• Clean Technology
• /
• v.16 no.1
• /
• pp.39-45
• /
• 2010

In this paper, 4 bundle modules of PVDF hollow fiber membrane from Woori Tech company (Korea) were manufactured in a treatment capacity of 10 ton/day. A membrane bioreactor (MBR) pilot plant was installed at Sooyoung Wastewater Treatment Plant in Busan. An alternating aeration process was selected to avoid the concentration profile of suspended solid (SS) in the MBR. For stable operation, raw wastewater with mixed liquor suspended solid (MLSS) of about 1,000 ppm, which was in-flowed from the aeration tank of the wastewater treatment plant, was fed and filtered through the pilot plant. Subsequently the pilot plant were washed three times with washing water: once with ethanol solution, once with a solution of 5% NaOCl, and finally with washing water. After the chemical washing, the remaining water in the MBR was fed into the pilot plant. As a result, the SS removal efficiency was found to be more than 99.9%. The amount of filtrate with the aeration tank influent decreased by 16%, compared with that from the initial conditions, giving rise to 30% increase in the suction pressure. These results were used to set up continuous operation conditions. The results from the continuous operation with influent MLSS of 1,900 mg/L showed that the SS removal efficiency was about 99.99% and that the amount of filtrate and the suction pressure were $42{\sim}52L/m^2$ and 16~20 cmHg, respectively, indicating stable operation of the pilot plant. However, for the reuse of wastewater, methods need to be sought to avoid growth of algae which affects the SS removal efficiency at inlet and outlet of the permeate tank.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1299-1304
• /
• 2010

We examined the working fracture behavior of a silicon-steel strip caused by deformation deviation by performing a pilot rolling test. The deformation deviation resulted in the edges (or center portion) of the strip being stretched and the other parts being compressed in the rolling direction; this was because of different degrees of deformation in these parts. We designed roll grooves shape to reflect the role of roll bending, which generates waviness in the strip in an actual cold rolling process, into the pilot rolling test. The material used in the rolling test was highsilicon steel (about 3%). The results of the test showed that the type of fracture in the strip specimen varied with the magnitude of the deformation deviation. The tensile stress produced at the strip edges because of the center waviness in the rolling direction was a crucial factor that resulted in edge cracking and a zigzag-shaped fracture at the center.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.70.1-70.1
• /
• 2021

We examine the HI gas kinematics and distributions of galaxy pairs in group or cluster environments from high-resolution Australian Square Kilometer Array Pathfinder (ASKAP) WALLABY pilot observations. We use 32 well-resolved close pair galaxies from the Hydra, Norma, and NGC 4636, two clusters and a group of which are identified by their spectroscopy information and additional visual inspection. We perform profile decomposition of HI velocity profiles of the galaxies using a new tool, BAYGAUD which allows us to separate a line-of-sight velocity profile into an optimal number of Gaussian components based on Bayesian MCMC techniques. Then, we construct super profiles via stacking of individual HI velocity profiles after aligning their central velocities. We fit a model which consists of double Gaussian components to the super profiles, and classify them as kinematically cold and warm HI gas components with respect to their velocity dispersions, narrower or wider 𝜎, respectively. The kinematically cold HI gas reservoir (M_cold/M_HI) of the paired galaxies is found to be relatively higher than that of unpaired control samples in the clusters and the group, showing a positive correlation with the HI mass in general. Additionally, we quantify the gravitational instability of the HI gas disk of the sample galaxies using their Toomre Q parameters and HI morphological disturbances. While no significant difference is found for the Q parameter values between the paired and unpaired galaxies, the paired galaxies tend to have larger HI asymmetry values which are derived using their moment0 map compared to those of the non-paired control sample galaxies in the distribution.

• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.8-14
• /
• 2014

The transmission control method of a small forklift is classified into a pilot control method and a direct control method. In the pilot control method, the complex hydraulic circuit consists of many components, making the production process too costly and time consuming. The direct control method contains fewer components that can be configured to simple hydraulic circuits. As another advantage, the input profile easily changes the shift sensitivity of the transmission. Therefore, this research considers the characteristics of the direct control method in the development of hydraulic system design. This paper will present a simulation of the direct control transmission using AMESim. First, modeling of the direct control method is obtained and simulated with real parameters. The simulation results then are carried out and compared with the experimental results to verify and analyze the characteristics of the direct control method.

• Clinical and Experimental Reproductive Medicine
• /
• v.35 no.3
• /
• pp.223-229
• /
• 2008

Objective: This pilot study was performed to investigate the effect of metformin on insulin resistance, hormone levels, and lipid profiles in non-obese patients with polycystic ovary syndrome. Methods: This study included 16 non-obese patients with polycystic ovary syndrome diagnosed at our hospital from June 2006 to September 2007. Blood samples were collected before and 6 months after metformin treatment for analysis of fasting serum glucose levels, fasting serum insulin levels, a glycemic response to 75 g oral glucose tolerance test (OGTT), and hormonal blood profile including FSH, LH, estradiol, testosterone, free testosterone, serum lipid profiles. Insulin resistance was estimated by calculating fasting glucose/insulin ratio (FGIR), 2 hr glucose/insulin ratio after 75 g glucose load. And we investigated insulin resistance and pancreatic beta cell function by calculating HOMA beta cell function and HOMA IR. Results: After the treatment of metformin, there was significant increase in 2 hr glucose/insulin ratio after 75 g glucose load (p=0.04) and decrease in HOMA IR (p=0.000). But serum lipid profiles did not change significantly. Also the metformin treatment induced a significant reduction in serum free testosterone and LH levels, and LH/FSH ratio (p=0.001, p=0.000, p=0.034). Conclusion: This pilot study showed that metformin might be effective in improving insulin sensitivity, ameliorating hyperandrogenemia in non-obese patients with polycystic ovary syndrome. Further investigations with larger number of patients and long-term observations are necessary to determine the role of metformin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.711-717
• /
• 2017

