• 해양환경안전학회지
• /
• 제28권1호
• /
• pp.47-53
• /
• 2022

도선사가 되려는 사람은 선장 경력을 갖추고 도선수습생 전형시험과 도선사 시험에 합격한 다음에 해양수산부장관의 면허를 받아야 한다. 우리나라는 정부에서 도선 수요를 감안하여 도선사 면허의 수(數)를 제한하고 있어서 도선사 면허를 위한 도선수습생전형시험은 절대적 평가기준 없이 응시자 시험성적에 따라 상대평가를 실시함에 따라 문제의 소지가 있다. 본 연구의 목적은 도선사 시험제도에 대한 문제점을 도출하여 개선방안을 제시하는데 있다. 본 연구에서는 국내 도선사 시험제도 변천 내역을 조사하였고, 도선사 자격기준에 관한 국제기준을 분석하고 현직 도선사 77명에 대한 설문조사를 실시하였으며, 연구의 결과로써 국내 도선수습생 전형시험의 개선방안과 도선사 자격증명 제도개선의 단계적 실행방안을 제시하였다. 본 연구의 결과가 도선사 자격증명에 관한 정부의 정책 개발뿐만 아니라 관련 학술적 기초자료도 활용될 수 있을 것으로 기대한다.

• 한국항공운항학회지
• /
• 제28권3호
• /
• pp.74-83
• /
• 2020

Securing excellent pilots is not only directly linked to the military's improved combat capabilities, but also a way to minimize human and property losses from aircraft accidents. Therefore, a scientific method is needed to diagnose pilot aptitude from the pilot selection process and select those with high accident potential, those who are dropped out of the flight training process, and those who are not suitable for pilot life in advance. Developed countries have implemented pilot aptitude tests to solve these problems early on, but so far, the Korean Army has not introduced a pilot aptitude test system that uses diagnostic tools in the helicopter pilot selection process. Therefore, in this study, scientific diagnostic tools are developed for selecting helicopter pilots, and through this, it is predicted that the number of people who are likely to be dropped out of the training course and who have the potential for accidents will be selected in advance and eliminated in the selection process. In this context, prior research examined the key factors involved in the pilot aptitude test. Through this, the aptitude test items were developed and aptitude tests were conducted on student pilots currently in flight training, and the results of flight training were analyzed.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권2호
• /
• pp.75-85
• /
• 2008

In this paper, we compared domestic with foreign pilot lamps installed on the instrument board or electronic modules (car audio, air-conditional system, etc.) of an automotive vehicle by an accelerated life test in order to estimate the life of domestic pilot lamps. An accelerated life test method was developed and the relation of the life and voltage stress was analyzed. The main results are as follows; i) $B_{10}$ life of pilot lamp is above 5,000 hours, vehicle travel time for 10 years. ii) the life of domestic pilot lamp is longer than that of foreign thing. iii) the life distribution of domestic pilot lamp is wider than that of foreign thing. iv) it is possible to promote import replacement of automobile pilot lamp.

• 한국항공운항학회지
• /
• 제26권2호
• /
• pp.31-38
• /
• 2018

The pilot aptitude test so far has been conducted with a dichotomous concept of cognitive factor and non-cognitive factor, so it was not easy to explain concrete factors about pilot aptitude. Therefore, an integrated approach is needed to construct pilot aptitude test including all factors that can predict pilot aptitude. In previous study, we developed questionnaire items for the Pilot Aptitude Personality Test(PAPT) which can predict the flight training achievement through personality and personal characteristics. And those items were categorized as personality, cognition, and motivation factors. The flight training grades were correlated with all the test factors of the items, and the cognitive factors were high. As a result of the regression analysis, the total score of the three factors together accounted for 16% of the flight training grades. The results of the ANOVA showed that the cognition factors and motivation factors had significant effects on the completion of the flight training. The factors of PAPT predicted not only the completion of the flight training but also the flight performance. This is because the existing paper-pencil pilot aptitude test can only discriminate the flight training completion status. This is also a result of the fact that the introductory flight training consists of various factors including not only basic cognition but also personality and motivation.

• 터널과지하공간
• /
• 제33권6호
• /
• pp.472-482
• /
• 2023

격자형 또는 주방식 공법은 수평으로 매장된 광물을 채굴할 목적으로 적용되는 공법이다. 본 연구에서는 자연 암반을 암주로 사용하는 주방식 공법을 지하공간 건설에 적용하기 위해 설계와 파일럿 테스트를 수행하였다. 파일럿 테스트가 수행된 지역은 기존 골재 광산을 운영하는 곳으로 양호한 암반 조건과 적당한 심도를 보유하고 있었다. 파일럿 테스트 부지는 연구 결과 적용이 가능한 광산을 기반으로 접근성, 지반조건 등을 검토하여 후보지를 결정하였으며 상세 지반조사와 설계를 통해 부지 조성공사를 수행하였다. 파일럿 테스트는 암주형상을 8×8 m로 공간의 단면을 8×12 m 크기로 설계되었다. 시험발파를 통해 발파패턴을 결정하고 89공 3 m 굴진 단면 발파를 수행하여 총 92 m 굴진을 완료하였다. 현장 측정을 통해 평균 폭 12.5 m, 평균 높이 8.3 m을 확인하여 연구에서 고려하는 단면 모양과 유사하게 굴착공사를 진행할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.341-344
• /
• 2004

This paper presents results of test for combustion vibration in the pilot furnace for fossil power plant under combustion test. We measured static pressure variation in the pilot furnace together with air and fuel flow. From test results, it shows that vibration magnitude is affected by air and fuel flow. Also, a finite element analysis using a commercial S/W is performed to calculate acoustic mode of the pilot furnace. These results show that dominant frequency occurred is related to acoustic natural frequency of furnace. After this, it needs to be studied the relation between dominant frequency of combustion vibration and air flow rate.

