• 한국가스학회지
• /
• 제12권2호
• /
• pp.57-62
• /
• 2008

배관 엘보우의 내호면(intrados)의 과 내부에 국부적으로 두께 감육이 발생한 경우, 내압과 엘보우를 닫는 방향으로의 굽힘하중을 부가하여 파손 모드를 연구하였다. 탄소성해석 시 반력-변위 곡선이 세 그룹으로 나뉘므로 각 그룹의 한 경우씩을 해석하여 소성붕괴에 의한 파손모드의 차이를 확인하였다. 이를 위해 주요 부위에서 하중-국부적응력 곡선이 어떻게 변화하는지 결정하여, 이로부터 관찰된 파손모드와 비교하여 설명하였다. 감육폭이 $90^{\circ}$인 경우 배관은 엘보우 측면부터 소성붕괴가 시작되었으며, $360^{\circ}$인 경우 내호면으로부터 소성변형이 시작되어 서로 다른 파손모드를 보여주었다. 배관의 감육측정에 의한 건전성 평가 시 이와 같은 파손 모드의 차이점을 고려하여 평가를 실시하여야 한다.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.961-970
• /
• 2012

두께가 다른 이종강도 배관 용접부에서 인장, 내압 및 굽힘응력에 대한 하중지지능력을 평가하였다. 1.22, 1.54 및 1.89의 두께비를 갖는 API X65-API X80, API X42-API X65 및 API X42-API X80 배관 용접부를 유한요소해석을 통하여 하중지지능력을 평가하였다. 이종강도 배관의 두께비가 1.5 이하에서 인장강도와 최대모멘트는 면삭각도 변화에 큰 영향을 받지 않으나 두께비가 1.5 이상에서는 큰 영향을 받는다. 저강도 배관의 길이방향 면삭각도와 두께비 변화에 따라서는 내압에 의한 파열압력은 영향을 받지 않는다.

• 한국정보통신학회논문지
• /
• 제25권10호
• /
• pp.1323-1329
• /
• 2021

손 표현 인식을 위해서는 손의 정적인 형태를 기반으로 하는 손 자세 인식과 손의 동적인 움직임을 기반으로 하는 손 동작 인식이 함께 사용된다. 이 논문에서는 손 표현 인식을 위해 손가락의 위치와 형태를 기반으로 하는 계층적 손 자세 모델을 제안한다. 손 자세 인식을 위해서는 오픈소스인 미디어파이프를 기반으로 하고, 손가락 상태를 나타내는 모델과 이를 통해 손 자세를 나타내는 모델을 계층적으로 구성하였다. 손가락 모델 역시 손가락 하나의 굽힘과 손가락 두 개의 닿음을 사용하여 계층적으로 구성하였다. 제안하는 모델은 손을 통해 정보를 전달하는 다양한 응용에 사용할 수 있으며, 수화에서의 숫자 인식에 적용하여 그 유용성을 검증하였다. 제안하는 모델은 수화 인식 이외에 컴퓨터의 사용자 인터페이스에서 다양한 응용이 가능할 것으로 기대한다.

• 한국건설순환자원학회논문집
• /
• 제11권3호
• /
• pp.276-281
• /
• 2023

기존 보통포틀랜드시멘트를 사용하여 제작한 수로관은 시멘트의 수화생성물이 산에 취약한 특성으로 인하여 열화가 빠르게 진행되고 내구성이 저하되는 문제점이 발생되고 있다. 따라서 본 연구에서는 다양한 산업에서 발생되는 산업부산물인 고로슬래그와 플라이 애시를 이용하여 수로관을 제작하고 그 특성을 분석하였다. 실험결과 굳지 않은 콘크리트에서 슬럼프는 플라이애시의 볼베어링작용으로 인해 증가되는 경향을 나타내었고, 공기량은 미연탄분으로 인해 감소되어 내동해성에 대한 대책이 필요할 것으로 나타났다. 또한 압축강도는 증기양생을 통해 초기강도가 증가되었고, 슬래그 50 %이상의 배합에서는 OPC와 동등이상의 결과가 나타났다. 내산성결과는 질량감소율이 5 % 미만으로 나타나 내구성에 우수한 성능을 나타내었고, 벤치플룸의 휨파괴하중도 KS기준을 모두 상회하여 상용화가 가능할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.328-337
• /
• 2005

