_{0}$) of male, relative average pertubation, and shimmer were revealed significant differences(p＜0.01), and decrease in grade(G) scale and roughness(R) scale were statistically Important in perceptual analysis using GRBAS criteria(p＜0.01). But $F_0$ of female, maximal phonation time and S to Z ratio were not revealed significant differences. Conclusions : Accent method of voice therapy may be as a supplement- ary therapy in the patients who were not improved after surgery.

• 대한조선학회논문집
• /
• 제45권1호
• /
• pp.29-41
• /
• 2008

The present paper provides a CFD analysis of diffraction problem for a ship with forward speed using an unsteady RANS simulation method, a WAVIS code. The WAVIS viscous solver adopting a finite volume method has second order accuracy in time and field discretizaions for the RANS equations. A two phase level-set method and a realizable ${\kappa}-{\varepsilon}$ turbulence model are adopted to compute the free surface and to meet the turbulence closure, respectively. To validate the capability of the present numerical methods for the simulation of an unsteady progressive regular wave, computations are performed for three grid sets with refinement ratio of ${\sqrt{2}}$. The main simulation is performed for a DTMB5512 model with a forward speed in a regular head sea condition. Validation of the present numerical method is carried out by comparing the present CFD results with available unsteady experimental data published in the 2005 Tokyo CFD Workshop: resistance, heave force, pitch moment, unsteady free surface elevations and velocity fields.

• 비파괴검사학회지
• /
• 제17권3호
• /
• pp.156-161
• /
• 1997

열 전달 효율을 증가시키기 위하여 튜브의 내 외면에 울퉁불퉁한 지느러미가 부착된 fin 튜브의 와전류탐상을 위하여 와전류 탐촉자를 설계하고 시험하였다. Fin 튜브는 거친 표면으로 인하여 와전류탐상으로 결함을 찾기 위해서는 많은 주의가 필요하다. 본 연구에서는 규격이 다른 와전류 탐촉자를 제작하고 인공 결함 시험편에 대하여 탐상을 실시하였다. 실험한 와전류탐상 신호에 대하여 FFT를 통하여 주파수 스펙트럼을 구하였고 디지털 필터링의 신호 처리를 하여 신호의 주파수 특성을 고찰하였다. 신호와 주파수 특성을 분석한 결과, 본 연구 대상 시험편에서와 같이 1mm 피치의 fin 튜브의 경우 4mm의 코일 거리를 지닌 탐촉자가 가장 좋은 S/N비를 나타내었다.

• 한국전자파학회논문지
• /
• 제15권3호
• /
• pp.311-318
• /
• 2004

PCM/FM과 같은 디지털 변조 방식의 텔레메트리 시스템에 있어서 비트 에러율(BER)을 최소화하여 수신된 신호의 품질을 향상시키기 위해서는 충분히 안정된 신호마진을 갖도록 회선설계가 이루어져야 한다. 특히 고속으로 이동하는 비행체의 경우에는 비행체 자세에 따른 송수신 안테나 사이의 안테나 이득패턴의 변화와 비행거리에 따른 손실이 동반되어지며 이로 인해서 회선상의 요동이 발생된다. 본 논문에서는 2002년 11월에 한국항공 우주연구원에서 시험 발사되었던 국내 최초 액체로켓 KSR-III의 비행시험 중에 S-대역 지상국에서 측정된 텔레메트리 신호의 신호대잡음비(SNR) 변화와 로켓의 비행 궤적 및 롤, 피치, 요 등의 자세변화를 고려하여 시뮬레이션으로 계산된 결과를 비교 분석하였으며 이를 통해 회선마진의 변화가 잘 일치함을 확인할 수 있었다. 또한, 탑재 안테나 개수가 1개인 경우와 롤 변화가 없는 가상의 비행 상황에 대해서 시뮬레이션을 수행하여 회선 변화를 예측할 수 있었다.

• Wind and Structures
• /
• 제17권6호
• /
• pp.647-670
• /
• 2013

The paper presents a numerical approach to study of fluid flow characteristics and to predict performance of wind turbines. The numerical model is based on Finite-volume method (FVM) discretization of unsteady Reynolds-averaged Navier-Stokes (URANS) equations. The movement of turbine blades is modeled using moving mesh technique. The turbulence is modeled using commonly used turbulence models: Renormalization Group (RNG) k-${\varepsilon}$ turbulence model and the standard k-${\varepsilon}$ and k-${\omega}$ turbulence models. The model is validated with the experimental data over a large range of tip-speed to wind ratio (TSR) and blade pitch angles. In order to demonstrate the use of numerical method as a tool for designing wind turbines, two dimensional (2-D) and three-dimensional (3-D) simulations are carried out to study the flow through a small scale Darrieus type H-rotor Vertical Axis Wind Turbine (VAWT). The flows predictions are used to determine the performance of the turbine. The turbine consists of 3-symmetrical NACA0022 blades. A number of simulations are performed for a range of approaching angles and wind speeds. This numerical study highlights the concerns with the self-starting capabilities of the present VAWT turbine. However results also indicate that self-starting capabilities of the turbine can be increased when the mounted angle of attack of the blades is increased. The 2-D simulations using the presented model can successfully be used at preliminary stage of turbine design to compare performance of the turbine for different design and operating parameters, whereas 3-D studies are preferred for the final design.

