• 한국지구과학회지
• /
• 제42권5호
• /
• pp.514-523
• /
• 2021

고창 표준기상관측소(Gochang Standard Weather Observatory, GSWO)에서 3년간(2014-2016년) 관측한 겨울철 강수량 자료를 사용하여 겨울철 관측환경에 따른 강수량 관측 특성을 분석하였다. 이를 위해, 설치환경이 다른 강수량계 4종인 NS(No Shield), SA(Single Alter), DFIR(Double Fence Intercomparison Reference), PG(Pit Gauge)를 사용하여, DFIR을 기준으로 누적 강수량 차이, 강수 유형별 특성, 풍속 변화에 따른 수집효율을 분석하였다. 강수 유형은 고창 종관기상관측장비(Automated Synoptic Observing System, ASOS)의 기온 관측 자료를 사용하여 강우, 혼합 강수, 강설로 분류하여 분석하였다. 겨울철 누적 강수량은 SA, NS, PG 순으로 DFIR과 유사하게 나타났으며, 통계 분석 결과에서는 SA가 DFIR과 가장 유사한 결과를 보였다. 결과적으로, 겨울철 강수량 관측에서는 SA가 기준 강수량계와 가장 유사하게 관측되었으며, PG는 겨울철 관측에 적합하지 않은 것으로 분석된다.

• 한국습지학회지
• /
• 제16권1호
• /
• pp.19-32
• /
• 2014

본 연구에서는 우량계로 측정한 강우량이 실제 지표면에 떨어지는 강우 값에 근접하도록 보정함으로써, 유출해석 및 기타 수문분석에 적용할 경우 신뢰도 높은 결과를 얻는데 목적이 있다. 지상우량계로 관측한 강우량에 대한 바람의 영향을 분석하기 위하여, 표준기상관측소인 추풍령기상대에 설치된 바람막이의 유(有) 무(無)에 따른 우량계와 기준우량계의 자료를 획득하였다. 획득한 강우를 단순선형회귀 모형과 신경망 모형을 이용하여 지상강우를 보정하였으며, $Vflo^{TM}$모형을 이용한 유출모의를 통하여 자료의 신뢰도를 검증하였다. 단순선형회귀 모형을 사용한 보정 강우량은 실제 관측된 강우량보다 5%~18%가 큰 강우량을 나타냈으며, 강우획득에 있어 바람의 영향은 1.6~3.3m/s의 풍속구간에서 가장 큰 것을 확인하였다. 또한 회귀모형에서는 풍속구간 5.5m/s이상일 경우 자료의 개수가 전체자료의 0.7%로 매우 작고, 이상치가 획득됨으로써 회귀모형 적용의 어려움이 있었다. 반면에 신경망 기법을 이용한 지상강우의 보정은 전체적으로 관측 값보다 10~20% 가량 강우가 적게 추정되었다. 통계분석결과, 전체적으로 편차가 크고 평균 강우획득량이 클수록 신경망 모형의 적용성이 높게 나타났으며, 획득한 강우량의 극치값이 크게 나타날수록 선형회귀 모형의 적용성이 높게 나타나는 것을 확인하였다. 본 연구결과로 신뢰성 높은 강우보정을 위해서는 지역별 강우 특성에 따른 적합한 보정방법을 선택해야 할 것으로 판단되며, 앞으로의 수문해석에 있어 본 논문에서 제시하는 강우 보정방법을 적용함으로써 신뢰도 높은 수문해석 결과를 기대할 수 있을 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제14권2호
• /
• pp.1-4
• /
• 1989

To determine the thickness of coronal hard structure the minimal distance between pupal surface and outer surface of crown was measured by means of Bowley gauge on extracted first molars. Upper(28 teeth) and lower(24 teeth) were carefully collected from 30-39 years of age and male. The teeth were split mesio-distally through central pit. On the split surface various part which are deeply related in cavity preparation were measured (schematic drawing). The results were as follows: A : Distance from mesio-cervical enamel to pulp chamber surface. upper $2.63{\pm}0.19$(mm) Lower $2.18{\pm}0.27$(um) B : Distance from mesial chamber ceiling to mesial surface upper $2.75{\pm}0.34$ Lower $2.62{\pm}0.31$ C : Distance from mesial chamber ceiling to occlusal surface upper $3.82{\pm}0.51$ Lower $3.49{\pm}0.50$ D : Distance from distal chamber ceiling to occlusal surface upper $4.28{\pm}0.69$ Lower $3.90{\pm}0.52$ E : Distance from distal chamber ceiling to distal surface upper $2.79{\pm}0.45$ Lower $2.41{\pm}0.40$ F : Distance from disto cervical enamel to pulp chamber surface upper $2.49{\pm}0.24$ Lower $2.39{\pm}0.25$.