This work reports results of our study on the dynamic responses of the buried pipelines both along the axial and the transverse directions under various boundary end conditions. We have considered three cases, i.e., the free ends, the fixed ends, and the fixed-free ends for the axial direction, and three more cases including the guided ends, the simply supported ends, and the supported-guided ends for the transverse direction. In order to investigate the effect of the boundary end conditions for the dynamic responses of the buried pipeline, we have devised a computer program to find the solutions of the formulae on the dynamic responses (displacements, axial strains, and bending strains) under the various boundary end conditions considered in this study. The dynamic behavior of the buried pipelines for the forced vibration is found to exhibit two different forms, a transient response and a steady state response, depending on the time before and after the transfer of a seismic wave on the end of the buried pipeline. The former is identified by a slight change in its behavior before the sinusoidal-shaped seismic wave travels along the whole length of the pipeline whereas the latter by the complete form of a sinusoidal wave when the wave travels throughout the pipeline. The transient response becomes insignificant as the wave speed increases. We have observed a resonance when the mode wavelength matches the wavelength of the seismic wave, where the mode number(k) of resonance for the axial direction is found to be $\overline{\omega}/{\pi}V+1/2$ for the fixed-free ends, $\overline{\omega}/{\pi}V+1$ for the free ends, and $\overline{\omega}/{\pi}V$ for the fixed ends, respectively. By adding 10 more modes to the mode number(k) of resonance, we were able to study all the dynamic responses of the buried pipeline for the axial direction. On the other hand, we have not been able to observe a resonance in the analysis for the transverse direction, because the dynamic responses are found to vanish after the seventh mode. From the results of the dynamic responses at the many points of the pipeline, we have found that the responses appeared to be dependent critically on the boundary end conditions. Such effects are found to be most prominent especially for the maximum values of the displacement and the strain and its position.

• 농업과학연구
• /
• 제38권3호
• /
• pp.505-512
• /
• 2011

Structural characteristics for standard models of single-span plastic greenhouse in Korea and high tunnels in North America were analyzed, and comparative analysis for greenhouse environments measuring in Korean farmhouse and Rutgers high tunnel was carried out to find structural and environmental improvements of single-span plastic greenhouses that occupy most of Korean greenhouse. Widths of high tunnels are similar to single-span plastic greenhouses but their heights are high comparatively and their side heights are fairly higher than single-span plastic greenhouses specially. Rafters, which are main frames, section sizes of high tunnels are bigger and their intervals are wider than single-span plastic greenhouses. Relative bending resistances compared with representative Korean greenhouse were analyzed by 0.92 to 1.42 in single-span plastic greenhouses, and 1.38 to 2.96 in high tunnels. Frame ratios of single-span plastic greenhouses were 6.8 to 8.6%, and those of high tunnels were 5.5 to 8.7%. We analyzed air temperatures and solar radiations measured in single-span plastic greenhouse and high tunnel on clear days in late March. There were outside temperatures in generally similar range, and judging by rise of indoor temperatures, ventilation performance of high tunnel is more excellent than single-span plastic greenhouse. Solar radiations of two areas were no big difference but light transmittance of high tunnel was a little bit higher than single-span plastic greenhouse. Single-span plastic greenhouses are disadvantageous in environmental managements such as ventilation performance and light transmittance because distance between greenhouses is too narrow and length of greenhouse is too long compared to high tunnels. To get the environmental improvement effects as well as to increase the structural resistance of single-span plastic greenhouses are achievable by widening the width of greenhouse in possible range, widening the space between rafters, and enlarging the section size of rafters. Also, we need to secure enough distance between greenhouses and to restrict the length of greenhouse by maximum 50 m in order to improve the ventilation performance and the light transmittance.

• Earthquakes and Structures
• /
• 제24권6호
• /
• pp.455-475
• /
• 2023

The present study investigates the non-linear soil-pile interaction using three-dimensional (3D) non-linear finite element models. The numerical models were validated by using the results of extensive pile load and shaking table tests. The pile performance in liquefiable and non-liquefiable soil has been studied by analyzing the liquefaction ratio, pile lateral displacement (LD), pile bending moment (BM), and frictional resistance (FR) results. The pile models have been developed for the different ground conditions. The study reveals that the results obtained during the pile load test and shaking cycles have good agreement with the predicted pile and soil response. The soil density, peak ground acceleration (PGA), slenderness ratio (L/D), and soil condition (i.e., dry and saturated) are considered during modeling. Four ground motions are used for the non-linear time history analyses. Consequently, design charts are proposed depended on the analysis results to be used for design practice. Eleven models have been used to validate the capability of these charts to capture the soil-pile response under different seismic intensities. The results of the present study demonstrate that L/D ratio slightly affects the lateral displacement when compared with other parameters. Also, it has been observed that the increasing in PGA and decreasing L/D decreases the excess pore water pressure ratio; i.e., increasing PGA from 0.1 g to 0.82 g of loose sand model, decrease the liquefaction ratio by about 50%, and increasing L/D from 15 to 75 of the similar models (under Kobe earthquake), increase this ratio by about 30%. This study reveals that the lateral displacement increases nonlinearly under both dry and saturated conditions as the PGA increases. Similarly, it is observed that the BM increases under both dry and saturated states as the L/D ratio increases. Regarding the acceleration histories, the pile BM was reduced by reducing the acceleration intensity. Hence, the pile BM decreased to about 31% when the applied ground motion switched from Kobe (PGA=0.82 g) to Ali Algharbi (PGA=0.10 g). This study reveals that the soil conditions affect the relationship pattern between the FR and the PGA. Also, this research could be helpful in understanding the threat of earthquakes in different ground characteristics.