• 대한기계학회논문집B
• /
• 제40권3호
• /
• pp.157-164
• /
• 2016

봉다발 유동에서 비틀림 혼합날개 지지격자의 대류열전달 성능을 실험적으로 평가하였다. 시험부는 $4{\times}4$ 정사각 배열의 봉다발로 제작하였고, 모의 봉다발에서 봉 중심 간 거리와 봉 외경의 비는 ~1.35이다. 대류열전달 성능 평가를 위해 혼합날개 지지격자 하류에서 봉 벽면 온도의 원주방향 및 축방향 분포를 측정하였다. 원주방향의 경우, 지지격자 하류에서 비틀림 혼합날개 끝이 향하는 벽면의 온도가 가장 낮게 나타났는데 이는 비틀림 혼합날개에 의해 왜곡된 유동 때문으로 판단된다. 반면, 축방향의 경우, 혼합날개 지지격자 근처에서 벽면의 온도가 크게 낮아졌는데, 이는 비틀림 혼합날개에 의해 대류열전달이 향상됨을 의미한다. 비틀림 혼합날개 지지격자에 의해 대류열전달 성능은 지지격자 상류에 비해 지지격자 근처 하류에서 ~35 % 향상되었고, 실험데이터를 기반으로 비틀림 혼합날개 지지격자에 대한 열전달 성능 예측 상관식을 제안하였다.

• 대한족부족관절학회지
• /
• 제20권1호
• /
• pp.27-31
• /
• 2016

Purpose: Several techniques have been introduced for correction of pes cavo-varus deformity. We retrospectively reviewed and compared the data of patients who underwent 1st metatarsal osteotomy alone, Dwyer's osteotomy alone, and 1st metatarsal osteotomy combined with Dwyer's osteotomy to determine the effect on radiographic parameters. Materials and Methods: Data on 28 cases in 27 consecutive patients recruited from 2006 to 2014 who underwent 1st metatarsal osteotomy alone (group F), Dwyer's osteotomy alone (group H), or 1st metatarsal osteotomy followed by Dwyer's osteotomy (group HF) with a minimum 1-year follow-up were reviewed retrospectively. Results: Calcaneal pitch angle on the standing foot lateral radiographs was significantly decreased after the operation in groups H and HF whereas Meary angle was decreased in groups F and HF. Hindfoot alignment angle and ratio on the hindfoot alignment view were improved in groups H and HF. Maximal medial cuneiform height reduction was observed in group HF. 1st ray was significantly shortened in groups F and HF. Conclusion: Combined forefoot and hindfoot operation took the largest correction power of all radiologic parameters.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.150-158
• /
• 2002

Local heat/mass transfer and friction loss in a square duct roughened with various types of continuous and discrete rib turbulators are investigated. The combined effects of the gap flows of the discrete ribs and the secondary flows are examined for the purpose of the reduction of thermally weak regions and the promotion of the uniformity of heat/mass transfer distributions as well as the ;augmentation of average heat/mass transfer. The rib-to-rib pitch to the rib height ratio (p/e) of 8 and the rib angles of 90° and 60° are selected with e/D$\_$h/=0.08. The vortical structure of the secondary flows induced by the parallel angled arrays are quite distinct from that induced by the cross angled arrays. This distinction influences on heat/mass transfer and friction loss in all the tested cases. The gap flows of the discrete ribs reduce the strength of the secondary flows but promote local turbulence and flow mixing. Consequently, the angled discrete ribs with the small gaps provide a more uniform heat/mass transfer distribution sustaining high average heat/mass transfer.

• 한국전문물리치료학회지
• /
• 제16권2호
• /
• pp.16-23
• /
• 2009

The purpose of this study was to investigate the effects postural changes on respiratory muscles and acoustic parameters of the children with spastic cerebral palsy. Nine children with spastic cerebral palsy who required assistance when walking were selected. The ages of the children ranged from 6 to 9 years old. The phonation of the sustained vowel /a/ and the voice qualities of each child such as fundamental frequency($F_0$; Hz), pitch variation (Jitter; %), amplitude variation (Shimmer; %) and noise to harmonic ratio (NHR) were analyzed by Multi-Dimensional Voice Program (MDVP). The muscle activity of three major respiratory muscles: pectoralis major muscle, upper trapezius muscle and rectus abdorminalis muscle, were measured by examining the root mean square (RMS) of the surface EMG to investigate the impact of changes in the adjusted sitting posture of each subject. However, the RMS of pectoralis major muscle showed a significant differences (p<.05). Secondly, there were no significant differences in $F_0$, Jitter and Shimmer between pre and post posture change, but there was a significant difference in NHR (p<.05). The data were collected in each individual; once prior and once after the sitting posture change. The data were analyzed by Wilcoxon signed ranks-test using SPSS version 14.0 for Windows. The findings of this study were as follows; Firstly, the RMS of upper trapezius and rectus abdorminalis muscle were not significant different between pre and post sitting posture changes. From the result, it is concluded that changes in the adjusted sitting posture decreases the abnormal respiratory patterns in the children with spastic cerebral palsy which is characterized by the hyperactivity of the respiratory muscles in breathing. Also, there is increased on the voice qualities in children with spastic cerebral palsy.