• Title/Summary/Keyword: Pilot signal

Search Result 263, Processing Time 0.03 seconds

Performance evaluation of hybrid acquisition in CDMA systems (DS/CDMA 시스템에서 하이브리드 동기 획득의 성능 분석)

  • 강법주;강창언
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.23 no.4
    • /
    • pp.914-925
    • /
    • 1998
  • This paper considers the evaluation of the hybrid acquistion perdformance for the pilot signal in the direct sequence code division multiple access(DS/CDMA) forward link. the hybrid acquisition is introduced by the combination of two schemes, the parallel and serial acquisions. The mean acquisition time of the proposed scheme is derived to consider both the best case(the correct code-phase offsets are included i one subset) and the worst case(the correct code-phase offsets exist at the boundary of two subsets), which are cause by the distribution of the correct code-phase offsets in the subset. Expressions for the detection, false alarm, and miss probabilities are derived for the case of multiple correct code-phase offsets and multipath Rayleigh fading channel. Numerical results present the hybrid acquistion performance with repect to design parameters such as postdetectio integration length in the search and verification modes, subset size, and number of I/Q noncoherent correlators, and compare the hybrid acquistion with the parallel acquistion in terms of the minimum acquistion time under the same hardware complexity.

  • PDF

Performance Evaluation of Reverse Link for Speech and Data Traffic ini CDMA-Based IMT-2000 System (CDMA 방식의 IMT-2000 시스템에서 음성 및 데이터 트래픽에 대한 역방향링크의 성능 평가)

  • Lee, Hyun;Kang, Bob-Joo;You, Young-Gap;Cho, Kyoung-Rok
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.11 no.4
    • /
    • pp.657-665
    • /
    • 2000
  • In this study, the bit error rate(BER) performance for the speech and data traffic is evaluated by results of the reverse link simulation of CDMA-based IMT-2000. Simulations in the reverse link are achieved for indoor, pedestrian, and vehicular environments, which are provided by ITU-R . Also, in the these simulations, the fast power control of 1.6kHz rate is applied. The amplitude and phase of the fading signal are estimated by using the 5-tap FIR filter, and the soft-decision Viterbi and Reed-Solomon (RS) decoding are applied. Simulation results provide the optimum ratio of pilot power to traffic power, the BER performance according to the number of fingers, and performance comparison between convolutional code and concatenated code at $10^-6$ BER in 5 MHz system.

  • PDF

Verification of Automatic PAR Control System using DEVS Formalism (DEVS 형식론을 이용한 공항 PAR 관제 시스템 자동화 방안 검증)

  • Sung, Chang-ho;Koo, Jung;Kim, Tag-Gon;Kim, Ki-Hyung
    • Journal of the Korea Society for Simulation
    • /
    • v.21 no.3
    • /
    • pp.1-9
    • /
    • 2012
  • This paper proposes automatic precision approach radar (PAR) control system using digital signal to increase the safety of aircraft, and discrete event systems specification (DEVS) methodology is utilized to verify the proposed system. Traditionally, a landing aircraft is controlled by the human voice of a final approach controller. However, the voice information can be missed during transmission, and pilots may also act improperly because of incorrectness of auditory signals. The proposed system enables the stable operation of the aircraft, regardless of the pilot's capability. Communicating DEVS (C-DEVS) is used to analyze and verify the behavior of the proposed system. A composed C-DEVS atomic model has overall composed discrete state sets of models, and the state sequence acquired through full state search is utilized to verify the safeness and the liveness of a system behavior. The C-DEVS model of the proposed system shows the same behavior with the traditional PAR control system.

A Pilot Study on the Muscle Activities in Step Input Test as an Indicator of the Vehicle Characteristics

  • Kong, Yong-Ku;Jung, Myung-Chul;Lee, In-Seok;Hyun, Young-Jin;Kim, Chang-Su;Seo, Min-Tae
    • Journal of the Ergonomics Society of Korea
    • /
    • v.32 no.3
    • /
    • pp.217-227
    • /
    • 2013
  • Objective: The purpose of this study was to analyze 'response time', 'peak response time' and 'overshoot value' for each muscle by applying the EMG signal to the vehicle response in ISO 7401 and to quantify the response of the driver according to vehicle characteristics by comparing vehicle characteristics and muscle responses of the driver. Background: The Open-loop test defined in international standards ISO 7401 is the only method for evaluating the performance of the vehicle. However, this test was focused only on mechanical responses, not driver's ones. Method: One skilled male driver(22 yrs. experience) was participated in this experiment to measure muscle activities of the driver in transient state. Then the seven muscle signals were applied to calculate 'response time', 'peak response time', and 'overshoot value'. Results: In the analyses of the EMG data, the effects of vehicle type and muscle were statistically significant on the 'response time' and 'peak response time'. Also, the effects of vehicle type, muscle, and lateral acceleration level were statistically significant on the 'overshoot value' in this study. According to the analyses of the vehicle motion data, vehicle motion variable(LatAcc, Roll, YawVel) was statistically significant on the 'response time' and vehicle type, vehicle motion variable, and lateral acceleration level were statistically significant on the 'peak response time', respectively. Conclusion: In the analyses of the 'response time' and 'overshoot value', the data of muscle activities(EMGs) was better index that could evaluate the vehicle characteristic and performance than the data of vehicle motion. In case of peak response time, both EMG and vehicle motion data were good index. Application: The EMGs data from a driver might be applicable as index for evaluation of various vehicle performances based on this study.

