• 항공우주시스템공학회지
• /
• 제5권2호
• /
• pp.12-17
• /
• 2011

Pilot and flight crew visual performance in general aviation aircraft operating is paramount for safe operation of the aircraft. Pilot compartment view, instrument and cockpit lighting forms an essential aspect of this visual performance, and therefore warrants guidance and standardization. This study introduces acceptable design criteria for pilot compartment view, instrument and cockpit illumination for general aviation aircraft.

• 대한조선학회논문집
• /
• 제31권2호
• /
• pp.38-44
• /
• 1994

1960년대 Auto-Pilot 시스템이 대양을 항해하는 선박에 장착되면서 운항경제성 및 선원 승선감의 견지에서 Auto-Pilot시스템의 제어 알고리듬이 연구되기 시작하였다. 초기에는 PD제어로 시작하였으나 잦은 타동작으로 인한 기구 마모를 줄이기 위해 실제 선수각과 설정선수방위 차가 어느 상한치 이상에서만 타각을 조작하는 on-off 제어를 도입하였다. 본 논문에서는 Auto-Pilot 시스템의 제어 알고리듬에 optimal제어, adaptive제어 등을 적용하여 제어기법간의 비교를 cost function을 통하여 수행함으로써 Auto-Pilot 시스템에 대한 최적의 제어기법을 조사하였다. Adaptive 제어를 위한 선박 조종운동방정식의 parameterization 과정을 검토하였고 adaptive 알고리듬의 장점이 파라미터 추정이 잘못된 경우의 수치시뮬레이션 결과로부터 분명히 알 수 있었다.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.42-49
• /
• 2018

Pilot Aptitude Research Equipment (PARE) is a simulator developed to measure or research pilot aptitude and train for student pilots. Design of an ergonomic PARE operation console is required to operate the equipment effectively. This study carried out five steps : (S1) operator questionnaire survey, (S2) anthropometric design formula development, (S3) usability evaluation, (S4) improvement design, and (S5) validation considering both Physical User Interface (PUI) and Graphic User Interface (GUI) of PARE operation console. The operator questionnaire surveyed needs for each PUI and GUI part of the console from two PARE actual operators. In terms of PUI, the anthropometric design formula was developed by using design variables, body dimensions, target population characteristics, and reference posture related to the PARE console. In terms of GUI, the usability evaluation was conducted by three usability testing experts with a 7-point scale (1 : very low, 4 : neutral, 7 : very high) on GUI of the PARE operation console by seven usability criteria. The improved PARE operation console was designed to reflect the optimal values of design variables calculated from design formula, the results from usability testing, and the operator's needs. The improvement effect was observed by 20 people who had experience with the PARE operation console. As a result of the validation, monitor visibility and cockpit visibility for the improved PUI design and visibility and efficiency for the improved GUI design were significantly increased by more than 90% respectively. The improved design of the PARE operation console in this study can contribute to enhance operation performance of the PARE.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.102-108
• /
• 2010

In this study, the authors investigate the basic characteristics of a two stage directional control valve with pilot spool assembled in main spool coaxially. The step response characteristics and effects of major design parameters' values on valve performances arc clarified through numerical simulations. In addition, the authors examined the possibility of applying the object valve for this study as a proportional control valve. Based on the numerical simulation results, new design values for the reformed design as a proportional control valve were suggested.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.108-113
• /
• 2004

Korea Gas Corp. has developed the design technology of the LNG storage tank. The membrane to be applied inside of the LNG storage tank is provided with corrugations to absorb thermal contraction and expansion caused by LNG temperature changes. It is very important to measure their thermal strains under LNG temperatures by analytical and experimental stress analysis of the membrane. We have developed a stress measurement system using strain gages and measured the strain during cooldown and storing the LNG. We also analyzed the measured data by comparison with the FEM data. On the basis of these results, we could design and assure the application of the Kogas Membrane to large scale LNG storage.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.116.2-116
• /
• 2001

Korea Institute of Energy Research(KIER) has designed the 3MW pilot scale wet FGD process based on the experimental results of the bench scale FGD system which can treat 150 m3/hr of flue gases. The effects of process chemistry, packing material, and operating variables including L/G ratio, pH, scrubber pressure drop were investigated. In cooperation with Kyunggi Chemicals, the 3MW pilot scale plant was established on the industrial site at Onsan, Korea. This system has been operating since October 1999. This paper introduces an outline of the design features of the pilot plant and discusses its operational results.

