• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.733-735
• /
• 2014

The paper deals with the energy transmission ratio of the elastic waves obliquely transmitting through a plate and a pipe. The incidence angle corresponding to the maximum transmission was determined theoretically and considered in the design of ultrasonic transducers for flow velocimetry. Experimentally-obtained transmission ratios were compared with and confirmed the theoretically-calculated results.

• 한국소음진동공학회논문집
• /
• 제25권2호
• /
• pp.124-132
• /
• 2015

The paper deals with the energy transmission of the elastic waves obliquely transmitting and refracting through a plate and a pipe. By calculating the transmitting ratio depending on the incidence angle, the angle corresponding to the maximum transmission was determined theoretically and considered in the design of ultrasonic transducers for flow velocimetry. Experiments were carried out by using prototypes of the transducers. Experimentally-obtained transmission ratios were compared with and confirmed the theoretically-calculated results.

• 한국소음진동공학회논문집
• /
• 제21권7호
• /
• pp.665-673
• /
• 2011

Simplified formulae for axial and bending natural frequencies of a bellows are developed using an equivalent thin-walled pipe model. The axial and bending stiffness of bellows is determined using lumped transfer matrix method. Transfer matrix method which includes the rotary inertia is used to calculate the natural frequencies for axial and lateral vibration. The result from the simplified formula are verified by those from as experiment result and a finite element analysis. This comparisons show good agreement with the each other.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.118-123
• /
• 1996

The purpose of this study is to develop acoustic substructure synthesis method that can be applied to acoustic modal analysis of complex acoustic systems. Acoustic modal analysis method to be introduced here is a method that analyze acoustic natural mode shape of the complex acoustic system by the principle of CMS(component mode synthesis method). This paper describes the acoustic modal analysis of the acoustic finite element model of simple expansion pipe by acoustic substructure synthesis method. The results of acoustic modal analysis analyzed by Acoustic substructure synthesis method and the results, by FEM(finite element method) shows good agreement.

• 한국지반환경공학회 논문집
• /
• 제16권7호
• /
• pp.5-13
• /
• 2015

압입강관말뚝공법은 기초보강, 상부 및 지하 증축, 부등침하 복원 등에 사용되는 공법으로 유압잭을 이용하여 좁은 공간에서 시공이 가능한 기초 보강공법이다. 이 공법의 특징은 협소한 공간, 낮은 층고, 근접 시공이 가능하고, 무소음 및 무진동 공법이며 슬라임을 배출하지 않아서 시공현장을 청결하게 유지할 수 있다. 또한 모든 말뚝을 유압잭의 압입하중으로 시공하므로 시공 중 지지력 확인이 가능하다. 본 연구에서는 압입강관말뚝에 대하여 하중전이시험을 수반한 말뚝 정재하시험을 수행하여 압입강관말뚝의 하중지지 거동 특성을 파악하였다. 그리고 말뚝 시공 후 경과시간에 따른 압입강관말뚝의 지지거동의 변화를 확인하기 위하여 총 4회의 정재하시험을 실시하였다. 재하시험 결과, 압입강과말뚝의 허용지지력은 최소 637kN 이상으로 나타났고, 재하하중의 81~86%를 마찰하중이 지지하는 것으로 나타났다. 그리고 대체적으로 2개월이 경과하면 단위주면마찰력은 최대값에 도달하는 것으로 평가되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권6호
• /
• pp.638-643
• /
• 2013

유압시스템의 출력밀도를 높이기 위해 고압화, 대형화 되고 있으나, 유압동력 발생장치(HPU)를 구동할 때 110 dB(A) 정도의 높은 소음이 발생한다. 최근 산업안전규제 강화와 작업장 환경개선 요구 등으로 인하여 HPU의 소음저감을 위한 방안으로 실외나, 지하에 별도의 설치공간을 만들어 HPU를 이용하는 경우가 있었으나, 배관에서의 작동유 유동마찰로 인한 동력손실과 고장 났을 때 신속하게 대응하는데 문제가 있었다. 본 연구에서는 HPU의 동력변환 과정에서 필수적으로 발생되는 소음을 효과적으로 차폐시키면서 동력손실을 저감시키는 방음챔버(chamber)를 채용하여 소음특성을 개선하는 연구를 실험적으로 하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.715-719
• /
• 2007

Recently, since there appear the quality improvement in both educational and cultural level at the college campus also, thus the lecture room is requiring by the students where the intimacy degree among the students can be raised, also a smoother interaction between the professor and the student is able to be generated. Particularly in case of College of Music, the Practical Technique Training Rooms such as Orchestral Music Room, Pipe Music Concert Room, Music-Part Practice Room are more important for the interaction between Professor and Student or Student attends at the lesson, than the lecture rooms of any other colleges. Likewise, while such music practice room should be designed with consideration of the acoustic characteristics, so as to obtain the feel as if hear it performs at a music hall, but since the most of music practice room was designed with consideration of the convenience of construction work and its economical efficiency only, it has been exposed with many acoustic defects after the completion of construction. Therefore in this thesis, it has grasped the physical acoustic characteristics on the object of the two orchestral music rooms, pipe music concert room and ensemble practice room, among the newly constructed practice rooms of the Music College, W University, and it is considered that it could be utilized as the fundamental data on the base of this material when designing of the college music practice room, for the future.

• 한국소음진동공학회논문집
• /
• 제24권6호
• /
• pp.462-469
• /
• 2014

After drilling operations at the offshore plant, crude oil is producted under high pressure. After that time, oil recovery is reduced, because the pressure of the pipe inside is low during the secondary produce. At that time injection sea water at the pipe inside through water injection pump that the device increase to recovery. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic at the domestic company. 2D model has reliability of analysis results for the uncomplicated model. Also element and the node the number of significantly less than in the 3D model. So, the temporal part is very effective. In addition, depending on the quality of mesh 3D is a real model and FEM model occurs error. So, user needs a lot of skill. In this paper, a 2D finite element analysis was performed through the dynamics analysis and the study model was validated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.495-496
• /
• 2014

The suction method is the substructure installation using the water pressure difference generated by discharging water inside the pile by the pumping operation, after the intrusion by the self-weights of a large hollow steel pipe or a concrete structure. It is known as the low-noise and low-vibration method against the general pile driven method and eco-friendly, also. Most current design and safety assessment of the support structure and considering only the static load, however, the importance of dynamic behavior becomes magnified as the size of wind power generator increases. This study measures the natural frequency of the suction pile prototype about the penetration depth as a part of basic research and analyzed the interaction between the soil and the structure.

• 한국소음진동공학회논문집
• /
• 제25권2호
• /
• pp.90-100
• /
• 2015

Recently, creating a signature sound for a brand has become more important in the automotive industry. It is important to remember that the people inside a vehicle are not the only one, who assess the signature sound, exhaust sound has become a more important factor. Most research has used psycho-acoustic parameter to objectively measure the aesthetic qualities of exhaust sound. However, these results do not parallel the results from subjective analysis. Therefore, this research focused on developing a method for objective quantification to assess the aesthetic qualities of exhaust sound in order to help develop a more appealing signature sound. To do so, the actual exhaust sound was synthesized and subjectively assessed at varied frequencies samples of 30 individuals employed at sejong R&D center. The results were analyzed using the science of harmony scale.