• 한국식품저장유통학회지
• /
• 제13권2호
• /
• pp.154-160
• /
• 2006

기능성 음료(CJ(주) 팻다운)의 유통기간을 설정하기 위해 12주 동안 저장하면서 이화학적 및 관능적 특성을 조사하였다. 진공도, 당도, pH 및 산도는 저장기간 동안 거의 변화를 나타내지 않았으며, 총균 또한 검출되지 않아 저장기간 동안 미생물학적으로도 안전한 것으로 나타났다. 관능검사의 전반적인 기호도와 이화학적 특성을 회귀분석한 결과 색도의 b (yellowness)값이 0.9504으로 가장 높은 상관계수를 나타내어 b값을 기능성 음료의 품질지표로 설정하였다. b값은 0차 반응식을 따르는 것으로 나타났으며, 각 온도별 반응상수를 이용하여 $Q_{10}$값을 구하여 유통기간을 산정한 결과 $20^{\circ}C$에서 73.89주, $30^{\circ}C$에서 34.21주, $40^{\circ}C$에서 13.21주로 나타났다. Arrhenius 식을 이용하여 계산된 활성화에너지 15.87 kcal/mol을 이용하여 실험하지 않은 온도, 즉 우리나라의 연평균 기온 $10{\sim}16^{\circ}C$에서의 저장기간을 구한 결과 $107.88{\sim}193.59$주로써 기능성 음료는 상온에서 2년간의 유통이 가능한 것으로 나타났다.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.242-255
• /
• 1999

The purpose of this study was to estimate the morphology and the size of permanent mandibular molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study The subjects were taken impression to make study model. On the study model, the 5 dentists measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. The clinical crown height, width, thickness and the other anatomical structures had symmetrical relationship between the left and right mandibular molar. 2. In the clinical crown height aspect, the buccal crown heights always were higher than the lingual crown height. The heights of the each surface, the buccal or lingual surface, were gradually decreased from the 1st molar to the 2nd molar and the difference on the buccal surface was higher than that on the lingual surface. 3. In the clinical crown width aspect, the mesiodistal measurement of the mandibular 1st molar was higher than that of the mandibular 2st molar. 4. In the clinical crown thickness aspect, the mesial buccolingual measurement was highest on the mandibular 1st molar and the distal buccolingual distance was lowest on the mandibular 2nd molar. This distal thickness of the mandibular molar always was higher than that of the mesial half. 5. The well-developed mesiobuccal groove of the 1st molar was observed more often than that of the 2nd molar. The buccal pit was also observed more frequently at the 1st molar, but the frequency(35%) was not high. 6. The occlusal type according to the number of cusp was almost 5-cusp(98%) in the 1st molar and was also 5-cusp(63%) in the 2nd molar. The frequency of the 6th cusp was 31% in the 1st molar and was 22% in the 2nd molar. The frequency of the 7th cusp was below 2of in the both teeth. 7. In the buccolingual intercuspal distance aspect of the mesial and distal half, the intercuspal distance of distal half was higher than that of the mesial half on the 1st and 2nd molar, but the difference on the 1st molar was higher than that on the 2nd molar. 8. The difference between the widths of the buccal and lingual half was 1.5mm in the 1st molar and 0.8mm in the 2nd molar. Therefore the lingual convergency of the occlusal surface was more higher in the 1st molar. 9. On the mandibular 1st and 2nd molar, the distobuccal external angle was more acute than the mesiobuccal external angle. But the mesiobuccal internal angle was more acute than the distobuccal internal angle. 10. When the mandibular molar was a 5-cusp type, the development of the distal cusp on the 1st molar was better than that on the 2nd molar. The difference between the cusps was around 0.4mm.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.