• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.115-123
• /
• 2018

Various types of robots running on power transmission lines have been developed for the purpose of line patrol monitoring. They usually have complex mechanism to run and avoid obstacles on the power line, but nevertheless did not show satisfactory performance for going over the obstacles. Moreover, they were so heavy that they could not be easily installed on the lines. To compensate these problems, flying robots have been developed and recently, multi-copter drones with flight stability have been used in the electric power industry. The drones could be remotely controlled by human operators to monitor power distribution lines. In the case of transmission line patrol, however, transmission towers are huge and their spans are very long, and thus, it is very difficult for the pilot to control the patrol drones with the naked eye from a long distance away. This means that the risk of a drone crash onto electric power facilities always resides. In addition, there exists another danger of electromagnetic interference with the drones on autopilot waypoint tracking under ultra-high voltage environments. This paper presents a patrol monitoring plan of autopilot drones for power transmission lines and its field tests. First, the magnetic field effect on an autopilot patrol drone is investigated. Then, how to build the flight path to avoid the magnetic interference is proposed and our autopilot drone system is introduced. Finally, the effectiveness of the proposed patrol plan is confirmed through its field test results in the 154 kV, 345 kV and 765 kV transmission lines in Chungcheongnam-do.

• 한국사회정책
• /
• v.25 no.4
• /
• pp.265-299
• /
• 2018

The pilot project for type diversification of self-sufficient support center that convert the centre corporation into social cooperative was introduced in 2015. That aimed to increase the number of participants of self-sufficient programmes and to create more jobs for the working poor through expanding the center's autonomy of usage of budget and arrangement of self-sufficient programmes. This study analyzed the organization transmitting processes and changes of the centers took part in the pilot project, then aimed to suggest the improvement schemes to be helpful for reinforcing positive efforts and removing obstacles in the process converting. The results show that converting into social cooperative is a choice for the sustainability of the centers led by surroundings rather than self-initiated plan. There are some positive changes that are increasing the enterprising spirit and obligation of the center staff. Further more, the cooperation with other community organizations is enhanced based on achieving regional recognition, and support of local governments and the opportunity for new businesses are expanded. However, these are very limited in the regions where social economy is undeveloped. Eventually, we should seek the development schemes of the pilot project considering the reduction of the number of participants in self-sufficient programmes and decreasing of their ability to work, even if some positive aspects are revealed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.294-301
• /
• 2013

OFDM technique uses multiple sub-carriers for the data transmission. Therefore, bit error rate increases because of inter-carrier interference caused by nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over multi path fading channels is characterized by small transmission gain in multiple sub-carrier frequency interval. Therefore bit error rate increases because of burst errors. Inter-leaver and convolution error control coding are effective for the reduction of this burst error. Pilot symbol is used for the channel estimation in OFDM systems. However, imperfect channel estimates in this systems degrade the performance. The performance of this convolution coding OFDM systems using inter-leaver, gauged by the bit error rate, is analyzed considering the nonlinear high power amplifier, carrier frequency offset and channel estimation error.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.856-864
• /
• 2016

Recently, HD transmission was commonplace in the case of the terrestrial broadcasting, furthermore, 4k UHD broadcasts are also being pilot and such as HD contents are common even in smart-phones. Like this, through both the content and audience are in the situation to take advantage of the HD mobile TV, only QVGA video contents are being transmitted in the terrestrial DMB broadcasting. In this paper, introduction plan of HD DMB service for activation of DMB industry will be described in terms of technical, institutional, and policy to overcome the limitations of such as DMB broadcasting. Due to the introduction of HD DMB, high quality contents will be provided to audience and the advertising revenue DMB broadcasters increased so that the market share of DMB in mobile broadcasting be recovered.

