• 제목/요약/키워드: Pilot Unit

검색결과 219건 처리시간 0.027초

Water Gas Shift Reactor의 Multiscale 모델링 및 모사 (Multiscale Modeling and Simulation of Water Gas Shift Reactor)

  • 이욱준;김기현;오민
    • Korean Chemical Engineering Research
    • /
    • 제45권6호
    • /
    • pp.582-590
    • /
    • 2007
  • Water gas shift reaction(WGSR)이 일어나는 파이럿 규모 고온반응기에서의 거동 및 성능을 예측하기 위하여 수학적 모델을 수립하고 모사를 수행하였다. 반응기의 형상, 유체 및 열 이동에 대해 상세한 모델링이 가능한 전산유체역학 기법과 공정시스템 공학에서 사용되는 공정모사 기법을 함께 사용한 multiscale 모델링 및 모사를 수행하였으며, 그 결과를 일반 공정모사와 비교하였다. Multiscale 모사를 통해 CO의 전환율은 최고 0.85, 발열반응으로 인해 충전층의 온도는 약 720 K까지 오름을 알 수 있었다. 또한 동적모사를 통해 시간에 따른 반응기내에서의 온도분포, 전환율 분포 등의 주요한 변수 및 성능들의 시간에 따른 변화를 예측할 수 있었다. Multiscale 모사 기법은 파이럿 규모의 반응기뿐 아니라 상업규모의 공정에 대해 실제 상황을 상세히 반영하여 정확한 예측이 가능하므로, 상업공정 설계에 주요한 기술로 사용될 수 있다.

울돌목 시험조류발전소의 수중소음 특성 연구 (Acoustic Characteristics of Underwater Noise from Uldolmok Tidal Current Pilot Power Plant)

  • 고명권;최지웅;이진학;정원무
    • 한국음향학회지
    • /
    • 제31권8호
    • /
    • pp.523-531
    • /
    • 2012
  • 최근 친 환경 발전에 관한 관심이 높아지면서 태양광, 풍력, 조력, 조류 발전에 대한 수요가 점차 증가되고 있다. 이러한 친 환경 발전 방식 중 조석운동에 의한 해수의 흐름을 이용하는 조류발전은 지형적 특성에 의해 강한 조류가 발생하는 지역에서만 사용할 수 있는 특수한 발전 방식이다. 울돌목 해역은 조류 발전이 가능한 매우 강한 조류가 형성되는 지역으로 다른 지역의 해역과 구분되는 특별한 환경을 제공한다. 하지만, 해양에서의 인간의 활동은 수중소음을 야기하여 해양환경에 큰 영향을 미친다. 최근에는 환경영향평가의 중요성이 대두되면서 발전소 가동 시의 소음 특성 분석 및 전파양상 예측에 대한 필요성이 증가하고 있다. 본 연구는 조류발전소의 수중소음 특성을 측정하고 울돌목 해역으로의 전파양상을 모델링 하였다.

항공용 인터콤의 백업 모드 운용을 위한 디지털 방식의 이중화 설계 (The Digital Redundancy Design for Back-up Mode Operation of Aviation Intercom)

  • 정성재;조경학;김동혁;이성우
    • 한국항행학회논문지
    • /
    • 제26권5호
    • /
    • pp.358-364
    • /
    • 2022
  • 항공용 인터콤 시스템은 정/부조종사 간 내부 통화 및 조종사와 승무원 간 내부 통화, 초고주파 무전기(U/VHF)와 같은 통신 장비를 통한 외부 통화, 초단파전방향거리탐지기/계기착륙장치(VOR/ILS), 전술 항법 장치(TACAN)와 같은 항법 및 임무 장비 오디오 신호 모니터링, 비행 데이터기록장치(FDR) 및 자료전송 시스템(DTS)으로의 음성 녹음용 오디오 신호 출력, 항공기의 상태와 위협 등에 대한 오디오 경고음/경고 음성 발생 등 항공기 내의 모든 음성 신호에 대한 처리를 담당하는 장비이다. 이러한 항공용 인터콤은 아날로그 오디오 신호의 경우 노이즈에 민감하기 때문에 조종사 및 승무원의 임무 수행을 위해 항공기 내/외부의 전자파 노이즈로부터 오디오 신호를 보호할 수 있는 이중화 설계가 필요하다. 본 논문에서는 항공용 디지털 인터콤의 이중화를 위한 정상/백업 운용모드 및 디지털 방식의 이중화 설계 방안과 제작 및 검증 결과에 대하여 기술한다.

