• 제목/요약/키워드: Pine wood

검색결과 659건 처리시간 0.027초

폭쇄법을 이용한 목질계 바이오매스의 종합적 이용 (III) - 소나무와 신갈나무 폭쇄재로부터 셀룰로오스 아세테이트의 제조 - (Total Utilization of Woody Biomass by Steam Explosion (III) - The Preparation of Acetate from Pine and Oak Exploded Wood -)

  • 이종윤;장준복;양재경
    • Journal of the Korean Wood Science and Technology
    • /
    • 제23권2호
    • /
    • pp.26-31
    • /
    • 1995
  • Acetylcellulose(AC) was prepared with steam exploded wood(EXW) and EXW after delignification with sodium chlorite, pine (Pinus densiflora) and oak (Quercus mongolica) woods. The color of acetylated pine and oak exploded wood was brown, degree of substitution(D.S) of pine was 1.47~2.09, and this of oak was 1.49~2.29. The hemicellulose content of acetylated pine and oak exploded wood was 0~3.4% and 1.49~11.3%, individually. The degree of substitution of acetylated wood prepared from delignified EXW in the pine and oak wood was 0.50~0.71 and 0.70~0.88, individually. Hemicellulose content of acetylated EXW with sodium chlorite after delignification in the pine and oak wood was less than 1% and 0.6~2.5%. The color of acetylated wood after delignification was white. IR-spectra of acetylated pine and oak EXW after delignification were found that peaks at around 1740$cm^{-1}$ and 1200$cm^{-1}$ increase markedly, due to ester carbonyl group.

  • PDF

멜라민수지 함침지 적층에 의한 소나무재의 표면 강화 (Surface Hardening of Pine Wood by Laminating of Melamine Resin Sheet)

  • 한규성
    • 한국가구학회지
    • /
    • 제17권1호
    • /
    • pp.83-89
    • /
    • 2006
  • Because the surface of pine wood is very soft, there have been many attempts, like as surface coating, resin impregnation, and densificationt, to harden the surface of wood for its interior use. This study was carried out for surface hardening of pine wood by laminating of melamine resin sheet. The effect of laminating method on the characteristics of melamine resin sheet-laminated wood(MLW) was investigated. Flat-sawn softwoods were suitable for MLW making. And the pre-drying of wood at $105^{\circ}C$ for 30min, before laminating, was effective for preparing of defect-free MLW. The abrasion resistance of pine wood was greatly improved by laminating of melamine resin sheet on its surface. Consequently, the laminating of melamine resin sheet was proved to be a favorable method for improvement of surface abrasiveness of pine wood.

  • PDF

Douglas-fir, Hemlock, Radiata pine 정각재의 고온건조 특성에 관한 연구 (Studies on the High-Temperature Drying Characteristics of Douglas-fir, Hemlock and Radiata Pine Square Timber)

  • 이창진;이남호;오승원
    • Journal of the Korean Wood Science and Technology
    • /
    • 제44권5호
    • /
    • pp.726-735
    • /
    • 2016
  • 본 연구는 두께 15 cm와 18 cm 크기 Douglas-fir, Hemlock, Radiata pine 정각재의 고온건조 특성을 평가하기 위해 수행되었다. 수종에 따른 최종함수율은 시험재의 두께에 관계없이 Radiata pine, Douglas-fir, Hemlock 순으로 Radiata pine에서 가장 낮았으며, 배할처리를 하였을 때 무처리재보다 낮은 함수율을 나타내었다. Radiata pine과 Hemlock의 경우 배할처리를 하였을 때 함수율과 뒤틀림 발생을 감소시키는 효과가 있는 것으로 나타났다. Douglas-fir는 수를 포함하지 않는 정목형태로 가공될 때 건조결함의 감소가 가능하였다.