• 한국초등과학교육학회지:초등과학교육
• /
• 제18권2호
• /
• pp.21-33
• /
• 1999

The purpose of this study was to develop an Instrument for the Measurement of Cognitive Conflict Levels of students who confronted with an anomalous situation in science teaming. Anomalous situation is generated when students' prediction is disconsistent with the observed fact. In this study, the researchers identified 4 components of cognitive conflict and developed three items for each component. The items were developed and revised by four pilot tests. In the first pilot test, 55 elementary school students participated in the test In the second pilot test, 88 students of the 5th and 6th grader participated in the test. The instrument of measuring cognitive conflict levels was given to the subjects right after demonstrating anomalous situation. For the demonstration, two different problem situations were developed: one was a pulley problem and the other was electric bulbs in parallel. Answered reasons for each items were analyzed to assess students' understanding on each items. In third pilot test, 125 elementary school students participated in the test. A factor analysis of the responses was carried out and reliability of the test was assessed by calculating internal consistency values. The items were finalized by three pilot tests. After 1 month after the third pilot test, researchers conducted the finalized test items to 323 students of the 5th and 6th grader. The final instrument showed moderate reliability (Cronbach-α 0.82∼0.87) and good content validity(0.93). A factor analysis of the response was carried out. 4 main factors completely coincided with 4 components that we supposed to be the conducts of cognitive conflict. The instrument can provide a means for both teachers and researchers to assess the cognitive conflict of a large number of students within a single class period. The results can be used by teachers to better understand the process of conceptual change of their students and to match instruction and materials accordingly.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권5호
• /
• pp.657-665
• /
• 2003

Combined De-NOx Process in which $NH_3$ SCR (Selective Catalytic Reduction) and non-thermal Plasma Process are simultaneously used, has been investigated with a pilot test facility. The pilot test facility treats the combustion flue gases exhausted from a diesel engine that generates 240 kW of electrical power. Test results show that up to 80 % of NOx (NO and NO2) can be removed at 100 - $200^{\circ}C$. None of conventional De-NOx techniques works under such low temperature range. In addition to NOx. the Pilot test results show that soot can be simultaneously treated with the present non-thermal plasma technique. The present pilot test shows that the electrical power consumption to operate the non-thermal plasma reactor is equivalent to 3 - 4 % of the electrical power generated by the diesel engine.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.858-865
• /
• 2006

SMART Pilot is a multipurpose small capacity integral type reactor. Main coolant pump (MCP) of SMART Pilot is a canned-motor-type axial pump to circulate the primary coolant between nuclear fuel and steam generator in the primary system. The reactor is designed to operate under condition of $310^{\circ}C$ and 14.7MPa. Thus MCP has to be tested under same operating condition as reactor design condition to verify its performance and safety. In present wort a test apparatus to simulate real operating situations of the reactor has been designed and constructed to test MCP. And then functional tests, performance tests, and endurance tests have been carried out upon a prototype MCP. Canned motor characteristics, homologous head/torque curves, coast-down curves, NPSH curves and lift-time performance variations were obtained from the qualification test as well as hydraulic performance characteristics of MCP.

• Restorative Dentistry and Endodontics
• /
• 제43권4호
• /
• pp.41.1-41.7
• /
• 2018

Objectives: The purpose of the present study was to compare the mean preparation times and frequency with which Reciproc and Reciproc Blue instruments reached the full working length in mandibular molars, with or without glide path preparation. Materials and Methods: Previously untreated mesiobuccal and mesiolingual canals with completely formed apices were randomly divided into 6 groups (n = 50) depending on the usage of Reciproc (RC; VDW), Reciproc Blue (RC Blue; VDW), C-Pilot (CP; VDW), and R-Pilot (RP; VDW) files: RC, RC Blue, RC + C-Pilot (RC-CP), RC-Blue + C-Pilot (RC Blue-CP), RC+R-Pilot (RC-RP), and RC Blue + R-Pilot (RC Blue-RP). A glide path was prepared using the hand-operated C-Pilot or the machine-operated R-Pilot instruments, respectively. The ${\chi}^2$ test, analysis of variance, and the Tukey post hoc test were used for statistical comparisons. Results: No statistically significant differences were observed in the distribution of the frequency of reaching the full working length in the RC (94%), RC Blue (88%), RC-CP (94%), RC Blue-CP (90%), RC-RP (96%), and RC Blue-RP (92%) groups (p > 0.05). Conclusions: Preparation of a glide path did not have a significant effect on reaching the full working length using these systems.