• 한국환경보건학회지
• /
• 제11권2호
• /
• pp.17-27
• /
• 1985

The objectives of this study is to examine efficiency of swinery wastewater treatment by trickling filters' pilot plant. The results of this study are as follows: 1. The characteristics of sample. The BOD$_5$ was from 2,450 to 2,880mg/l, COD(KMnO$_4$ acid method) was from 910 to 1,064mg/l, and SS was from 920 to 990mg/l. The pH of influent was from 7.3 to 7.6, and the temperature of water was from 17.0$\circ$C to 22.5$\circ$C. 2. For experiment by recirculation, the BODs removal efficiency is 65.2% at recirculation ratio (r)=0, and 70.7% at r=1. The ramoval efficiency of this study is higher than NRC formula of U.S.A.. The recirculation is not significant effect on removal efficiency. 3. For experiment by hydraulic load, the BOD$_5$ removal rate decreased from 73.1% at $3.1m^3/m^2\cdot d$ to 65.3% at $9.2m^3/m^2\cdot d$. The design formula of this study which shows the removal rate of soluble BOD is $Le/Li =10^{-0.24} D/Q^{0.24}$ (Q: hydraulic load, D: depth of filter). 4. For experiment by organic load, the BOD$_5$ removal rate is increased from 70.2% at $0.77kg/m^3\cdot d$ to 75.4% at $4.28kg/m^3\cdot d$. We can obtain the straight line y=0.749 x (y: removed BOD, x :applied BOD) by the least squares method. 5. We can know that trickling filters is strong with the hydraulic load and the organic matter shock load. Here, we can judge that trickling filters is a good method for the treatment of swinery wastewater which containing high concentrated organic matter.

• 한국수산과학회지
• /
• 제39권spc1호
• /
• pp.132-141
• /
• 2006

Artificial structures have been designed as pilot structures to promote the creation and restoration of tidal flats. However, little information is available as to whether such artificial construction affects the macrobenthic community structure. We monitored the variation of the macrobenthic community structure and species composition near natural and artificial structures (seaweed and a timber fence) on the tidal flats near the Iwon Dike, Korea. In total, 137 macrobenthic species were recorded during this study, predominantly crustaceans (47%), polychaetes (18%), and molluscs (27%). Polychaetes comprised over 50% of the total density, followed by gastropods (38%) and crustaceans (11%). Macrobenthic species composition in the artificial and natural areas, was initially similar, but it differed after 7 months. The gastropod Umbonium thomasi, the most dominant species, was present at both sites in the first month after the start of the experiment, but disappeared at the artificial sites within 7 months, suggesting disturbance by the environmental factors. The number of species and diversity (H') varied significantly within sites at the beginning of the experiment, but no difference was observed after 7 months. Multivariate analysis (multidimensional scaling) revealed significant differences in community structure between the artificial and the natural areas from 7 months after the start of the experiment, except from 18 to 21 months. The community structures were mainly influenced by U. thomasi. Community structure at the artificial sites was affected by environmental variables, such as carbon, COD/IL sulfide, loss of ignition, kurtosis and silt, which changed over time. We observed no significant correlations between environmental variables and the dominant species, except in the case of Spio sp. and Macrophthalmus dilatatus, suggesting that the biological interactions and temporary disturbances such as typhoon, as well as the effects of artificial structures may also be important regulating factors in this system.

