• Journal of the Korea Society of Computer and Information
• /
• v.10 no.5 s.37
• /
• pp.103-108
• /
• 2005

In this Paper, we proposed a novel robust watermarking technique using PIM and 2D barcode for the copyright of the digital images. Because human is impervious to the change in the complex area, the embedding watermark to the selected coefficients using PIM enhances invisibility. A 2D barcode image is used for watermark in this research. The 2D barcode contains more information than conventional ID barcode and includes the error correction algorithm. Therefore the watermarking algorithm using 2D barcode enhances the robustness of watermark. From the experimental results , the proposed algorithm shows better invisibility and robustness performance in a general signal Processing such as JPEG and SPIHT lossy compression.

• The KIPS Transactions:PartD
• /
• v.16D no.3
• /
• pp.381-394
• /
• 2009

As a technique to enhance reusability for the created artifacts in software modeling process, the model driven method such like MDA has been applied. Unfortunately, the hierarchical and systematic MDA based development technique using UML is poor yet. This causes the problem that the MDA modeling with high consistency and reusability based on MDA metamodel is not being realized. To solve this problem, this paper proposes a MDA (PIM/PSM) component modeling technique using 2+1 view integrated metamodel. At first, the meta-architecture view model which can represents development process view and MVC view is defined. Then, the hierarchical integrated metamodels per view are addressed separately for modeling process and MVC at metamodel level on the hierarchy of the defined meta-architecture view model. These metamodels are defined hierarchically by layering the modeling elements in PIM and PSM pattern for UML models and GUI models. Appling the proposed metamodel to an ISMS application system, it is shown as a component modeling case study based on MDA. Through this approach, we are able to perform a component model with consistency and hierarchy corresponding to development process and MVC way. Accordingly, this may improve more independence and reusability of model.

• Journal of Korean Academy of Nursing
• /
• v.35 no.1
• /
• pp.47-55
• /
• 2005

Purpose: This study was to evaluate the validity of the Pediatric Index of Mortality Ⅱ(PIM Ⅱ). Method: The first values on PIM Ⅱ variables following ICU admission were collected from the patient's charts of 548 admissions retrospectively in three ICUs(medical, surgical, and neurosurgical) at P University Hospital and a cardiac ICU at D University Hospital in Busan from January 1, 2002 to December 31, 2003. Data was analyzed with the SPSSWIN 10.0 program for the descriptive statistics, correlation coefficient, standardized mortality ratio(SMR), validity index(sensitivity, specificity, positive predictive value, negative predictive value), and AUC of ROC curve. Result: The mortality rate was 10.9% (60 cases) and the predicted death rate was 9.5%. The correlation coefficient(r) between observed and expected death rates was .929(p<.01) and SMR was 1.15. Se, Sp, pPv, nPv, and the correct classification rate were .80, .96, .70, .98, and 94.0% respectively. In addition, areas under the curve (AUC) of the receiver operating characteristic(ROC) was 0.954 (95% CI=0.919～0.989). According to demographic characteristics, mortality was underestimated in the medical group and overestimated in the surgical group. In addition, the AUCs of ROC curve were generally high in all subgroups. Conclusion: The PIM Ⅱ showed a good, so it can be utilized for the subject hospital. better.

• KSBB Journal
• /
• v.21 no.5
• /
• pp.371-375
• /
• 2006

Frontal analysis(FA) and Pulsed input method(PIM) have been frequently utilized to measure isotherm of single solute, as well as non-competitive isotherms of two solutes in chromatography(1). FA and PIM were used in this study as complementary methods to measure adsorption isotherms of loxoprofen racemate in HPLC. Prior to FA and PIM experiments, measurements of loxoprofen solubility were made at hexane/ethanol=50/50, 80/20, 95/5(v/v) with acetic acid(0.5%) for adjusting pH. The last composition(95/5) of hexane/ethanol allows us to separate loxoprofen racemate into two forms(retentate, extract). PIM and FA were used to determine the isotherms of re-and ex-loxoprofen.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.2
• /
• pp.241-247
• /
• 2016

Natamycin is a widely used antifungal antibiotic. For natamycin biosynthesis, the gene pimE encodes cholesterol oxidase, which acts as a signalling protein. To confirm the positive effect of the gene pimE on natamycin biosynthesis, an additional copy of the gene pimE was inserted into the genome of Streptomyces gilvosporeus 712 under the control of the ermE* promoter (p_ermE*) using intergeneric conjugation. Overexpression of the target protein engendered 72% and 81% increases in the natamycin production and cell productivity, respectively, compared with the control strain. Further improvement in the antibiotic production was achieved in a 1 L fermenter to 7.0 g/l, which was a 153% improvement after 120 h cultivation. Exconjugants highly expressing pimE and pimM were constructed to investigate the effects of both genes on the increase of natamycin production. However, the co-effect of pimE and pimM did not enhance the antibiotic production obviously, compared with the exconjugants highly expressing pimE only. These results suggest not only a new application of cholesterol oxidase but also a useful strategy to genetically engineer natamycin production.