Performance Analysis and Design of a Mobile Station′s Multi-path Searcher for W-CDMA Down-link with Multiple Transmit Antennas (W-CDMA 下向 링크에서 다수의 송신 안테나가 있는 경우 단말기 다중 경로 검색기의 설계 및 성능 분석)

  • Won Seung hwan;Kim Young ju
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.10C
    • /
    • pp.1355-1362
    • /
    • 2004
  • In this paper, we present the performance analysis of a multi-path searcher operating over Rayleigh fading channels when multiple transmit antennas are employed in the down-link of W-CDMA system. The simulation results for the receiver operating characteristics (ROC) for 1, 2, and 4 transmit antennas are presented to corroborate the theoretical analyses. We also propose a procedure to find the optimum parameters of double-dwell serial searcher according to the number of the multiple transmit antennas. Our analyses and simulations indicate that post-detection integration is not necessary when the number of transmit antennas is more than two. Finally, we found that increasing transmit diversity order does not necessarily improve the detection performance when the received pilot signal strength is relatively low. Therefore, this gives us a practical criterion on increasing transmit diversity order.

Double-Input Singe-Output Architecture of LNA and Correction Method of Phase Variation for OTM Satellite Communication System (OTM(On-The-Move) 위성 통신 시스템을 위한 저잡음 증폭기 출력채널 단일화 구조 및 위상보정 방안)

  • Kwon, Kun-Sup;Ryu, Heung-Gyoon;Heo, Jong-Wan;Hwang, Ki-Min;Jang, Myung-Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.40 no.1
    • /
    • pp.1-8
    • /
    • 2015
  • In this paper, a double-input single-output architecture of a LNA(Low Noise Amplifier) is presented to enable to be devised for light weight and small-sized OTM(On-The-Move) satellite communication system suitable to be mounted on vehicles. In spite of advantages of the double-input single-output architecture of a LNA such as reduction of the number of physical channels, it results in time-varying phase error between a fundamental mode path and a high-order mode path. This paper shows that the error can be corrected by adding pilot signals to the LNA and using signal processing, and also gives the measurement data to use the method mentioned above.

Real Time Monitoring of Cars during European Rally Championships in Poland in 2005

  • Bartlomiej, Oszczak;Cezary, Specht;Stanislaw, Oszczak;Sitnik, Eliza
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • v.1
    • /
    • pp.241-246
    • /
    • 2006
  • The paper presents the preparations work and experiences gained from realtime GPS car monitoring during the European Rally Championships organized on 10-12 June 2005 in Poland. The developed system is based on GPS and GSM/GPRS technology. Distribution and teletransmission of data are possible using different GSM operators in Poland, which makes the system fully independent. The system's server collects data from rally cars, processing and send data through VPN connections to the SQL server located in main control room. Data can be collected in real time via Internet or GPRS. Some information on GSM/GPRS range during rally championships are also presented in the paper. The study covered many trials and tests of different software and various configurations of the GPRS modems before finally the system started to work. Information coming from 10 Rally Cars were collected to the SQL Server continuously in one second interval. In real time mode these all data were displayed simultaneously in the rally main control room and in the rally press conference room. Paper describes also adopted emergency procedures and remote reconfiguration of GPS/GPRS boxes inside rally cars made during championships. Some problems and method of practical solutions are presented to avoid active jamming dangerous for a driver and his pilot, having system of communication intercoms jammed by teletransmission of GPRS 900/1800 MHz. In cooperation with rally teams special GPS/GPRS safety boxes were designed and made. Monitoring of all 7 rally stages with GPS receivers and method of calibrations of the maps were presented. GSM signal coverage was also checked in all stages. All data transmitted from rally cars were recorded in the computer. Some of our GPS cars had accidents and dispite them information were continuously sent to server. There is possibility to show in post mission mode the position of chosen cars in our rally application. Some information of best rally cars are presented also in the paper.