• 한국농공학회지
• /
• 제40권3호
• /
• pp.83-92
• /
• 1998

Field experiment was performed from August 1996 to January 1998 to examine the applicability of constructed wetland system for wastewater treatment in rural area. The pilot plant was installed in Kon-Kuk University and the school building septic tank effluent was used as an influent to the treatment basin. Hydraulic loading rate was about 0.1 6$0.16^3/m^2$ day and theoretical detention time in the system was 1.38 days. The treatment basin was composed of sand and reed. The influent DO concentration was low and many cases close to zero, but effluent concentration was higher than the influent which implies that oxygen was supplied naturally. The average concentration of influent BOD was 126mg/L, and with average removal rate of 69 % the average effluent concentration was 4Omg/L which satisfied the effluent water quality standard for the system of interest. The average influent concentration of COD was 2Olmg/L and average effluent concentration was 75mg/L with average removal rate of 60%. The performance of BOD and COD tends to deteriorate in the low temperature, and appropriate action needs to be taken during the cold winter time for stable operation. The average influent concentration of SS was 5Omg/L, and effluent was 1 1mg/L with average removal rate of 76% which satisfied the effluent water quality standard for the system of interest. The results for the regulated components, SOD and SS, from the experiment showed that constructed wetland system can meet the effluent water quality standards. The average influent concentration of total phosphorus was 25.6mg/L and average effluent concentration was 7.8mg/L with average removal rate of 63%. Not like the performance of the above components, average nitrogen removal rate was only 11.2% which is not satisfactory. Although, nitrogen is not regulated at this moment, it can cause many environmental problems including eutrophication. Therefore, nitrogen removal efficiency should be improved for actual application. From the result of the field experiment, constructed wetland system was thought to be an appropriate alternative for wastewater treatment in rural area.

• 한국음향학회지
• /
• 제38권1호
• /
• pp.1-8
• /
• 2019

본 논문은 호수에서의 원활한 수중음향통신을 위해 호수의 수중 채널 환경에 따른 통신 변수들을 도출하였다. 본 논문에서는 실제 호수 환경에서의 두 번의 실험을 통하여 상관 시간과 상관 대역폭을 산출하였다. 두 번의 실험에서 채널 추정과 비트오류율 산출을 위해 chirp 신호와 BPSK(Binary Phase Shift Keying) 신호를 전송하였고, 각각의 실험은 송신단과 수신단과의 거리가 300 m에서 400 m일 때와 500 m에서 600 m일 때 진행하였다. 첫 번째 실험과 두 번째 실험에서 각각 산출한 상관 시간은 175 msec와 340 msec이고, 상관 대역폭은 10 Hz와 5.71 Hz이다. 동기 신호의 길이와 프레임 내 파일럿 신호의 간격이 상관 시간보다 짧은 경우에만 동기화와 비트오류율 성능이 더 우수하여 산출한 실험 결과가 적절함을 확인하였다.

• 한국항해항만학회지
• /
• 제47권2호
• /
• pp.75-84
• /
• 2023

Ships need to ensure safety during their navigation, which makes route determination highly important. It must be accompanied by a route following controller that can accurately follow the route. This study proposes a method for automatically generating the ship route based on deep reinforcement learning algorithm and following it using a route following controller. To generate a ship route, under keel clearance was applied to secure the ship's safety and navigation chart information was used to apply ship navigation related regulations. For the experiment, a target ship with a draft of 8.23 m was designated. The target route in this study was to depart from Busan port and arrive at the pilot boarding place of the Ulsan port. As a route following controller, a velocity type fuzzy P ID controller that could compensate for the limitation of a linear controller was applied. As a result of using the deep Q network, a route with a total distance of 62.22 km and 81 waypoints was generated. To simplify the route, the Douglas-Peucker algorithm was introduced to reduce the total distance to 55.67 m and the number of way points to 3. After that, an experiment was conducted to follow the path generated by the target ship. Experiment results revealed that the velocity type fuzzy P ID controller had less overshoot and fast settling time. In addition, it had the advantage of reducing the energy loss of the ship because the change in rudder angle was smooth. This study can be used as a basic study of route automatic generation. It suggests a method of combining ship route generation with the route following control.