• Corrosion Science and Technology
• /
• v.21 no.1
• /
• pp.53-61
• /
• 2022

Alloys of Fe-(5.3-29.8)%Mn-(1.1-1.9)%Al-(0.4-0.5)%C were oxidized at 550 ℃ to 650 ℃ for 20 h to understand effects of alloying elements on oxidation. Their oxidation resistance increased with increasing Mn level to a small extent. Their oxidation kinetics changed from parabolic to linear when Mn content was decreased and temperature was increasing. Oxide scales primarily consisted of Fe₂O₃, Mn₂O₃, and MnFe₂O₄ without any protective Al-bearing oxides. During oxidation, Fe, Mn, and a lesser amount of Al diffused outward, while oxygen diffused inward to form internal oxides. Both oxide scales and internal oxides consisted of Fe, Mn, and a small amount of Al. The oxidation of Mn and carbon transformed γ-matrix to α-matrix in the subscale. The oxidation led to the formation of relatively thick oxide scales due to inherently inferior oxidation resistance of alloys and the formation of voids and cracks due to evaporation of manganese, decarburization, and outward diffusion of cations across oxides.

• The Korean Journal of Cytopathology
• /
• v.13 no.1
• /
• pp.21-27
• /
• 2002

Papillary immature metaplasia (PIM) of the uterine cervix (Immature condyloma) is a subset of low grade squamous intraepithelial lesion (LSIL) which is frequently associated with human papilloma virus (HPV) types 6 and 11. The histologic features of PIM include filiform papillae lined by evenly spaced immature metaplastic-type cells with frequent nucleoli, mild anisokaryosis, and a low mitotic index. To characterize the cytologic changes associated with PIM, we analyzed 14 cases of PIM from our file. We reviewed biopsy slides and the cervicovaginal smears taken proximate to the time of blopsy. Histologically, nine cases had either flat condyloma (7 cases) or high grade squamous intraepithelial lesion (HSIL) (2 cases). Cytologic changes included cells in various stages of maturation with karyomegaly (14 cases), cells with irregularities in the nuclear membrane (13 cases), intermediate cells with karyomegaly(13 cases), cells with binucleatlon (13 cases), and aborted koliocytes (11 cases) Cervicovaginal smears from all cases were interpreted as atypical squamous cells of undetermined significance (ASCUS), NOS or ASCUS, rule out squamous intraepithelial lesion (SIL) or LSIL in two cases with flat condyloma or HSIL in a case with severe dysplasia. PIM is a distinct histologic entity that can present with a spectrum of cytologic findings, but cytologic findings may resemble variable reactive conditions and immature HSIL. Therefore, it is difficult to diagnose PIM by cytology alone. However, the meticulous efforts for making the cytologic diagnoses which can Induce active management of patients are recommended because PIM is a variant of LSIL and frequently has a flat condyloma or HSIL.

• KIISE Transactions on Computing Practices
• /
• v.23 no.1
• /
• pp.13-27
• /
• 2017

This paper presents a tool that automatically generates mobile web applications from user interface (UI) models which are based on PELUM (Pattern and Event based Logical User Interface Modeling). PELUM is a method for the effective development of UI-centered embedded systems via UI modeling. The proposed tool consists of a model editor and a code generator. The former provides an environment for modeling a Logical UI Model (LUM) and a Programming Interface Model (PIM) on the web. On the other hand, the code generator sets the screen configuration and events' behavior, according to the LUM, synthesizing a local database schema according to the PIM, and then generates an executable mobile web app. It also can produce mashup web apps by receiving an open API address via the PIM. The generated mobile web apps follow the Model-View-Controller (MVC) architecture in order for users to easily customize them. The proposed tool enables them to generate mobile web apps that can be executed on various devices by modeling logical UIs on the web.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.559-567
• /
• 1995

The combustion process within a porous inert medium (PIM) burner is numerical studied. A detailed chemical reaction scheme including thermal and prompt NO$_{x}$ reactions is used to predict the formation and destruction of pollutants such as NO$_{x}$ and CO. The reaction paths for NO$_{x}$ formation are divided to quantify the amount of NO$_{x}$ formed through thermal NO$_{x}$ reaction or through prompt NO$_{x}$ reaction. Emission index is calculated to compare the actual mass of NO$_{x}$ or CO produced through the combustion of unit mass of fuel. It is found NO formation in PIM burner is confined in flame zone and formation is suppressed due to heat loss at down-stream of the flame. Higher production of NO through prompt NO reaction path is observed due to the higher concentration of fuel derivative species and its higher diffusion at flame front. For all equivalence ratios, CO emission within PIM burner is lower than that from the one-dimensional freely-propagating flame. PIM burner flame has better NO$_{x}$ emission index from .psi. = 0.75 to .psi. = 1.1. to .psi. = 1.1.

• Journal of KIISE:Software and Applications
• /
• v.32 no.3
• /
• pp.153-162
• /
• 2005

Component Based Development (CBD) is appealing as a technology to improve the productivity of software development through component reuse. Model Driven Architecture (MDA) is a new development paradigm which automatically generates application by transforming design models incrementally. Since both reusability of CBD and model transformation of MDA increase software productivity. integration of two technologies is desirable. To enable this technology integration, we need to devise a UML profile for specifying component design as a PIM. In this paper, we first define a meta-model for components, and propose a UML profile which is used to specify elements of component design as PIM. Since the proposed profile is based on Meta Object Facility (MOF) from which is MDA is derived, it is consistent and compatible with existing MDA methods and tools.