• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.338-341
• /
• 2018

This study investigated the possibility of using pine tree sawdust in thinning-out tree as a substitute for poplar and douglas-fir tree sawdust in oyster mushroom cultivation. Mycelial growth was 10.8 cm in medium supplemented with 70% pine sawdust after 18 days of culture and 10.2 cm in control medium. Mycelial density showed high density with no significant difference between treatments. Fresh weight and diameter of fruiting bodies were slightly lower in medium supplemented with pine tree sawdust. The hardness of pine tree sawdust was slightly higher in the medium supplemented with 20% and 30% of pine tree sawdust. The L value showed a tendency to be higher in the pine added medium, but the a and b values d id not show any significant difference between the treatments. The yields of fruiting body were 157 g / 850 ml for the control and 170 g / 850 ml for the 40% added pine tree sawdust.

• Clean Technology
• /
• v.22 no.4
• /
• pp.286-291
• /
• 2016

In this study we made fuel pellet from miscanthus biomass and investigated changes of physiological characteristics and electricity consumption of pelletizing process in comparison with fuel pellet made of pine sawdust. We also examined combustion characteristics including ash content and clinker forming ratio with fuel pellet made of mixing with micanthus biomass and lime powder. Bulk density of ground-miscanthus and pine sawdust were $158g\;L^{-1}$ and $187g\;L^{-1}$, respectively. Bulk density of ground miscanthus was lower than that of pine sawdust, but increased to $653g\;L^{-1}$ after pelletizing, which was similar to $656g\;L^{-1}$ of pine sawdust pellet. Moisture content in raw miscanthus and ground miscanthus were 17.0% and 11.8%, respectively. Moisture content in ground miscanthus was similar to that of pine saw dust and decreased to 6.73% after pelletizing, which was 7.7% lower than that of pine sawdust pellet. Although $27kWh\;ton^{-1}$ were required for compaction press that was an additional process in miscanthus pelleitizing, total required electricity was $193kWh\;ton^{-1}$ which was similar to $195kWh\;ton^{-1}$ of pine sawdust pellet pelleitizing. Pellet durability and pelletizing ratio of miscanthus were 98.0% and 99.7%, respectively, which were similar to 98.1% and 99.4% of pine sawdust pellet. When lime mixing ratio increased, ash melting degree and clinker forming ratio of miscanthus pellet increased. While higher heating value and clinker forming ratio of miscanthus pellet decreased.

• Journal of Mushroom
• /
• v.21 no.3
• /
• pp.110-117
• /
• 2023

Cordycepin (3'-deoxyadenosine) is a nucleoside analog known for its diverse range of biological activities. This study investigated the effect of different types of sawdust on the production of the bioactive compound cordycepin. The results of the study showed that different types of wood sawdust affected the biosynthesis of cordycepin and a significant increase was observed when the conventional SDB medium was replaced with 1% NaOH treated pine sawdust. To optimize cordycepin production from Paecilomyces tenuipes in a medium containing 1% NaOH-pretreated pine sawdust, we employed Response Surface Methodology (RSM) in its Box-Behnken design (BBD) canonical form. The optimal conditions were determined as follows: a particle size of 109.5111-mesh (140 ㎛) for 1% NaOH-pretreated pine sawdust, an input weight of 21.1679 g/L, and an incubation time of 73.8423 hours. According to our model, this combination is expected to yield a maximum cordycepin content of 896.1428 ㎍/mL. Experimental validation of this prediction was performed using the suggested optimal conditions, resulting in an average cordycepin content of 922.6771 ㎍/mL across three replicates, thus confirming the model's accuracy.

• Mycobiology
• /
• v.32 no.4
• /
• pp.190-193
• /
• 2004

Six strains of Sparassis crispa such as S. crispa DUM-01, DUM-02, DUM-03, DUM-04, DUM-05, and DUM-06 were tested for their mycelial growth on 6 different kinds of sawdust media and primordial formation on 10 different compositions of larch sawdust media. The highest mycelial growth was recorded on the larch sawdust. Of the 6 strains of S. crispa, S. crispa DUM-04 recorded the favorable formation of primordia. The primordial formation of S. crispa DUM-04 was more favorable on L-3 medium than 9 kinds of larch sawdust media. When S. crispa DUM-04 was cultured on the media of larch sawdust+pine sawdust, the formation of its fruiting bodies was more outstanding on the media of larch sawdust+pine sawdust than those of larch sawdust.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.857-871
• /
• 2017

The major substrates used in soilless growing media are peat moss and perlite, where peat moss is a limited and expensive natural resource. Determination of appropriate substrates based on technical and economic feasibility is the vital aspect of research and the key to success in any soilless production system. This research work was performed to evaluate different low-cost and sustainable alternative substrate as soilless growing media for horticulture plant. The objective of this study was to compare the effect of sawdust species and steam treatment, for physico-chemical properties and growth of horticultural plant. This study involves the physical and chemical characterization and growth test of four substrate (pine sawdust, oak sawdust, steamed pine sawdust and steamed oak sawdust) in order to evaluate their use as components of growing media. Steamed oak sawdust ($121^{\circ}C$, 30 min) showed adequate physical and chemical properties compared to peat moss for their use as growing media. The growing media were prepared using different mixture proportion to grow Brassica campestris L., Festuca arundinacea and Lespedeza cyrtobotrya Miq. The highest germination, stem length and leaf area of Brassica campestris L., Festuca arundinacea and Lespedeza cyrtobotrya were observed in 30 minute steamed oak sawdust mixture growing media. The steam treatment condition of sawdust used in the growing media significantly positive affected the germination, the stem length and the leaf area.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.2
• /
• pp.23-28
• /
• 2007