청변균 및 살균제처리재의 펄프화특성 (Pulping Features of Blue-stained and Fungicide-treated Woods)

  • 조남석;정선화
    • 펄프종이기술
    • /
    • 제37권3호
    • /
    • pp.66-73
    • /
    • 2005
  • This study was performed to understand the changes in wood extractives, mainly acetone extracts, in pine woods (Pinus densiflora and Pinus rigida) treated by three blue stain fungi (BSF) such as native BSF in Korea, Leptographium sp., screened Albino strain(BSFcs-1) and commercial Cartapip and fungicide, Wood guard. In addition their pulping and bleaching properties were investigated. BSF treatment has significantly reduced acetone extracts, $25.1{\sim}30.4%$ decreasing in red pine and $22.9{\sim}28.1%$ in pitch pine. Three week aging treatment showed about 20% decreasing in red pine and 19.3% in pitch pine. There were not so significant differences in extracts reduction among native BSF and Albino-type strains (Albino strain, BSFcs-1, and commercial Cartapip). But fungicide, Wood guard, treated wood showed relatively lower decreasing rates of extractives, 14% in red pine and 10.1% in pitch pine. Therefore it is understandable that the fungicide could protect the wood from blue stain fungi attack, but has no effect on its extractive reduction. Concerned to pulping properties of BSF and fungicide treated woods, red pine and pitch pine, optimum pulping condition was 20% active alkali, wood to liquor ratio 1 to 6, $170^{\circ}C$, and 2.5 hr. In the case of BSF woods, optimum pulping condition was same as the sound wood, $43.5{\sim}45%$ of pulp yields and $1.3{\sim}1.45%$ of rejects. Screened pulp yield of fungicide treated wood was lower than those of BSF treated woods. Rejects in pulps were higher in fungicide-treated wood than BSF treated woods. Bleaching pulp yields were ranged of 92 to 93.5%. BSF, Cartapip and fungicide treated woods resulted in lower brightness of $55{\sim}58%$, but Albino-type strain(BSFcs-1) $61.3{\sim}62.3%$, very similar to untreated one. Therefore bleaching chemicals could be saved in the processing of chemical pulping.

Fungi Isolated from Pine Wood Nematode, Its Vector Japanese Pine Sawyer, and the Nematode-Infected Japanese Black Pine Wood in Korea

  • Hyun, Min-Woo;Kim, Ji-Hye;Suh, Dong-Yeon;Lee, Seung-Kyu;Kim, Seong-Hwan
    • Mycobiology
    • /
    • 제35권3호
    • /
    • pp.159-161
    • /
    • 2007
  • Pine tree death caused by pine wood nematode(PWN) involves phoretic relationships between PWN and its vector Japanese pine sawyer beetle(JPS). In an effort to understand the diversity of fungi involved in PWN life cycle, a total of 176 fungal isolates were collected from PWNs, adults and larvae of JPS, PWN-diseased Japanese black pine that was cut down in 2005 at Jinju, Korea. Based on microscopic observation and colony morphology, and sequence analysis of the ITS rDNA, the fungal isolates were identified at the level of genus. Three genera including Mucor, Ophiostoma, and Penicillium were identified from PWN. Two genera of Ophiostoma and Penicillium were discovered from JPS larvae. Frpm JPS adult beetles, nine genera of Aspergillus, Gibberalla, Hypocrea, Irpex, Leptosphaeria, Ophiostoma, Penicillium, and Plectosphaerella and unknown basidio-mycetes were found. Ten genera from PWN-infected weed were confirmed as Bionectria, Botrytis, Camarops, Fusarium, Hypocrea, Nectria, Mucor, Ophiostoma, Penicillium, and Trichoderma. Penicillium and Ophiostoma were commonly distributed on PWN and its vector and host. This is first report of the fungi associated with PWN and its vector and host in Korea.

