• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.923-929
• /
• 2019

The stability of the propulsion system is crucial for the autonomous vessel. Multiple power generation and propulsion systems should be provided for the stability of the propulsion system. High power generation capacity is calculated for stability, resulting in economical decline due to low load operation. To solve this problem, we need to optimize the power system. In this paper, an OPMS for electric propulsion ship is constructed. The OPMS consists of a hybrid power generation system, an energy storage system, and a control load system. The power generation system consists of a dual fuel engine, the energy storage system is a battery, and the control load system consists of the propulsion load, continuous load, intermittent load, cargo part load and deck machine load. The power system was constructed by modeling the characteristics of each system. For the experiment, a scenario based on ship operation was prepared and the stability and economical efficiency were compared with existing electric propulsion ships.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.5
• /
• pp.48-54
• /
• 2021

According to the Ministry of Employment and Labor's statistics on occupational fatalities in South Korea, more than half of the fatalities in the past five years have occurred in the construction industry. The stuck-by and caught-in-between accidents associated with construction equipment is the major source of fatalities from construction sites. In order to prevent such accidents in construction sites, the government has spent lots of efforts including proposing the "special law on construction safety" and encouraging the implementation of new technology for accident prevention. However, numerous accidents are still occurred at construction sites and further efforts are still required. In this manner, this study developed a collision prevention technique that can prevent collision between equipment and worker by recognizing location and type of the nearby objects through ultrasound scanning. The study conducted a pilot experiment and the analysis results demonstrate the feasibility of achieving high performance in both object recognition and location estimation. The developed technique will contribute to prevent collision accidents at construction sites and provide the supplemental knowledge on developing automated collision prevention system for construction equipment.

• Medical Lasers
• /
• v.10 no.1
• /
• pp.37-44
• /
• 2021

Background and Objectives Hypothyroidism is the most common endocrine disease. On the other hand, there is no treatment that can improve the thyroid function. Low-level laser therapy (LLLT) can improve the cellular activity. The effect of hypothyroidism is not obvious. This study examined the effects of LLLT on the thyroid gland function of a propylthiouracil (PTU)-induced hypothyroidism mouse model. Materials and Methods Twenty-five male ICR mice were distributed into five groups of five animals each: Negative control (none PTU animal) and positive control (PTU animal) of unirradiated animals, and three experimental groups with LLLT (3J, 6J, and 12J). Each mouse was exposed to a distinct dose of a 632-nm laser once a week for three rounds. The positive control group and three LLLT groups were induced into a hypothyroidism state by PTU administration. The animals' thyroid-stimulating hormone and thyroxine levels were measured using an ELISA kit, and their thyroid tissue was harvested and analyzed after sacrifice at the end of the experiment. The hormone level and morphological changes in the tissue of the five groups were compared. Results The thyroid hormone levels in the control group and LLLT groups were similar. On the other hand, the thyroid tissue of the LLLT groups showed some morphological changes that were similar to those of iodine deficiency thyroid. Conclusion LLLT did not affect the thyroid gland function in PTU-induced hypothyroidism mice.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1216-1233
• /
• 2023

Conventional occupational therapy (OT) is conducted under the observation of an occupational therapist, and there are limitations in measuring and analyzing details such as degree of hand tremor and movement tendency, so this important information may be lost. It is therefore difficult to identify quantitative performance indicators, and the presence of observers during performance sometimes makes the subjects feel that they have to achieve good results. In this study, by using the Unity3D and artificial intelligence (AI) speaker, we propose a system that allows the subjects to steadily use it by themselves and helps the occupational therapist objectively evaluate through quantitative data. This system is based on the OT of the sensory integration approach. And the purpose of this system is to improve children's activities of daily living by providing various feedback to induce sensory integration, which allows them to develop the ability to effectively use their bodies. A dynamic OT cognitive assessment tool for children used in clinical practice was implemented in Unity3D to create an OT environment of virtual space. The Leap Motion Controller allows users to track and record hand motion data in real time. Occupational therapists can control the user's performance environment remotely by connecting Unity3D and AI speaker. The experiment with the conventional OT tool and the system we proposed was conducted. As a result, it was found that when the system was performed without an observer, users can perform spontaneously and several times feeling ease and active mind.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.2
• /
• pp.106-112
• /
• 2022

As a series of basic research to draw the pilot design measures for developing the habitat apparatus of Sulculus diversicolor supertexta inhabiting the coastal area of Jeju island, this study conducted a water tank experiment to understand the habitat marine environment of Sulculus diversicolor supertexta and the preference of habitat space focusing on the research fisheries performing the discharge of marine products. In the composition degree of marine algae in both fisheries, Donggwi-ri showed the highest gulfweed (79.3%) as brown algae and there were some coralline algae (17.2%) as red algae. Hansu-ri yielded the highest gulfweed (48.1%) as brown algae, which was followed by sea lettuce (10.4%) as green algae. In the preference of habitat space, the shelter angles 40° showed the highest adhesion as number of 82.9, which was followed by 60° and 70° as 69.2 and 68.2 respectively (P<0.05) by reviewing the environmental characteristics of habit of Salculus diversicolor supertexta in the coastal fishery of Jeju Island, when considering the adhesion rate in each of five shelters with different angles. In the future, there should be continuous research and monitoring for designing the fish shelters suitable for the coastal fisheries of Jeju island, and it would be also necessary to add the field-centered sustainable concrete research.

