• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.353-360
• /
• 2000

We developed large diameter sampler (we called KICT type large diameter sampler) to obtain undisturbed clay and sand samples. In-situ test carried out in the In-Chon international airport and Kim-Hae. Also we obtained undisturbed sample with a hydraulic piston sampler in the nearly site and carried out unconfined compression test, consolidation test and triaxial test. The result, unconfined compression strength, secant modules, preconsolidation pressure and undrained shear strength of samples to obtain KICT type large diameter sampler are larger than that of samples to obtain hydraulic piston sampler. But failure strains and volume changes at the consolidation of samples to obtain KICT type large diameter sampler are smaller than that of samples to obtain hydraulic piston sampler

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.3
• /
• pp.5-15
• /
• 2005

A large diameter sampler that can take undisturbed samples from soft ground was developed by KICT. In order to compare the quality of samples taken by the sampler with those of the traditional piston sampler, a series of laboratory tests were performed. Samples were taken at different sites such as Incheon, Gimhae, Yangsan and Busan. The results showed that the values of unconfined compression strength, secant modulus, pre-consolidation pressure, undrained shear strength, and shear modulus exhibited higher in samples taken by the large scale sampler. Strains at shear failure and volumetric strains were low for the new sampler. It was proved from the comparison that better quality samples could be obtained by the KICT sampler.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1365-1369
• /
• 2008

A large diameter sampler (KICT-type large diameter sampler) was developed to take undisturbed samples from not only soft ground but also sandy and weathered ground. The KICT-type large diameter sampler was manufactured with the principle of triple core barrel sampling. In this study, the applicability to offshore ground sampling of the KICT-type large diameter sampler was confirmed at Inchoen Port construction site. And, in order to compare the quality of samples taken by the sampler with that of the traditional piston sampler, a series of laboratory tests were performed. From the test results, the samples taken by the KICT-type large diameter sampler showed higher quality than the traditional thin-walled tube samples.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.1
• /
• pp.27-31
• /
• 2008

In this study, evaluation of samples' reflection of in-situ condition was performed for those by 225 mm KICT large sampler and NX size piston sampler. Disturbance analysis was conducted for the clay sampled by two kinds of sampler throughout consolidation tests, uniaxial tests and triaxial test, under the same condition. From the analysis it can be seen that not only the initial void ratio and preconsolidation pressure from KICT large sampler but strength parameters from both uniaxial and triaxial compression tests are also about 10% higher than those of NX size piston sampler's.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.3
• /
• pp.29-34
• /
• 2008

A large diameter sampler was developed to take undisturbed samples from not only soft ground but also sandy and weathered ground. The large diameter sampler which was developed in Korea Institute of Construction Technology(KICT-type large diameter sampler) was manufactured based on the principle of triple core barrel sampling. A specially designed cutting device was used to cut and contain various kinds of samples in the sampler during a sampling and retrieval procedure. By adjusting the stiffness of the spring located at the top of the sampler, the distance between the cutting shoe and auger can be controlled in accordance with the ground condition. In order to investigate the applicability of the developed sampler and compare the quality of the samples taken by the sampler with that by the traditional thin-walled tube sampler, samples were taken at various sites according to the ground condition. And a series of laboratory tests such as the unconfined compress ion test, triaxial compression test, oedometer test, large diameter Rowe cell consolidation test (D: 150 mm) were performed. The test results showed that the samples by the KICT-type large diameter sampler show higher quality than the samples by the thin-walled tube sampler. And the validity and applicability of the developed KICT-type large diameter sampler was confirmed accordingly.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.725-732
• /
• 2003

It was achieved that Rowecell test for this undisturbed sample was picked by Block sampler($\phi$:250mm, L:500mm) and hydraulic piston sampler($\phi$:76mm, L:850mm) in the marine clay of YONGYUDO and YEONGJONGDO in this research. Ratio of coefficient of consolidation was analyzed through comparison with C$\_$h/ by CPTu and C$\_$v/ and C$\_$h/ by existent consolidation test. According to analysis, coefficient of consolidation of block sample is fairly greater than coefficient of consolidation of piston sample. And the bigger diameter of undisturbed sample, sample disturbance could know decreasing. Coefficient of consolidation by Rowecell test measured more greatly than coefficient of consolidation by existent consolidation test. Rowecell test could know decreasing consolidation rate because of smear effect by Mandrel injection. Also, C$\_$h/ by CPTu shows deviation by each analysis method, selection of suitable analysis method judged by important leading in the coefficient of consolidation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.639-646
• /
• 2000