• 방사성폐기물학회지
• /
• 제11권2호
• /
• pp.77-83
• /
• 2013

방사능 오염 토양 복원을 위해 실험실 규모의 동전기 복원장치를 제작하여 가동 하던 중 토양 내 존재하던 금속이온의 용출로 금속 산화물이 발생하여 음극의 전류 흐름을 차단하는 문제가 발생하였다. 전류의 차단으로 토양 내 우라늄 제거 능력이 상실되어 이러한 문제를 해결하는 해결 방안을 모색하여 개선된 동전기 복원 장치를 제작하였다. 개선된 실험실 규모 동전기 복원 장치를 이용하여 토양복원 실험을 25 일간 수행 하였을 때 우라늄 잔류 농도는 0.81 Bq/g으로 약 96.8%의 제거 효율을 보였으며, 초기 우라늄 농도 50 Bq/g 일 때 우라늄 규제 해제 농도인 1 Bq/g 이하로 제거 되기 까지는 34 일의 복원 기간이 필요하고, 초기 우라늄 농도 75 Bq/g, 100 Bq/g 일 때 각 42 일, 49 일이 필요한 것으로 나타났다.

• 한국멀티미디어학회논문지
• /
• 제15권1호
• /
• pp.32-39
• /
• 2012

본 논문에서는 위성 DMB (satellite-digital multimedia broadcasting, S-DMB) 송수신 시스템을 이용한 위치 기반 서비스 (location based services, LBS) 구현 방법에 대하여 제안한다. S-DMB 송출 신호는 2 GHz 대역의 주파수를 사용하므로 직진성은 강하지만 회절성이 약한 특징을 갖고 있다. 따라서 S-DMB 시스템에서는 실내 및 지하 공간 등의 음영 지역이 다수 존재하게 되는데, 이러한 음영지역에서는 갭필러 (gap filler)라는 음영지역 중계기를 통해서 S-DMB 신호를 수신하게 된다. 이러한 갭필러의 식별정보 (gap filler ID)를 확인하면 갭필러가 설치된 지역을 알 수 있다. 따라서 본 논문에서는 S-DMB 신호를 수신할 수 있는 단말기에서 S-DMB 파일럿 신호 중 갭필러 식별정보를 이용하여, 관심 위치 정보 등록, 목적지 도착 알림, 및 지역 정보 알림 기능 등의 LBS를 구현하는 방법을 제안한다. 제안한 LBS 구현 방법의 성능을 검증하기 위한 실험에서는 S-DMB 수신칩이 갭필러 식별정보를 애플리케이션 프로세서 (application processor, AP)로 전달하도록 단말기의 펌웨어 (firmware)를 수정하여 LBS 구현 테스트를 진행하였다.

• 자원환경지질
• /
• 제53권3호
• /
• pp.235-244
• /
• 2020

폐광산 지역에서 발생하는 광산배수의 오염원소중 하나인 구리(Cu)는 낮은 농도에서도 독성을 지니고 있어 수계환경에 노출되기 전에 처리되어야 한다. 본 연구에서는 경남 고성군 S광산의 갱내수 정화시설의 Cu 제거효율을 개선하기 위해 석회석과 폐상퇴비를 혼합한 자연정화 기반의 반응조를 이용하여 약 9개월 동안 현장 파일럿실험을 수행하였다. 반응조별 유입수 대비 pH 증가량과 Cu 제거효율은 Successive Alkalinity Producing System (SAPS) > Reducing and Alkalinity Producing System (RAPS) > 석회석반응조 순으로 나타났다. SAPS조와 RAPS조에서는 석회석의 영향과 동시에 유기물의 분해로 인한 알칼리도의 부과로 석회석반응조보다 높은 pH 환경을 조성하였다. pH가 증가할수록 Cu 제거효율이 높아지는 결과를 통해 pH 상승이 Cu를 처리하는 주된 기작임을 확인할 수 있었다. 또한 황산염환원박테리아(Sulfate Reduction Bacteria, SRB)가 SAPS조에서 가장 많이 활성화 된 것을 확인 할 수 있어, 황산염환원반응도 Cu를 제거시키는 기작에 관여함을 판단할 수 있었다. 본 연구는 S광산에서 발생하는 광산배수의 특성에 알맞은 맞춤형 정화공정을 도출하기 위해 현장 그대로의 조건에서 실험을 수행한 것에 의의가 있으며, 향후 정화시설의 개선에 있어 공법 선정에 도움을 줄 수 있을 것이다.