전군 공통 서비스 구현을 위한 국방 IoT 적용방향 연구 (A Study on the Application of Defense IoT for the Implementation of Common Service in the Army, Navy, and Air Force)

  • 배영민
    • 산업경영시스템학회지
    • /
    • 제45권3호
    • /
    • pp.31-39
    • /
    • 2022
  • The Army, Navy, and Air Force are currently making various efforts to apply defense IoT technology by reflecting the characteristics of each military. However, there are concerns that comprehensive collection, management, and analysis may be limited because each military has no overlapping system or guaranteed interoperability of data, and there are inefficient aspects in terms of using and investing a limited defense budget. In this study, evaluation items and priorities for pilot projects were selected by applying Delphi technique and AHP method to determine which projects are preferentially effective when commonly applied in terms of Army, Navy, and Air force. As a result of the analysis, the project basis and driving force, project feasibility, performance and ripple effect, redundancy and connection were identified in the order of IoT-based small detachment units and unmanned base construction, intelligent smart unit, smart ground ammunition depot, and smart training management system. According to the comprehensive results reflecting the weights of each evaluation item, the fact that small detachment units and unmanned base construction project are recognized as the first project to be applied to the Army, Navy, and Air Force is a valid approach to be effective while each military is burdened with personnel management because of the reduction of manpower. Through the research results, it is expected that the direction of application to the policy of the defense IoT project can be confirmed in terms of efficient use of limited budgets.

A study of the improvement of the national technical qualification practical evaluation method on National Competency Standards in the field of floral design

  • Hyun-Ho, Jang;Taek-Keun, Oh;Jwakyung, Sung
    • 농업과학연구
    • /
    • 제48권4호
    • /
    • pp.865-873
    • /
    • 2021
  • The purpose of this study is to suggest an improvement plan for the practical evaluation method used to determine the national technical qualification in field of flower design to improve its development. First, an advisory committee was formed, after which comparisons, an analyses and matching were conducted of the currently used national technical qualifications and competency units and the competency unit elements of the National Competency Standards in an effort to strength practical skills and industrial field abilities in the field of flower design. Second, we visited an industrial site to understand the practical and technical aspects as well as the facilities and equipment used in the flower design field. The status of workers in the industrial field in the field of flower design was then analyzed. Through this process, practical examination questions were developed for improve the evaluation method. In addition, to ensure a properly configured result, a pilot test was conducted involving those majoring in the field of flower design. To investigate the feasibility of the developed exam, a survey focusing on targets related to flower design was conducted. Based on the results, by suggesting an improvement plan for the practical evaluation method of national technical qualifications in the field of flower design, it is possible to improve knowledge, technical aspects, and literacy, allowing us to train outstanding technical professionals. In the end, this study can be expected to contribute to the improvement of the flower design industry.

임해준설매립지 식물재배공정에서 밀도에 따른 조경수목의 생장 (Growth of Landscape Tree Species at Two Planting Densities in a Planting Pilot System for Reclaimed Dredging Areas)