• 한국항공운항학회지
• /
• 제13권2호
• /
• pp.63-71
• /
• 2005

There is a concern in the aviation community that pilot schedules can lead to fatigue and increased chance of an aviation accident. Yet despite this concern, there is little empirical studies showing the relationship between pilot fatigue and commercial aviation accidents. At this point of view, countering fatigue is a challenging proposition in complex aviation operations. However, with appropriate planning, many strategies can contribute to pilot alertness and flight safety. With proper education program, sustaining a physiological fit, a right knowledge about pilot fatigue can design a safety operations. On this study, I inquire into the ways of enhancing pilot's efficiency from fatigue.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.489-496
• /
• 2003

Korea Gas Corporation has recently constructed a LNG pilot tank with 1, 000㎥ capacity in Incheon, Korea. The main objective of this pilot tank construction is to accumulate field data under different operating conditions for the future use in design procedure, construction, and maintenance. As the part of the project, a field dynamic test, so-called modal test, is performed to obtain the dynamic characteristics of the pilot tank. This paper describes the instrumentation and measurement Process used in the testing. From the measured Frequency Response Functions (FRFs), resonant frequencies and corresponding mode shapes of the tank are extracted and provided. Also, these results are compared to those calculated from a finite element model. The change of dynamic characteristics of the pilot tank due to the effect of internal fluid and the possible structural deterioration will be investigated in near future.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.47-57
• /
• 1995

Rice Processing Complex(RPC) have being constructed with a rice mill plant and a facility of drying and storage to overcome problems caused by UR and to produce good quality of rice. An optimal design of a rice mill plant was required to successfully construct and operate it. The development of a simulation model was essential to the design of a rice mill plant. So, all the objectives of this study were to develop a simulation model for the design of a rice mill plant and to develop and evaluate the rice mill system. In this study the simulation model was developed to design a rice mill plant using SLAMSYSTEM, one of simulation languages. The results of this study were as followings. 1. A simulation model was developed with SLAMSYSTEM to represent the processes of a rice mill plant. The simulation model was used to design a rice mill pilot plant with the capacity of 0.5 ton per hour. The rice mill pilot plant was analyzed by the model with alternatives. 2. In the simulation the rice mill system was much influenced by the separating efficiency of a brown rice separator. Especially, the bottleneck of grain flow occurred at the buffer tank for brown rica. separator under 50% separating efficiency of brown rice separator. Hence, as the alternative simulation was conducted under 60% , 70% separating efficiency of brown rice separator, the bottleneck of the system could be minimized at the 60% separating efficiency of brown rice separator. 3. In the alternative simulation the bottleneck of the system was minimized under the hulling capacity of 1 t/h and 60% separating efficiency of brown rice separator with the capacity of 1 t/h. Under such a condition the max. weight of waiting entities at buffer tanks was less 250kg. So, the capacities of the buffer tanks were determined in the basis of simulation results. 4. The milled rice recovery and head rice recovery of the milling system were 74% and 92% in the simulation, respectively. These results of simulation almost corresponded to those of actual rice mill plants. The developed simulation model could be well applied to design a rice mill plant.

• 한국전자파학회논문지
• /
• 제13권10호
• /
• pp.998-1004
• /
• 2002

본 논문은 하나의 파일롯 신호를 이용하여 다중 캐리어를 수용하는 IMT-2000 전 대역에서 동작하는 중계기용 Feedforward 선형증폭기의 설계 및 제작에 관한 것이다. 본 논문에서 제시한 방법은 기존에 나와있는 파일롯 신호 인가 방법과는 달리 하나의 파일롯 신호를 분기하여 첫번째 루프(혼변조 신호 추출 루프)와 두번째 루프(혼변조 신호 제거 루프)에 인가함으로써, 증폭기에 입력되는 입력신호의 주파수와 레벨의 변화에 따라 자동 적응적으로 혼변조 신호들을 제거하도록 설계하였다. 제작 결과 2110 MHz - 2170 MHz 주파수 범위에서 최종 출력이 20 W$_{avg}$ 일 때 임의의 20 MHz에서 IMD 특성이 -60 dBc 이하가 됨으로써 20 dB 이상을 개선시켰으며 제안된 선형증폭기는 중계기의 다중캐리어 선형증폭기로서 적합함을 확인하였다.