• Journal of Environmental Science International
• /
• v.32 no.9
• /
• pp.659-669
• /
• 2023

The purpose of this study is to predict the pressure drop due to the installation of venturi under diverse operating conditions such as dust concentration, pulse interval and pressure, and filtration velocity using algebraic-linear regression model and use it as an economic data and efficient operating condition for a pulse air jet bag filter. A pilot scale bag filter with a filter a filter size(Ø140 × 850ℓ, 12) was used, and the filters used in the experiment were the polyester filters most commonly used in real industrial sites. The SAS 9.4 program (SAS Institute, USA) was used to predict and to determine the effects of inlet concentration (C_i), pulse interval (P_i) and pressure (P_p), filtration velocity (V_f), presence or absence of venturi, etc. The results are shown below. The variation in pressure drop with or without venturi installation was 38.8 mmAq when venturi is installed and 47.6 mmAq when venturi is not installed, indicating a difference in pressure drop of 8.8 mmAq depending on venturi installation. It is estimated that the efficiency can be improved by about 18.5% if the venturi is installed.

• Science of Emotion and Sensibility
• /
• v.26 no.4
• /
• pp.29-40
• /
• 2023

Anxiety is known to upset the balance of the attentional system and prioritize the stimulus-driven system over the goal-directed system; however, self-instruction induces goal-directed behavior with the self-regulation effect. This study verified the effects of meteorological and self-instruction conditions on pilot anxiety and flight task performance for in-service pilots in a virtual reality environment. The meteorological conditions were divided into visual meteorological and very low visibility conditions, and the flight tasks were conducted by varying whether or not self-instruction was performed. The experiment results reveal that anxiety and heart rate were higher, and the performance of the flight task was lower in the very low visibility condition. However, anxiety and heart rate were lower, and the performance of the flight task was higher in the self-instruction condition. This result suggests that accidents due to difficulty in flight may increase because of anxiety, but such accidents may decrease because of flight performance improvement by self-instruction.

• Journal of the Korea Computer Graphics Society
• /
• v.30 no.3
• /
• pp.87-97
• /
• 2024

This study aims to develop a system that enables users employing PC and VR devices to collaboratively analyze data visualizations in a remote environment. The system provides a task-oriented node-link control interface to aid users in understanding the visualization analysis process and effectively distributing roles. Additionally, it offers a network environment where multiple users can collaborate and receive feedback on visualization analysis even when physically separated. To elucidate the collaborative analysis method implemented in the system, we designed a scenario. Furthermore, we conducted a pilot experiment to evaluate the system's usability with participants majoring in related fields. The experimental results confirmed that users can freely analyze data through easily comprehensible interface manipulations in an extended reality space, and efficiently conduct real-time collaborative analysis in a remote environment.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.534-539
• /
• 2006

In the ozone disinfection unit process of a piston type batch reactor with continuous ozone analysis using a flow injection analysis (FIA) system, the CT values for 1 log inactivation of Cryptosporidium parvum by viability assays of DAPI/PI and excystation were $1.8{\sim}2.2\;mg/L{\cdot}min$ at $25^{\circ}C$ and $9.1mg/L{\cdot}min$ at $5^{\circ}C$, respectively. At the low temperature, ozone requirement rises $4{\sim}5$ times higher in order to achieve the same level of disinfection at room temperature. In a 40 L scale pilot plant with continuous flow and constant 5 minutes retention time, disinfection effects were evaluated using excystation, DAPI/PI, and cell infection method at the same time. About 0.2 log inactivation of Cryptosporidium by DAPI/PI and excystation assay, and 1.2 log inactivation by cell infectivity assay were estimated, respectively, at the CT value of about $8mg/L{\cdot}min$. The difference between DAPI/PI and excystation assay was not significant in evaluating CT values of Cryptosporidium by ozone in both experiment of the piston and the pilot reactors. However, there was significant difference between viability assay based on the intact cell wall structure and function and infectivity assay based on the developing oocysts to sporozoites and merozoites in the pilot study. The stage of development should be more sensitive to ozone oxidation than cell wall intactness of oocysts. The difference of CT values estimated by viability assay between two studies may partly come from underestimation of the residual ozone concentration due to the manual monitoring in the pilot study, or the difference of the reactor scale (50 mL vs 40 L) and types (batch vs continuous). Adequate If value to disinfect 1 and 2 log scale of Cryptosporidium in UV irradiation process was 25 $mWs/cm^2$ and 50 $mWs/cm^2$, respectively, at $25^{\circ}C$ by DAPI/PI. At $5^{\circ}C$, 40 $mWs/cm^2$ was required for disinfecting 1 log Cryptosporidium, and 80 $mWs/cm^2$ for disinfecting 2 log Cryptosporidium. It was thought that about 60% increase of If value requirement to compensate for the $20^{\circ}C$ decrease in temperature was due to the low voltage low output lamp letting weaker UV rays occur at lower temperatures.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.81-87
• /
• 2004

It includes the considerable concentration and dangerousness as the peculiar work of a pilot and dock-master to berthing/deberthing the big object as for the ship within the port or the ship yard. A tug utilization is getting increased in this berthing/deberthing work and the own ship is affected a lot by external force due to moving with low advance speed. In this study, we constructed the 2 dimension virtual system which can conduct the berthing/deberthing manoeuvring work by using mainly tugs in a external force, particularly strong wind. Also, propose objective standard that could estimate the degree of manoeuvring difficulty, and conducted simulation experiment for this. we analyzed correlations between the subjective estimation which is described numerically the decreased dangerousness and the objective index which is related to the main parameter regarding manoeuvring by using this simulator from the result of conducting simulation experiment. And then we discussed the estimation technique of manoeuvring difficulty.