Wood fuel must be dried before combustion to minimize the energy loss. Sawdust of Japanese red pine was dried in a direct contact thermal screw dryer to investigate the drying characteristics of sawdust as a raw material for bio-fuel. Average drying rate and energy efficiency was 1.4%/min and 69.23% at $100^{\circ}C$, respectively, and those at $120^{\circ}C$ was 2.1%/min and 71.03%, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.5
• /
• pp.856-865
• /
• 2020

Objective: This study was conducted to evaluate the physicochemical properties and changes in moisture concentrations of bedding materials under the conditions of rearing Korean Hanwoo cows. Methods: Two experiments were conducted to investigate the physicochemical characteristics (Exp. I) and usefulness as beddings for rearing cattle (Exp. II) by the type of beddings such as sawdust (SD), wood shavings (WS) and sawdust+wood shavings (S+W; 1:1 in volume), and the species of pine trees from different countries of origins (China, Pinus armandii, AR; Vietnam, Pinus kesiya, KE; USA, Pinus rigida, RI). Results: In Exp. I, SD-AR showed the largest proportion (78.3%) of fine particles (250 ㎛+below 250 ㎛) and the highest bulk density (208 kg/㎥) among treatments (p<0.05). The water absorption capacity at 24 h of both S+W-RI (713%) and -KE (701%) was the highest among treatments (p<0.05) and higher than those of SD or WS alone within each species of pine tree (p<0.05). Moisture evaporation rates (%) at 12 h were ranged from 52.3 to 60.8 for SD, 69.9 to 74.4 for WS, and 72.3 to 73.5 for S+W. Total amounts (mg/㎡) of ammonia emissions were the lowest (p<0.05) in KE species among the pine species within each type of bedding material, having higher ability of ammonia absorption. In Exp II, KE species in both side A and B had lower moisture concentrations (%) than other species. Regardless of types of beddings except SD-AR, moisture concentrations of beddings within a pen were higher (p<0.01) at side A than B. Conclusion: The KE species has better physical characteristics than other beddings and more useful for rearing Hanwoo cattle than other beddings, probably caused by the differences in the method and degree of wood processing rather than the species.

• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.781-790
• /
• 2019

Changes in the physical and chemical properties of soil materials during the nursing process have a great influence on the quality of containerized seedlings and on growth and survival after planting. In this study, the effect of biomaterials and their mixed ratios on the growth of Zelkova serrata seedlings in a containerized seedling production system was investigated. Mushroom sawdust, pine bark, and carbonized rice husk were used as biomaterials. The mixed ratios were 10% and 20% volume ratio of the growing medium volume, including the untreated controls. There was no significant difference in the height growth of the Zelkova serrata seedlings according to the biomaterials. The root collar diameter was the highest with the 20% carbonized rice husk and the lowest with the mushroom sawdust. The difference between the highest quality index and the lowest quality index was 30% in the order of the carbonized rice husk, pine bark, control, and mushroom sawdust, but there was no statistical significance. In this study, if the growing medium mixed with biomaterials does not reduce the seedling growth compared with the control, it is considered that the biomaterial can replace a part of the growing media. Therefore, the results show that some of the growing media can be replaced with carbonized rice husk or pine bark when producing Zelkova serrata seedlings.

• The Korean Journal of Mycology
• /
• v.38 no.2
• /
• pp.142-145
• /
• 2010

In this study, we attempted to find substitute materials, swelling rice hull, cocopeat, corncob and coconut sawdust, for sawdust in bottle cultivation of Pleurotus ostreatus. Chemical characters of mixture substrates with four substitute materials for pine sawdust were not different significantly. By comparison in mycelial growth and yield of fruitbody, mixture substrate of cocopeat were showed the same level in P. ostreatus. Therefore, it is suggested that cocopeat was substituted for sawdust for cultivation of P. ostreatus.

• Research in Plant Disease
• /
• v.16 no.3
• /
• pp.299-305
• /
• 2010

Objective of this study is to examine whether pine wood nematode (PWN: Bursaphelenchus xylophilus) in the sawdust discharged from infected trees cause pine wood disease or not. For this, survival time of PWN in soil was examined in which soil moisture was controlled as 15%, 22.5%, and 30% in volume ratio, respectively. The pathogenicity tests were conducted under greenhouse and field conditions. Survival time of PWN in soil was about three days in the saturated (about soil moisture of 23% in volume ratio) and dark condition between 25 and $28^{\circ}C$ of room temperature. None of potted seedlings with non-wounded roots was infected by PWN in sawdust. In field, pine wood disease was not occur in any pine trees. These results indicated that PWN discharged on soil when the infected trees were cut by chain saw can not cause pine wood disease.