• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.104-110
• /
• 2006

We investigated why aspen extractives are more resistant in kraft pulping than pine extractives. Residual extractives content in aspen kraft pulps were 0.5~1.1% compared with 0.1~0.2% in pine pulps. This different response arises from the different composition of extractives in wood chips. Resin acids in pine were almost completely removed in kraft pulping but those are not existence in aspen. Slower saponification of aspen steryl esters resulted from different chemical structure of aspen steryl esters. Main sterols in aspen steryl esters were 24-methyl cyclolanostenol which was highly resistant to alkaline hydrolysis with its characteristic steric hindrance. Sterols in aspen were not well removed in kraft pulping. The relative composition of sterol in aspen kraft pulps was increased with increasing pulping time. The presence of fatty acids in aspen kraft pulps is considered to unusual. Fatty acids in alkaline are supposed to be well ionized and removed well in the washing stage. Nevertheless, there were significant amount of fatty acids remaining in aspen kraft pulps.

• Journal of the Korea Furniture Society
• /
• v.26 no.2
• /
• pp.122-129
• /
• 2015

In previous study, VOC emission characteristics of coating materials for wood finishing were conducted and results showed that eco-friendly products has about 15~46% lower TVOC emission than typical products. In this study, lower TVOC emitted coating materials were applied on pine and then changes of VOC emission characteristics from pine with treatments were determined. Non-treated pine emitted $604.7{\mu}g/m^2h$ of TVOC that contained 66% of NVOC ($399.7{\mu}g/m^2h$). However, $V_2$ finished pine showed no NVOC emission rather than AVOC emission that consisted of Toluene, Ethylbenzene, m,p-Xylene, o-Xylene, 1,2,4- Trimethylbenzene. All coating materials inhibited ${\alpha}$-Pinene emission which originally from pine, but waterborne stain ($W_1$ and $W_3$) showed lower disruption of that emission. Moreover, $W_3$/wood showed higher NVOC emission such as ${\alpha}$-Terpinol, Terpinen-4-ol which are known as antioxidant substrates. Based on results, VOC emission characteristic of pine was significantly affected by coating materials with negatively in terms of ${\alpha}$-Pinene emission or positively in terms of NVOC emission. Therefore, coating material is important factor for indoor air quality when it would apply on wood products. For the future study, VOC emission characteristic of coated wood will be conducted continuously.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.3
• /
• pp.1-7
• /
• 1989

This study was performed to obtain the optimal condition that hydrolyzed exploded pine(Pinus densiflora), oak(Quercus serrata) and birch wood(Betula platyphylla var. japonica) by using sulfuric acid. The results obtained were summarized as follows: In hydrolysis of wood meal with sulfuric acid. maximum yield of sugar appeared that pine was 12 hours. oak and birch were 24 hours with 65% sulfuric acid. Futhermore, when wood meal and exploded woods were hydrolyzed with 65% sulfuric acid at $23^{\circ}C$ for 6 hours(primary hydrolysis), diluted to 3% and hydrolyzed again at $100^{\circ}C$ for 2 hours(secondary hydrolysis), the maximum sugar yield of wood meals were 6 hours. those of higher steam exploded pine wood was 3 hours. of lower steam exploded oak and birch woods were 6 hours. The sugar analyses of exploded wood showed that the amount of arabinose and xylose residue rapidly decreased. content of nemicelluose decreased with increase of steaming time and pressure.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.1-6
• /
• 1996

This study was performed to investigate the feasibility of using sonic stress-wave technique in the longitudinal direction for the assessment of incipient decay of radiata pine wood. Decayed bending specimens by Tyromyces palustris and Gloeophyllum trabeum for varoious periods were tested nondestructively using stress-wave technique in the longitudinal direction and destructively. Decay detection, quantitative assessment of decay, and the prediction of residual strength of decayed wood with less than five percent weight loss can be feasible using stress-wave parameters (wave velocity, wave impedance, stress-wave elasticity) measured by stress-wave technique in the longitudinal direction and their percent reduction due to decay.

• Journal of the Korea Furniture Society
• /
• v.19 no.4
• /
• pp.229-234
• /
• 2008

In a previous study, it was revealed that three major softwoods, Japanese pine, Korean pine and Japanese larch, heat-treated at $220^{\circ}C$, could produce high quality dark-colored boards. It is known that heat treatment decreases the hygroscopicity of wood. The hygroscopicity of major domestic softwoods and hardwoods heat-treated at $220^{\circ}C$ was investigated by a saturated salt solution method and compared with that of black and white charcoals. Equilibrium moisture contents of wood decreased with the increase of heat treatment time. Isotherm shapes of wood species were different from those of charcoals. Heat treatment decreases the equilibrium moisture contents of black locust more than those of Korean pine and Japanese larch. It was found that surface hardness of wood is improved by heat treatment to a certain extent, but a longer heat treatment causes thermal degradation, resulting in the decrease of the surface hardness.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.58-67
• /
• 2014