• 한국지반공학회논문집
• /
• 제22권6호
• /
• pp.71-82
• /
• 2006

NATM 터널의 갱구부와 갱내의 연약층 구간에는 굴착 보조공법으로 대부분 강관이나 유리섬유보강(Fiber-glass Reinforced Plastic)관에 의한 그라우팅공법이 적용되고 있다. RPUM이나 UAM으로 알려져 있는 이러한 공법으로 굴착전 막장면 천단을 선보강하여 굴착 시 주변지반의 안정을 확보할 수 있다. 특히 지반이 연약하여 자립이 어려운 경우 최근에는 막장면 천단 뿐 아니라 막장면 수평보강을 실시하여 터널 및 주변지반의 안정성을 확보하는 추세에 있다. 이러한 막장면 천단 및 수평보강 형태에 따른 보강효과는 현재 일부 수치해석적 방법과 실내 축소모형실험에 의해 연구된 바 있으나, 이러한 연구들은 복잡한 경계조건을 필요로 할 뿐 아니라 실제 터널굴착 및 보강단계를 적절히 모사할 수 없는 단점이 있다. 따라서 본 연구에서는 실제 RPUM시공을 재현하는 실대형 모형실험을 행하였다. 본 실험은 대형 토조를 제작하고 단계별 굴착과 상재하중을 재하하여 사질토지반 내 터널 천단보강 및 막장면 수평보강형태(무보강, 천단보강, 천단보강+막장면 수평보강, 막장면 수평보강)에 따른 막장면 주변지반 보강효과를 살펴보았다. 실험결과, 막장면 수평보강만으로도 주변지반 침하와 터널 반경방향 변위에 대한 상당한 억제효과를 확인할 수 있었다. 굴진방향과 평행한 종방향의 연직응력 변화를 측정한 결과 막장면 전방 $0.5D{\sim}1.0D$ 지반에 응력이 집중되어 막장면 선행보강의 필요성이 입증되었다. 천단보강재인 FRP관의 축력과 휨모멘트를 측정한 결과 대부분이 막장면으로부터 0.75D 위치에서 최대값이 측정되어 천단보강재 최소길이는 1.0D이상이 되어야 할 것이다. catalase와 peroxidase는 SOD나 APX는 달리 단일 밴드 또는 주요 밴드가 있고 높은 활성을 보여 정제시 유리하게 작용할 것으로 보인다. prospects will be also discussed.behaviors to ferromagnetic behavior was observed. Tunneling barrier called "decay length for tunneling" for the films having the thickness of Co layer from 1.4 to 1.6 nm was measured to be ranged from 0.004 to 0.021 ${\AA}$$\^$-1/.문에 기업간 관계를 연구하는 측면에서는 탐험적 연구성격이 강하다. 더 나아가 본 산업의 주된 연구가 질적이고 기업내부만을 연구했던 것에 비교하면 시초적이라고 할 수 있다. 또한 관계마케팅, CRM 등의 이론적 배경이 되고 있는 신뢰와 결속의 중요성이 재확인하는 결과도 의의라고 할 수 있다. 그리고 신뢰는 양사 간의 상호관계에서 조성될 수 있는 특성을 가진 반면, 결속은 계약관계 초기단계에서 성문화하고 규정화 할 수 있는 변수의 성격이 강하다고 할 수가 있다. 본 연구는 복잡한 기업간 관계를 지나치게 협력적 측면에서만 규명했기 때문에 많은 측면을 간과할 가능성이 있다. 또한 방법론적으로 일방향의 시각만을 고려했고, 횡단적 조사를 통하고 국내의 한 서비스제공업체와 관련이 있는 컨텐츠 공급파트너만의 시각을 검증했기 때문에 해석에서 유의할 필요가 있다. 또한 타당성확보 노력을 기하였지만 측정도구 면에서 엄격한 개발과정을 준수하지는 못했다

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.