Startability and harmful emissions are the main issues in diesel engine development under cold conditions. The characteristics of combustion with multiple injection were investigated under cold start conditions. For quantitative analysis, the in-chamber pressure profile was measured and combustion visualization using direct imaging was accomplished. With multiple injection, the peak in-chamber pressure and heat release rate were increased compared to single injection. In addition, the period of flame luminosity detection was shortened using multiple injection. Combustion by main injection was improved with an increase in heat released by pilot combustion when the pilot injection quantity was increased. Finally, an increase in injection pressure also showed the possibility of combustion improvement. On the other hand, an increase of in the pilot injection quantity and injection pressure can cause an increase in harmful emissions, such as HC and CO due to wall wetting. Therefore, more sensitive calibration will be needed when applying a multiple injection strategy under cold start conditions.

• Journal of Korean Dental Science
• /
• v.16 no.1
• /
• pp.35-46
• /
• 2023

Purpose: Culture-based methods for microbiological diagnosis and antibiotic susceptibility tests have limitations in the management of orofacial infections. We aimed to profile pus microbiota and identify antibiotic resistance genes (ARGs) using a culture-independent approach. Materials and Methods: Genomic DNA samples extracted from the pus specimens of two patients with orofacial abscesses were subjected to shotgun sequencing on the NovaSeq system. Taxonomic profiling and prediction of ARGs were performed directly from the metagenomic raw reads. Result: Taxonomic profiling revealed obligate anaerobic polymicrobial communities associated with infections of odontogenic origins: the microbial community of Patient 1 consisted of one predominant species (Prevotella oris 74.6%) with 27 minor species, while the sample from Patient 2 contained 3 abundant species (Porphyromonas endodontalis 33.0%; P. oris 31.6%; and Prevotella koreensis 13.4%) with five minor species. A total of 150 and 136 putative ARGs were predicted in the metagenome of each pus sample. The coverage of most predicted ARGs was less than 10%, and only the CfxA2 gene identified in Patient 1 was covered 100%. ARG analysis of the seven assembled genome/metagenome datasets of P. oris revealed that strain C735 carried the CfxA2 gene. Conclusion: A metagenomics-based approach is useful to profile predominantly anaerobic polymicrobial communities but needs further verification for reliable ARG detection.

• The Journal of Korean Academy of Sensory Integration
• /
• v.1 no.1
• /
• pp.1-8
• /
• 2003

Objective : To describe the sensory-based behaviors of children with developmental disorders as reported on the JSI-2. Methods : The scores of children with disability were compared with those of children without disability. JSI-2 was completed by parents of 38 children with disability 3 through 6 years of age and 36 children without disability 3 through 6 years of age. Results : The scores of children with disability were significantly different from that of children without disability for 6 of 8 factors, including vestibular, tactile, auditory, visual and other. There is no significant differences of age or sex. Conclusion : From this study, it is found that children with disability have deficit in a variety of sensory processing abilities as measured by JSI-2. Further research is needed to replicate and develop these findings.

• Journal of the Korean Society of Combustion
• /
• v.3 no.1
• /
• pp.1-10
• /
• 1998

Lots of techniques are adopted for a flame stabilization and a high-load combustion. But the techniques being used were passive control method which have to change combustor shape like pilot flame, flame stabilizer, pressure profile, etc. Active control method which is not necessary to transform its shape is employed. Acoustical excitation is broadly used for its convenience in changing frequency and intensity. Both acoustical excitation and flame stabilizers were adopted to study their relationship. So, we investigated flammability limits. Flame visualization. And mean temperature in the condition of various frequencies, intensities, and flame stabilizers. As a consequence, flammability limit were advanced in acoustically excited flame at some frequencies. Coherent structure was extended to the downstream region through acoustical excitation and a size of vortice was curtailed. Also width of recirculation zone was magnified. In addition, Effects of acoustical excitation was stood out at 25mm flame stabilizer rather than another ones.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.135-136
• /
• 2006

계통의 전압 안정성을 향상시키기 위해서는 무효전력의 원활한 수급이 필요하다. 무효전력은 지역적 특성이 다르고 국지적인 영향을 받기 때문에 전체 계통의 전압을 동일한 기준으로 관리 및 제어하기는 어렵다. 이러한 문제를 해결하기 위해서 프랑스 EdF와 이탈리아 CESI에서는 전체 계통을 계통 특성이 반영된 소규모 지역들로 구분하고 지역 내 주요모선의 감시를 통한 지역별 전압 제어 방안을 연구하여 실 계통에 적용하고 있다. 본 논문에서는 지역별 전압 감시 및 제어를 위해 지역의 전압 특성을 가장 잘 나타내는 대표 모선 선정 방안을 소개하고 시험 계통에 적용하여 적절성을 검증한다.