We investigated the mechanical properties of Korean red pine (Geumgangsong, Pinus densiflora forma erecta Uyeki) of Uljin province in Korea as a basic research to investigated the material properties. Compressive strength of Korean red pine was $36.2N/mm^2$, which was slightly lower than the pine (Pinus densiflora S. et Z.) in Korea. The compressive strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. Bending strength of Korean red pine was $76.5N/mm^2$, which was slightly higher than the pine (Pinus densiflora S. et. Z.) and nut pine (Pinus koraiensis) in Korea. Similar to the compressive strength, bending strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. On the other hand, the shearing strength showed the maximum value at part of including the pith. This result does not coincide with the results of compressive and bending strength, in consideration of the specific gravity, which is consistent. Surface hardness of Korean red pine was $43.7N/mm^2$ in cross section, $12.0N/mm^2$ in radial section and $13.7N/mm^2$ in tangential section respectively. The mechanical properties of Korean red pine were similar to the pine and nut pine having a similar specific gravity. The mechanical properties were greatly affected on the specific gravity than the annual ring width.

• Korean journal of applied entomology
• /
• v.57 no.1
• /
• pp.7-13
• /
• 2018

Currently, there is no available tool that rapidly diagnoses pine wood nematode (PWN)-infected pine trees in the field. In this study, we synthesized and purified PWN Galectin, which might be an antigen specific to PWN, using the Baculovirus expression system. We used PWN Galectin as an antigen for generating 1,464 fusion hybridoma cell lines secreting monoclonal antibodies (Mabs). Among them, we selected 62 fusion hybridoma cell lines showing high reactivity to PWN Galectin. We further selected 12 fusion hybridoma cell lines showing high reactivity to the standard PWN-infected pine tree phosphate buffered saline (PBS) extract. Additionally, two fusion hybridoma cell lines showing no or extremely low reactivity were used as controls. The selected fusion hybridoma cell lines were subjected to limiting dilutions for selecting and establishing Mab-secreting cell lines showing higher reactivity to the standard PWN-infected pine tree extract than to the standard normal pine tree PBS extract. Moreover, the selected fusion hybridoma cell lines were further selected based on their higher reactivity to PWN protein extracts than to three non-pathogenic nematode protein extracts. The Mab-secreting cell lines established in this study could be used to develop rapid diagnostic tools that can be used in the field or in laboratories for detecting PWN-infected pine trees or PWN.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.390-397
• /
• 2011

In this study, bending test was conducted as beam members in timber roadside safety barrier. The flexural properties of pitch pine round timber according to the diameters were evaluated. And then grading based on the growth characteristics applied to choosing the pitch pine round timbers which is met the criteria of guideline (Japan, 2008). MOR of round timber 160 mm is higher than other specimens from 100 mm to 140 mm. Because of lower juvenile wood ratio and higher density. The MOE of round timber is decreased according to the increment of diameter. Only 32% of the specimens has passed the limitations. Performance of pitch pine round timbers has confirmed to suitability roadside safety beam members according to the guideline (Japan, 2008).

• Journal of Korean Society of Forest Science
• /
• v.94 no.5 s.162
• /
• pp.334-337
• /
• 2005

Pine wood nematode isolates from Haman, Gyoungsangnam-do were cryopreserved with three different cryoprotectants (glycerol, ethylene glycol and dimethylsulfoxide), Nematode Growth medium (NGM) and M 9 buffer solution, respectively, and then survival rate, reproduction ability, and pathogenicity of stored nematodes were compared. Survival rates of juvenile was excellent in 15% glycerol solution as $72{\pm}5.3%$. The survival ability of nematodes at juvenile stage was more efficient than that of nematodes at adult stage. Pre-incubation treatment at $4^{\circ}C$ before storing in liquid nitrogen didn't affect the survival ability of pine wood nematode. When the reproduction ability of nematodes was confirmed on Botrytis cinerea agar plates at $28^{\circ}C$ incubator, there was no difference between cryopreserved and non-cryopreserved. Pathogenic ability of cryopreserved nematodes was also evaluated and confirmed by artificially inoculating them on 2-year old red pine seedlings.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.512-518
• /
• 2015

Pine wilt disease (PWD) caused by pine wood nematode, Bursaphelenchus xylophilus, has become the most serious threat to pine trees in Korea. This study was subjected to investigate effective biological control agent against PWD. To select nematocidal bacteria against PWD, Bacillus licheniformis MH48 was selected among five bacteria due to its high nematocidal potential. B. licheniformis MH48 was tested for cell growth and protease activity to evaluate its nematicidal potential. In the B. licheniformis MH48, cell numbers were highest three days after incubation, while protease activity was highest after seven days. In the effect of different concentrations of B. licheniformis MH48 culture broth against B. xylophilus, 20% concentration of culture broth showed approximately 80% of pine wood nematode mortality compared to the control. Especially, pine wood nematode's cuticle layers were degraded two days after treatment of B. licheniformis MH48 culture broth. The present study suggests that B. licheniformis MH48 can be one of the potential biocontrol candidates against pine wood nematode due to its ability to produce protease.