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.167-173
• /
• 2003

We treat the problem of channel estimation and interference cancellation in multiuser ultra-wide-band (UWB) communication systems over multipath fading channels. The UWB system under consideration employs a random time-hopping impulse radio format. We develop a channel estimation method based on linear weighted algorithm. An iterative channel estimation and interference cancellation scheme is proposed to successively improve the receiver performance. We also consider systems employing multiple transmit and/or receive antennas. For systems with multiple receive antennas, we develop a diversity receiver for the wellseparated antennas. For systems with multiple transmit antennas, we propose to make use of Alamouti’s space-time transmission scheme, and develop the corresponding channel estimation and interference cancellation receiver techniques. Simulation results are provided to demonstrate the performance of various UWB receiver techniques developed in this paper.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1152-1154
• /
• 1999

Recently. due to the drastic development of communication method between substations for pilot protective relaying system. The power line carrier(PLC) application is getting obsolete. Consequently, the coupling capacitor voltage transformer (CCVT) loses its necessity for the carrier coupling function, and so wound voltage transformer(VT) can be used to substitute CCVT for voltage signal. However, VT has been reported to give rise to ferro-resonance phenomena, so sufficient consideration on applying the VT to line side is required. This study introduces probable technical problems in using the VT on T/L side, and carries out feasibility study on the basis of modeling results by EMTP(Electro-magnetic transient program)

• ETRI Journal
• /
• v.29 no.4
• /
• pp.430-436
• /
• 2007

An OFDM/offset QAM (OQAM)-IOTA system uses the isotropic orthogonal transform algorithm (IOTA) function, which has good localization properties in the time and frequency domains. This is employed instead of the guard interval used in a conventional OFDM/QAM system in order to be robust for multi-path channels. However, the conventional channel estimation scheme is not valid for an OFDM/OQAM-IOTA system due to the intrinsic inter-symbol interference of the IOTA function. In this paper, a condition is derived to reduce the intrinsic interference of the IOTA function. This condition is obtained with the proposed pilot structure used for perfect channel estimation. We also derive the preamble structure appropriate for practical channel estimation of the OFDM/OQAM-IOTA system. Simulation results show that the OFDM/OQAM-IOTA system with the proposed preamble structure performs better than the conventional OFDM system, and it has the additional advantage of an increased data transmission rate which corresponds to the guard interval retrieval.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.4
• /
• pp.1-7
• /
• 2013

This paper presents the AMR (Automatic Meter Reading) system using the binary CDMA (Code Division Multiple Access) radio technology. The binary CDMA is the new radio technology in domestic research. Main implementation topics includes the binary CDMA remote meter reading system, the wireless piconet configuration for the wireless automatic meter reading, and the transmission scheduling for sending and receiving data. Also, the wireless packet data encryption is very important topics for the wireless automatic meter reading. The proposed AMR system is implemented as a pilot project in Jeju and Gangwon. It can be seen that the wireless remote reading using the binary CDMA wireless technology can be applied to the AMR system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.741-744
• /
• 2002

The closed circuit pump is applied to control rotating speed and direction of hydraulic motor in hydrostatic transmission. To development of this pump, first of all the servo control regulator has to be designed. Mechanical-hydraulic type servo control mechanism is excellent to be compared with electronic-hydraulic type servo control valve to reliability and economy. In this paper to development positive and negative variable displacement type servo regulator, the hydro-mechanical servo control mechanism is calculated and designed with force balance of pilot piston and position feedback of servo piston.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.302-305
• /
• 2009

This paper examines the effect of nitride formation on formability for Cu bearing high strength extra low carbon (ELC) steel sheets. For this purpose, we have investigated the effect of addition of aluminium (Al) and boron (B) on texture and precipitation behavior of the ELC steel during continuous annealing. Mechanical properties and microstructures of the ELC steel sheets were analyzed as well using uni-axial tensile test, electron back-scattered diffraction (EBSD) technique and transmission electron microscopy (TEM) following pilot rolling and continuous annealing. It has been found that the addition of Al and B increases the precipitation of AlN and BN. What is more, the scavange of solute nitrogen is effective in increasing the formability of the ELC steels. In addition, the Al and B addition improves the aging property of the ELC steel.