폭쇄법(爆碎法)을 이용(利用)한 목질계(木質系) biomass의 종합적(綜合的) 이용(利用)(II) -폭쇄재(爆碎材)로부터 Carboxymethyl cellulose의 제조(製造)- (Total Utilization of Woody Biomass by Steam Explosion(II) -The Preparation of Carboxymethylcellulose from Exploded Wood-)

  • 한상열;장준복;이종윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제22권2호
    • /
    • pp.30-36
    • /
    • 1994
  • Steam explosion process is one of the most efficient, pretreatment method for the utilization of lignocellulosic biomass. The carbxymethyl-cellulose(CMC) was prepared with steam exploded wood(EXW), pine(Pinus densiflora) and oak(Quercus mongolica), by standard method using isopropyl alcohol and monochloroacetic acid. The range of water solubility of carboxymethylated pine exploded wood was 45.2~66.8 % and those of oak was 60.7~84.7 %. The degree of substitution(D.S) of carboxymethylated pine exploded wood was 0.11~0.33 and oak exploded wood was 0.48~0.76. The color of carboxymethylated pine and oak exploded wood was brown-black. When carboxymethylated EXW was purified by sulfuric acid, the yield of carboxymethylated wood was lower than non-treated one. However, the color was still brown-black although after delignification. In carboxymethylated EXM prepared after delignification, the water solubility and degree of substitution(D.S) of pine were 81.4~95.9 % and 0.71~0.79, and those of oak were 76.2~89.5 % and 0.79~1.05. The values were higher than non-treated. The degree of substitution of purified carboxymethylated wood prepared with delignified EXM, pine and oak were 0.50~0.71 and 0.70~0.88. The color of carboxymethylated wood was white. In carboxymethylated wood preparde after delignification of EXM, swelling ratio and water retention value of pine were 95.9~96.5 and 580.0~751.2, those of oak were 76.2~89.5 and 124.3~307.6.

  • PDF

울진 금강송재의 재질: 수지구 및 방사조직의 출현형태 (Property of Uljin-Geumgangsong Wood (Pinus densiflora forma erecta Uyeki): Appearance Pattern of Resin Canal and Ray)

  • 김동우;황성욱;이원희
    • Journal of the Korean Wood Science and Technology
    • /
    • 제42권1호
    • /
    • pp.78-87
    • /
    • 2014
  • 울진산 금강송재의 재질발현 수령의 판단기준에 대해 검토하기 위해, 소나무(Pinus densiflora Sieb. et Zucc.)와 울진금강송(Pinus densiflora forma erecta Uyeki) 대표목의 물리적 성질을 조사한 결과, 다음과 같은 결과를 얻었다. 울진금강송의 기건밀도는 소나무재보다 약 20% 이상 높았다. 또한 심재율은 70% 이상이었다. 단위면적($1mm^2$)당 수직수지구의 분포수는 0.3개로서 울진금강송이 소나무보다 약 40% 높았다. 수직수지구의 평균 직경은 소나무 $67.8{\mu}m$, 울진금강송 $67.3{\sim}69.9{\mu}m$로서 수종 간 큰 차이는 없었으며, 연륜수가 증가함에 따라 직경도 함께 증가하는 경향이 나타났다. 수평수지구의 분포수는 울진금강송-1이 소나무와 울진금강송-2 보다 약 55% 높은 값을 나타내었다. 소나무와 울진금강송-2의 수지구 분포수는 연륜이 증가함에 따라 감소하였으나, 울진금강송-1은 연륜 증가와 함께 증가하는 상반된 결과를 나타내었다. 방사조직 분포수는 수종 간의 뚜렷한 차이가 나타나지 않았으며, 동일 수종 내 조재와 만재 사이에서도 차이가 없었다. 연륜이 증가함에 따라 소나무와 울진금강송 모두 방사조직의 분포수가 감소하였다. 방사조직의 세포고는 소나무가 비교적 높았으며, 조재와 만재 사이의 차이는 없었다. 본 연구결과, 울진금강송의 재질발현 기준 수령은 약 150년인 것으로 판단되었다.