It is important to estimate the mechanical properties of clay since it is directly related to the design and the construction of geotechnical structures. Site exploration, which is composed of boring, sampling, in-situ, or laboratory tests, is preformed to estimate the mechanical properties. However, mechanical properties of clay measured from laboratory test may be different from in-situ properties due to disturbances occurred during sampling, transportation, storage, and trimming. In this study, the degree of disturbance according to sampling method was estimated with the test results of CK/sub o/U triaxial compression test on Yangsan clay. The soil samples were obtained by three types of sampling method, j.e., 76mm-tube sampler, 76mm-piston sampler, and block sampler. In order to evaluate the quality of samples, volumetric strain, undrained shear strength, secant Young's modulus, and pore pressure coefficient at peak measured from each sample were compared with one another. From the test results, it was observed that mechanical properties of the block and piston samples were more reliable than those of tube samples. But it was observed that the water content of piston was similar to that of tube samples at given depths while the water content of block samples was 14.3∼15.8% smaller than that of piston and tube samples. In addition to the evaluation of the quality of samples, relationship between c/sub u// σ/sub vc/'and OCR was established from the results of the CK/sub o/U triaxial compression tests, which were carried out using SHANSEP method. And also undrained shear strength was analyzed using the in-situ test data such as Cone Penetration Test(CPT), Dilatometer Test(DMT), and Field Vane Test(FVT) and was compared with that evaluated from CK/sub o/U triaxial compression test.

• Journal of Soil and Groundwater Environment
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2024

As part of monitoring technology aimed at verifying the stability of CO₂ geologic storage and mitigating concerns about leakage, a method for measuring the pH and alkalinity of high-pressure fluid samples was established to obtain practical technology. pH measurement for high-pressure samples utilized a high-pressure pH electrode, and alkalinity was measured using the Gran titration method for samples collected with a piston cylinder sampler (PCS). Experimental samples, referencing CO₂-rich water and CO₂ geologic storage studies, were prepared in the laboratory. The PCS controls the piston, preventing CO₂ degassing and maintaining fluid pressure, allowing mixing with KOH to fix dissolved CO₂. Results showed a 6.1% average error in high-pressure pH measurement. PCS use for sample collection maintained pressure, preventing CO₂ degassing. However, PCS-collected sample alkalinity measurements had larger errors than non-PCS measurements, limiting PCS practicality in monitoring field settings. Nevertheless, PCS could find utility in preprocessing for carbon isotope analysis and other applications. This research not only contributes to the field of CCS monitoring but also suggests potential applications in studies related to natural analogs of CCS, CO₂-rock interaction experiments, core flooding experiments, and beyond.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.429-436
• /
• 2005

In this study, we have compared with the differences between the extent of sampling disturbance and consolidation characteristics by experiments, which are consolidation test and have been performed with Kwang-Yang clay samples. The effects on sampling disturbance to consolidation characteristics of soft clay have been inverstigated by using soil samples obtained from large block sampling and piston sampling methods. Through a few experiments, we've got important results which are that the consoilidation parameter of large block sample(Pc, Cc, Cv) is much larger than the value of parameter of piston sample. We've also found the fact that the large block sample using the large size sampler is much better than piston sample in the quality of goods to lessen the effects on disturbance of sampling. When compared to the parameter of consolidation along with the methods of experiment, we found that the result performed by large size consolidation test is the greatest one and CRS is much better than standard consolidation test to seek for proper parameter.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.95-102
• /
• 1999

It is important to estimate the magnitude of settlement and the time of primary consolidation in geotechnical engineering projects. For these purposes, site explorations and laboratory tests are usually performed. However, the mechanical properties determined from laboratory tests on the samples obtained by different sampling techniques show different trends. In this study, three types of consolidation test were carried out on the soil samples obtained by three different sampling techniques (76mm tube, 76mm piston, and block samples), to verify the effect of sample disturbance on consolidation properties. It was found that sampling methods have influence on the $\varepsilon$ - log $\sigma$'$_{v}$ relationship. While insignificant difference of compression indices from the samples obtained by different sampling techniques was observed in compression region, these values showed a different trend in precompression region. The values of $c_{v}$ and k of block samples had a tendency to be larger than those of piston and tube samples. At consolidation pressure larger than $\sigma$'$_{p}$, however, these properties became similar regardless of sampling methods. The block and piston samples gave slightly higher values of $C_{a/}$ $C_{c}$ than tube samples. In the results of I $L_{EOP}$ and CRS test, it was observed that the values of $\sigma$'$_{p measured}$/$\sigma$'$_{p best estimated}$ of Yang-San clay decreases when strain becomes larger than 1.0% and that precompression strain of block samples is in the range of 1.5~2.0% while those of piston and tube samples are 1.75~3.75%. It was also shown that the values of $\sigma$'$_{p}$ of block samples exceed those of piston and tube samples by about 6~10%.6~10%.%.%.%.%.