  • 이덕범;남웅;곽영세;정인호;이상석
    • 한국조경학회지
    • /
    • 제37권2호
    • /
    • pp.114-123
    • /
    • 2009
  • 본 연구는 임해준설매립지반의 토양환경에서 4종의 조경수종을 대상으로 생장 및 적응성을 평가하였다. 준설토와 조경토를 1:1로 혼합하여 1m 높이로 조성한 식물재배 실험구(planting pilot system)기반 토양의 토성은 사질토(S)로 분류되었고, 평균 pH값은 7.16으로 약알칼리성을 나타내었으며, 전기전도도(EC)는 294 ${\mu}S/cm$로 해수의 영향을 받았던 토양이었으나 비교적 낮은 EC값을 보였다. 토양의 유기물 함량은 3.9%로 낮았고, 총질소 함량은 397 mg/kg에 가깝게 나타났으며, 인산의 평균함량은 4.60 mg/kg으로 매우 낮아 식물의 생장을 돕기 위해서는 계획적인 인산질 비료의 시비가 필요한 것으로 사료되었고, 토양의 치환성 양이온 함량은 K가 152.9 mg/kg, Ca가 1,190 mg/kg, Mg가 62.7 mg/kg, Na가 24.8 mg/kg으로 비교적 높은 함량을 나타내었다. 식재후 4년인 비교년도의 식물재배 실험구에서 식재조건에 따른 생장수고는 물오리나무>사방오리>곰솔>피라칸사 순으로 나타났고, 흉고직경은 물오리나무>사방오리>곰솔 순으로 나타났다. 사방오리, 물오리나무, 곰솔 및 피라칸사 개체당 열매, 잎, 가지, 줄기, 주근, 중근 및 세근의 식물량은 고밀도보다 저밀도 식재지역에서 높게 나타났고, 고밀도와 저밀도 식재지역에서 개체당 식물량은 물오리나무>사방오리>곰솔>피라칸사 순으로 나타났다. 식물재배 실험구에서 4종 모두 고밀도보다 저밀도 식재지역에서 개체당 식물량은 물질생산 및 분배가 크게 반영된 생육양상을 보여 약 2배 높았다. 이는 토양 내의 영양염류의 이용경쟁에 있어 고밀도보다 저밀도 식재지역에서 더욱 유리한 조건이 반영되었기 때문으로 판단되었다. 단위면적당 식물량은 물오리나무>p사방오리>곰솔>피라칸사 순으로 나타났고, 식물량이 가장 적은 피라칸사 기준으로 곰솔은 약 7배, 사방오리는 약 13배, 그리고 물오리나무는 약 23배 높은 식물량을 나타내었다. 식재조건에 따른 실험 수종 개체당 식물량은 고밀도보다 저밀도 식재지역에서 약 2배 높은 것으로 나타났지만, 단위면적당 식재조건에 따른 식물량은 저밀도보다 고밀도 식재지역이 비슷하거나 높았다. 고 저밀도 식재지역에서 오리나무속의 식물들이 많은 식물량을 보였는데, 이는 임해준설매립지의 토양 특성에 잘 적응성을 나타냄과 동시에 질소 고정능력을 갖는 속성수(fast-growing tree)의 특성 및 지하부에 뿌리혹박테리아(root nodule bacteria)가 형성됨으로써 토양에 불용성 영양원의 이용도를 높일 수 있는 능력이 있기 때문으로 판단되었다. 본 연구는 제한된 부지를 대상으로 4종의 식물만을 이용하여 연구가 진행되었기 때문에 다양한 식재조건 및 수종을 대상으로 하는 추가적인 연구가 필요하고, 조경분야의 생태적 활용을 위해서는 대상 식물들을 이용한 조경학적 적용방안에 대한 연구가 보완되어야 한다.

액상 균일질 촉매를 이용한 $SO_2/NO$ 동시 처리 기술 개발 (Simultaneous Removal of $SO_2/NO$ using liquid Homogeneous Catalyst)