소나무재선충 감염 소나무의 목재해부학적 특성 (Wood Anatomical Characteristics of Domestic Red Pine (Pinus densiflora) Infested by Pine wood Nematode (Bursaphelenchus xylophilus))

  • 안세희;전문장;엄영근;오세창;이미림
    • Journal of the Korean Wood Science and Technology
    • /
    • 제39권1호
    • /
    • pp.15-20
    • /
    • 2011
  • 소나무재선충병은 우리나라의 대표 수종인 소나무를 괴사시키는 주요 산림병의 하나로 재선충의 침입과 수체내에서의 이동 경로 파악은 이들의 서식 형태를 구명하는데 매우 중요하다. 따라서 본 연구에서는 감염목 내에서의 재선충 주요 서식 부위와 이동 경로를 명확히 구명하기 위해 재선충 피해목에 대한 현미경적 조사를 수행하였다. 그 결과 피해목의 특징으로는 횡단면, 방사단면, 접선단면 모두에서 주로 방사조직이 감염을 통해 진하게 착색된 것으로 드러났으며 수지구에서도 집중적인 피해가 관찰되었다. 또한 형성층과 가까운 변재 부위에서는 연륜을 따라 접선방향으로 연속 배열된 상해수지구로 보이는 특징이 관찰되었다. 재선충은 방사가도관보다는 방사유세포에서 그리고 수평수지구를 지니지 않는 단열방사조직보다는 수평수지구를 지니는 방추형방사조직에서 훨씬 더 많은 재선충이 발견되었으며 방사조직에서 가도관으로 이동하는 선충도 관찰되었다. 방사조직에서 가도관으로의 이동 시 가도관의 벽을 천공한 다음 이동하거나 크기가 작은 개구부인 측벽의 유연벽공을 통해 이동하기보다는 크기가 큰 개구부인 창상 직교분야벽공을 이동 통로로 삼는 것으로 사료되었다.

오존 처리에 의한 소나무 목분의 화학적 성상 변화 (Chemical Characteristics of Ozone Treated Pine Wood Meal)

  • 김강재;엄태진
    • 펄프종이기술
    • /
    • 제43권1호
    • /
    • pp.23-28
    • /
    • 2011
  • The pine wood meal was ozonated in acidic water. A 91.3% of lignin and 13% of polysaccharides in pine wood meal were degraded with 180 min ozonation. The phenolic hydroxyl groups of lignin in ozonated wood meals were increased with ozonation time. The vanillin content in nitrobenzene oxidation products of lignin is decreased with 10 min. ozonation and it was slightly increased with ozonation time. The sugar composition of ozonated wood meals showed that the hemicellulose was more susceptible to ozonation than cellulose. The crystallinity of ozonated wood meal was increased.

Properties of Porous SiC Ceramics Prepared by Wood Template Method

  • Ha, Jung-Soo;Lim, Byong-Gu;Doh, Geum-Hyun;Kang, In-Aeh;Kim, Chang-Sam
    • 한국세라믹학회지
    • /
    • 제47권4호
    • /
    • pp.308-311
    • /
    • 2010
  • Porous SiC samples were prepared with three types of wood (poplar, pine, big cone pine) by simply embedding the wood charcoal in a powder mixture of Si and $SiO_2$ at 1600 and $1700^{\circ}C$. The basic engineering properties such as density, porosity, pore size and distribution, and strength were characterized. The samples showed full conversion to mostly $\beta$-SiC with good retention of the cellular structure of the original wood. More rigid SiC struts were developed for $1700^{\circ}C$. They showed similar bulk density ($0.5{\sim}0.6\;g/cm^3$) and porosity (81~84%) irrespective of the type of wood. The poplar sample showed three pore sizes (1, 8, $60\;{\mu}m$) with a main size of $60\;{\mu}m$. The pine sample showed a single pore size ($20\;{\mu}m$). The big cone pine sample showed two pore sizes (10, $80\;{\mu}m$) with a main size of $10\;{\mu}m$. The bend strength was 2.5 MPa for poplar, 5.7 MPa for pine, 2.8 MPa for big cone pine, indicating higher strength with pine.