  • PDF

Case Study for Ship Ad-hoc Networks under a Maritime Channel Model in Coastline Areas

  • Su, Xin;Yu, HaiFeng;Chang, KyungHi;Kim, Seung-Geun;Lim, Yong-Kon
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.9 no.10
    • /
    • pp.4002-4014
    • /
    • 2015
  • ITU-R M.1842-1, as a well-known specification dedicated to maritime mobile applications, has standardized wireless transmission protocols according to the particular characteristics of a maritime communications scenario. A time division multiple access (TDMA) frame structure, along with modulation schemes to achieve a high data rate, has been described clearly in ITU-R M.1842-1. However, several specification items are still under "to be decided" status, which brings ambiguity to research works. In addition, the current version of ITU-R M.1842-1 is focused mainly on maritime transmissions in open-sea areas, where the cyclic prefix (CP) is set to zero and only 16-QAM is used in the multi-carrier (MC) system. System performance might be dramatically degraded in coastline areas due to the inter-symbol interference (ISI) caused by selective fading. This is because there is a higher probability that the signal will be reflected by obstacles in coastline areas. In this paper, we introduce the transmission resource block (TRB) dedicated to ITU-R M.1842-1 for a ship ad-hoc network (SANET), where the pilot pattern of TRB is based on the terrestrial trunked radio (TETRA). After that, we evaluated SANET performance under the maritime channel model in a coastline area. In order to avoid noise amplification and to overcome the ISI caused by selective fading, several strategies are suggested and compared in the channel estimation and equalization procedures, where the link-level simulation results finally validate our proposals.

Design of a Warning System Using Radio Beacon Signal to Avoid Hazardous Area in VFR Mode (무선전파막을 이용한 시계 비행항공기의 비행위험지역 회피용 경보장치의 설계)

  • Kim, Yeon-Myung;Park, Dong-Young;Yun, Tae-Won;Hwang, Byong-Won
    • Journal of Advanced Navigation Technology
    • /
    • v.8 no.2
    • /
    • pp.98-104
    • /
    • 2004
  • When a straight-in landing from an instrument approach using ILS or VOR/DME is not possible or desirable because of topographical reason or bad weather, a circling approach maneuver is initiated by the pilot to align the aircraft with a runway for landing. Visual contact with the runway is necessary while conducting a circle to land maneuver. This research is to develop a new warning system based on a convention marker system which alerts pilots to watch out for exceeding the circling approach area. The airborne system also uses the same receiver unit without any new installations. The objective of this research is to design and develop a Yagi antenna in a special form. The research includes computer simulations to determine the size of antenna radiation pattern and to compute an expected flight path in case of alarm to validate effectiveness of the system.

  • PDF

A Study on the Multiple Spurious Operation Analysis in Fire Events Probabilistic Safety Assessment of Domestic Nuclear Power Plant (국내 원자력발전소의 화재사건 확률론적안전성평가에서 다중오동작 분석 연구)

  • Kang, Dae Il;Jung, Yong Hun;Choi, Sun Yeong;Hwang, Mee-Jeong
    • Journal of the Korean Society of Safety
    • /
    • v.33 no.6
    • /
    • pp.136-143
    • /
    • 2018
  • In this study, we conducted a pilot study on the multiple spurious operations (MSO) analysis in the fire probabilistic safety assessment (PSA) of domestic nuclear power plant (NPP) to identify the degree of influence of the operator actions used in the MSO mitigation strategies. The MSO scenario of the domestic reference NPP selected for this study is refueling water tank (RWT) drain down event. It could be caused by spurious operations of the containment spray system (CSS) of the reference NPP. The RWT drain down event can be stopped by the main control room (MCR) operator actions for stopping the operation of CSS pump or closing the CSS motor operated valve if the containment spray actuation signal (CSAS) is spuriously actuated. Outside the MCR, it can be stopped by operator actions for closing the CSS manual valves or motor operated valve or stopping the operation of CSS pump. The quantification result of a fire PSA model that takes into account all recovery actions for the RWT drain down event lead to risk reduction by about 95%, compared with quantification result of fire PSA model without considering them. Among the various operator actions, the recovery action for the spurious CSAS operations and the operator action for the manual valve are identified as the most important operator actions. This study quantitatively showed the extent to which the operator actions used as MSO countermeasures have affected the fire PSA quantification results. In addition, we can see the rank of importance among the operator recovery actions in quantitative terms.