  • 정승호;배진열;박돈희;정경훈;차진명
    • 대한환경공학회지
    • /
    • 제29권1호
    • /
    • pp.62-67
    • /
    • 2007
  • 본 연구의 목적은 액상 균일질 촉매를 이용하여 연소가스 중에 포함되어 있는 $SO_2/NO$의 동시제거 기술 개발에 있다. 연구는 bench scale/소규모 pilot scale에서 이루어졌으며 연구 결과는 다음과 같다. 1) $SO_2$는 실험조건에 상관없이 높은 제거효율을 가지는 것으로 확인되었다. 그러나 NO의 경우 충진층 높이가 증가할수록, 농도가 낮을수록, 촉매 분사량이 증가할수록 제거효율이 증가하는 것으로 나타났다. 2) Fe(II)-EDTA를 이용한 $SO_2/NO$ 동시처리 기술 개발을 위한 최적의 설계 인자는 충진 높이 =0.5 m, 액체-기체비 = 20 $L/m^3$, 반응기 단수=3단, 반응기 단면적 = 0.025 $m^2$로 결정하였다. 3) 연구 결과를 기초로 $SO_2/NO$의 동시처리 효율을 실험한 결과 각각 95%, 81% 이상 제거가 가능했다. 4) 높은 HTU는 NO의 제거에 있어 유리하지만 과도한 HTU는 스크러버의 운전효율을 감소시키므로 최적의 HTU를 결정하는 것이 필요하다.

종합병원 간호사가 인식하는 환자교육 중요도와 수행도의 관계연구 (A Study on the Perception of the Importance and Performance of Patient Education of the Clinical Nurses)

  • 유은경;서문자
    • 한국간호교육학회지
    • /
    • 제6권2호
    • /
    • pp.287-302
    • /
    • 2000
  • The purpose of the study are to examine the perception of the importance and performance of patient education of the clinical nurse and find out the interfering factors in practicing patient education. The data were collected from convenient sample of 256 clinical nurses working in the nursing units of adult patients except the psychiatric unit, obstetric unit, dental surgical unit and intensive care unit of one University Hospital in Seoul from September 29 to October 2, 1998. Three measurement tools of self-report- questionnaires developed by researcher used. For the content validity of the questionnaires, two sessions of panel discussion and a pilot test were done and finally factor analysis was done with Varimax method. Analysis of data was done with SAS program using frequency, percentage, means, standard deviation, Pearson's Correlation Coefficients, t-test and ANOVA. The obtained results were as follows : 1. The surveyed nurses perceived the importance of patient education at higher level with mean score of 4.08 among 5 point than their perception of practice( mean score : 3.42). 2. There was positive significant correlation(r=.29, p=0.0001)between nurses' perception of the importance of patient education and it's practice 3. Among the teaching contents for patients, 'information of diagnostic procedure and operation' and 'orientation of hospitalization' were perceived most important. And 'preparation for discharge' and 'understanding of disease and health promotion' were perceived least important 4. Among the teaching contents for patients, 'orientation of hospitalization' and 'information of diagnostic procedure and operation' were perceived highly performable. And 'understanding of disease and health promotion' and 'preparation for discharge' were perceived least performable. 5. Three types of interfering factors were identified as patient-factor, situational factor, nurse-factor. The mean degree of impediment with the interfering factors was at average level(3.09 among 5). The patient and situational factors of impediments were more interfering than nurse- factor for teaching patients. 6. In older age(p<.05), married state (p<.05), higher educational status (p<.01), higher clinical experience (p<.01) and higher position(p<.01), the score of perceived importance of patients education was more high. 7. In older age(p<.01), higher clinical experience(p<.001) and surgical unit (p<.01), the score of perceived performance of patients education was more high. In conclusion, in order to activate patient education practice in the clinical setting, the continuing education for patients education should be more emphasized and the effective teaching methods and materials should be developed to help patient teaching. And an organizational support such as budgeting for patient education and reimbursement system should be administrated.

  • PDF

한국에서의 건강영향평가 도입 방안 (Introduction Scheme of Health Impact Assessment in Korea)