• 한국농공학회논문집
• /
• 제54권3호
• /
• pp.1-9
• /
• 2012

As topographic characteristics of Korea where 64 % of the national land area is forest and only 17 % is being used as farmland, remediation of farmland contaminated by heavy metals is a considerably important issue. In this study, as an alternative of practically and effectively remediating farmland which was abandoned as its crop plants exceeded maximum residue limit of heavy metals due to mining impact, applicability of stabilization method was examined through the pilot-scale field experiment. Three plots ($L{\times}W{\times}D=3m{\times}2m{\times}0.3m$) were installed at the selected farmland and in plot 1, only soil of the selected farmland was applied, in pilot 2, soil of the selected farmland plus 3 % limestone (w/w) was applied and in pilot 3, soil of the selected farmland plus 3 % limestone was applied and then uncontaminated soil was covered thereon (0.3 m). After that, seeds of radish, Korean cabbage and soybean of which characteristics of edible portions are different were sowed on each plot and cultivated. Afterwards, at a proper harvesting time (app. 80 days later), crop plants and soil were collected and phytoavailability (0.11 M HOAc extractable) of heavy metals in soil and accumulated concentration of heavy metal in edible portion of crop plants were examined. As a result, it was revealed that phytoavailability of heavy metals in soil added with limestone (plot 2) was clearly reduced compared with plot 1 (untreated) and owing to this treatment, accumulated concentration of heavy metals in edible portion of crops was also clearly reduced compared with plot 1. While radish cultivated in plot 1 had exceeded maximum residue limit of agricultural products, in particular, plot 2 using limestone had shown concentration lower than maximum residue limit and this plot had shown little difference with 3 plot where crop was cultivated in uncontaminated soil cover. Therefore, it was considered that for abandoned farmland like the selected farmland, reducing mobility and phytoavailability of heavy metals and reducing crop uptake through stabilization method would be an effective and practical alternative for producing safe agricultural products on a sustained basis.

• 한국산학기술학회논문지
• /
• 제13권2호
• /
• pp.926-933
• /
• 2012

일반적으로 비료용 인산은 황산과 인광석의 분해반응에 의해 생산되는데 이 반응은 발열반응으로써 온도가 상승하게 되면 생산수율 저하의 문제점이 따른다. 이를 해결하기 위해 인산제조공정에서는 불산(HF)과 사불화규소(SiF4)가 함유된 증기(vapor, $80^{\circ}C$)를 배출시키는 진공냉각기(vacuum cooler)를 운영하고 있으나, 이 과정에서 냉매 및 폴리실리콘 원료로 활용가능한 귀중한 자원(불소 & 규소)들이 버려지고 있다. 본 연구는 인산제조공정 부산물인 규불산(H2SiF6)으로 회수하기 위한 기초 실험연구로서, 불소회수 후 인산슬러리 내 불소 농도변화를 분석하여 규불산 회수가능량을 예측하였다. 회수 후 불소농도는 약 0.12wt% 감소하였고, 대상 비료공장의 생산규모를 고려할 경우 불소 회수가능량은 약 5,509 톤/년이었다. 한편 현장에서, 규불산의 농도는 0.35wt%에서 7.33wt%까지 농축되었고, 진공냉각기로부터 배출되는 증기유량은 $51,000m^3/hr$이었다. 또한 Pilot실험을 통한 불소 회수효율은 76.74%로 나타나, 실제 회수할 수 있는 규불산량은 5,340 톤/년으로 추정되었다.