  • 김임순;한영한;한상욱
    • 환경영향평가
    • /
    • 제16권6호
    • /
    • pp.511-524
    • /
    • 2007
  • Korea has 30 years of experiences in environmental impact assessment (EIA). Although EIA includes sanitation-public health factor, considering health impacts, among 74 unit projects of 17 sections, health impacts haven't been properly considered or have been ignored in many cases. The increasing awareness on the importance of health impacts has triggered this study to seek an optimal introduction scheme of health impact assessment (HIA). The processes of EIA already include screening, scoping, analysis, impact assessment, consultation, document review, decision making and monitoring, in which they would be the essential parts of HIA. In this context, integrating HIA into the existing EIA process could be the most effective way to use the benefits in both legal and procedural processes existed and to avoid the confusion and overlapping since the close relationships between environment and health impacts might be. Furthermore, it is desirable that the existing sanitation-public health factor should be substituted by and extended to environment-health factor with sufficient determinants to properly consider health impacts. When considering the first step of HIA, the prospective and qualitative approach is suitable more than the retrospective and quantitative one due to the lack of database accumulated. Similarly, an approach based on epidemiology and toxicology could analyze the limited evidences and impacts related to human disease, whereas one based on socio-science and psychology could provide the effective means available for predicting how the people and community will act by the change of surroundings. Checklist approach with various and comprehensive health determinants focused on prospective and qualitative methods will be very useful for more convenient and progressive dissemination of HIA. Various checklist approaches of toolkits could be found from HIA documents elsewhere, for example Westminster Toolkit, and they would be helpful to figure out how to develop common procedures and health determinants for checklist, in which the unique characteristics on korean cultural and political context compared to abroad should be carefully considered since checklist would be the most basic and essential part of HIA. After the establishment of checklist and procedural processes, the pilot projects should be conducted. Main purpose of pilot projects is to apparently prove the effectiveness and profitability of HIA. Pilot projects should be implemented to decide the effectiveness and suitability of HIA for future projects, programs and policies, and should be provided as the positive cases that can be achieved through the proper implementation and progress.

댐체 강화 RIM부 그라우팅을 위한 지반상태 기준 결정 (Determining of Ground Condition Criteria for Dam Reinforced RIM Grouting)

  • 한기승;이동혁;박두희
    • 대한토목학회논문집
    • /
    • 제42권2호
    • /
    • pp.181-186
    • /
    • 2022
  • 댐체 구조물 사면부(RIM부)는 본체와 원지반이 접속하는 매우 중요한 접촉부(interface) 이다. 일반적으로 댐 구조물 사면부 지반보강을 위한 그라우팅 설계시 제한된 자료(시추공, 지질도 등)를 이용하여 계획하기 때문에 사면부 RIM 그라우팅 대상 원지반 특성을 정확하게 고려하여 설계하기는 매우 어려운 실정이다. 또한, 실제 차수성이 확보된 원지반에 설계시 계획된 그라우팅 물량을 천공 주입할 경우에는 차수성이 확보된 원지반이 교란되어 차수효과를 오히려 저해할 가능성도 있다. 이를 극복하기 위해서는 구조물 사면부(RIM) 그라우팅 수행 전에 지질여건을 우선적으로 고려하고 현장수리시험을 통하여 원지반에 대한 최적의 그라우팅을 실시여부를 결정하는 것이 기초처리 대상 지반의 차수성 확보에 매우 적합하다고 판단된다. 본 논문에 적용된 RIM부 그라우팅 판단여부를 결정하기 위하여 대상 구간의 사면구간 암반에 대하여, 파일럿 홀(Pilot hole) 수압시험 수행 분석결과 1 Lugeon 이하의 차수성을 나타내며, 시멘트 주입량 역시 1 kg/m 이하의 주입결과를 나타낸다. 이때는 그라우팅을 실시하는 것이 오히려 역효과가 난다고 판단된다. 이 시험결과 수치는 사면 절취시 육안관찰과 지질도 작성결과를 이용하여 분석할 때 댐 설계 기준인 1 Lugeon 이하의 경우가 되어, 괴상(Massive)의 차수성이 어느 정도 확보된 암반으로 평가할 수 있다. 따라서 댐체 구조물 사면부에 RIM 그라우팅의 실시 결정기준은 암반상태에서 1 Lugeon 차수성이고, 시멘트 주입량 역시 1 kg/m을 기준으로 하여 RIM 그라우팅 실시여부를 결정하는 것이 바람직하다고 판단된다.