• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.101-106
• /
• 2011

There are various methods in the flat panel display manufacture. The cost reduction effect is very big in case of using the screen printing method. The screen printing method is much used in the process of forming PDP barrier and can apply to the process of arranging the pillars for maintaining the vacuum gap of the vacuum glazing panel. The pillar which is one of the core elements for comprising vacuum glazing maintains the vacuum gap overcoming the vacuum pressure difference with the atmospheric pressure generated in vacuum glazing. At the same time, the deformation phenomenon by vacuum pressure is relived. In this paper, by using FEM about three considered in the pillar design and arrangement kinds of limiting factors, the simulation was performed. The pillar optimum arrangement method at within the maximum allowable tensile stress and heat transfer coefficients according to the arrangement try to be presented based upon the analyzed result data review and this validity tries to be verified by FEM.

• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.73-78
• /
• 2012

In this study, the optimal process condition was induced about the pillar arrangement process of applying the screen printing method in the manufacture process of vacuum glazing panel. The high precision screen printing is technology which pushes out the paste and spreads it by using the squeegee on the stainless steel plate in which the pattern is formed. The screen printing method is much used in the flat panel display field including the LCD, PDP, FED, organic EL, and etc for forming the high precision micro-pattern. Also a number of studies of screen printing method have been conducted as the method for the cost down through the improvement of productivity. The screen printing method has many parameters. So we used Taguchi method in order to decrease test frequencies and optimize this parameters efficiently. In this study, experiments of pillar arrangement were performed by using Taguchi experimental design. We analyzed experimental results and obtained optimal conditions which are 4 m/s of squeegee speed, $40^{\circ}$ of squeegee angle and distance between metal mask and glass.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.49-54
• /
• 2010

Windows are still the thermally weakest part in considering energy efficiency. The vacuum glazing is considered as a new alternative in terms of energy efficiency. Vacuum glazing are consisting of two separated glass, pillars are support the under and upper glass. Therefore in this paper suggested the pillar shapes and array arrangements method using Finite Element Method and validity were proved by comparing and analyzing with the research that it is announced through the existing experiment. It is considered to solve pillar shapes and arrangement method problem of the vacuum glazing using proposed FEM analysis.

• 건축역사연구
• /
• 제14권1호
• /
• pp.71-87
• /
• 2005

4 royal palaces are currently remained from capital city (Seoul) of 'Cho-Sun(朝鮮)' period. In these palaces, 'Main hall of Royal Palace(正殿)' is the center of the Royal Palaces. The 'Main hall of Royal Palace' of the Royal Palace was the best building of that time. Therefore there were many studies about the 'Main hall of Royal Palace'. But these studies were individual studies of these 'Main hall of Royal Palace'. Therefore, this study is to analyze and compare 4 'Main hall of Royal Palace' of the Royal palaces. It is to study the proportion regarding the Diameter of the pillar, the Height, the pillar and pillar Interval's Distance, and the arrangement of 'Kong-Po(bracket sets)'. With these studies, it is to prove that the 'Main hall of Royal Palace' is the building which high construction technique of this time is expressed. Result of this study is as followings; First, the proportion of pillar height(H) to its diameter(D) average from H=8.0 to 8.5D. Only the Myeong-Jeong-Jeon omitted the 'Go-Ju(高柱)' in the 'Toi-Kan (退間)' to place Ea-Jwa(御座). Second, Second, the proportion of diameter of the pillar of 'Eoi-Bu-Pyeong-Ju(外部平柱)' and 'Nae-Jin-Go-Ju(內陣高柱)' average D1(Diameter of 'Eoi-Bu-Pyeong-Ju') =0.91D2 (Diameter of 'Nae-Jin-Go-Ju'). In regards to the height, the single floor 'Main hall of Royal Palace' and double floor 'Main hall of Royal Palace' seems to be different. The height proportion of the double floor 'Main hall of royal palace' is H1(Height of 'Eoi-Bu-Pyeong-Ju')=0.34H2(Height of 'Nae-Jin-Go-Ju') and single floor 'Main hall of Royal Palace' has a proportion of H1=0.62H2. Third, in Geun-Jeong-Jeon, with the proportion of height and diameter of the pillar, interval's distance between pillars and diameter, the pillar interval distance and height, of 'Ea-kan(御間)' from the 'Toi-Kan' is different from 'Main hall of Royal Palace'. This is because the structure of 'Toi-Kan' of Geun-Jeong-Jeon is not stable. In order to reinforce this, 'Gui-Go-Ju(隅高柱)' of the Geun-Jeong-Jeon jut out $4{\sim}7%$ more compared to In-Jeong-Jeon. Fourth, when comparing double floor 'Main hall of royal palace' of Geun-Jeong-Jeon and In-Jeong-Jeon, based on distance of 'Eoi-Bu-Pyeong-Ju' and 'Nae-Jin-Go-Ju' of lower level, the 'Sang-Bu-Pyeong-Ju(上部平柱)' of Geun-Jeong-Jeon jut out $4{\sim}7%$ more compared to the In-Jeong-Jeon and also It becomes thicker. Fifth, the arrangement of 'Kong-Po' on the front row of 'Gan(間)' had to do with the change of side 'Gan'. Even though the Geun-Jeong-Jeon and the In-Jeong-Jeon were double floors, the arrangement of the 'Kong-Po' is different because the number of side bay is different.

• 한국태양에너지학회 논문집
• /
• 제35권1호
• /
• pp.61-68
• /
• 2015

The advanced counties effort to the supplement of the zero energy buildings for the global building energy saving. In the middle of the development of passive technology, the government has to effort to the energy saving of buildings by enhanced performance of the window thermal insulation. By the method of enhanced performance of window thermal insulation, the use of vacuum double glazing saves the energy consumption in building. This glazing has low U-value(heat transmission coefficient) than normal double glazing. The vacuum glazing enhanced thermal insulation performance by vacuum space of between the glass and glass. For this vacuum glazing, pillar maintain the space between glass and glass. But this structure cause the raising the heat transmission coefficient in pillar approaching glass. This study confirmed the U-value by the test method of thermal resistance for windows and doors. Also this study confirmed the variation of heat transmission coefficient by the structure of vacuum glazing. And this study measured the surface temperature of the vacuum glazing about pillar approaching glass and vacuum space in cool chamber and hot box. That result, this study confirmed U-value of $0.422W/m^2{\cdot}K$ of vacuum glazing. Also this study confirmed U-value of $0.300{\sim}0.422W/m^2{\cdot}K$ by various the structure of vacuum glazing. And this study confirmed the heat flow in pillar approaching glass.

• 마이크로전자및패키징학회지
• /
• 제26권1호
• /
• pp.35-39
• /
• 2019

현재까지 다공성 알루미나 구조물은 대표적으로 양극산화 방법으로 구현되어 오고 있다. 양극산화 방법을 통해 규칙적인 배열을 가진 알루미늄 산화 피막은 쉽게 만들 수 있지만, 복합 구조물 형태를 가진 산화피막은 상대적으로 구현하기가 어렵다. 본 연구는 인산용액에서 양극산화 인가전압에 따른 피막 기공 크기, 두께 및 구조물 형태 변화를 관찰하고자 한다. 다층 복합 산화물 구조물 구현을 위해 양극산화 인가전압 조건을 조절하였고, 실험 조건은 10% 인산용액에서 양극산화 인가전압 100 V와 120 V로 각각 수행하였다. 실험 결과는 각 조건에 따라 다공성 구조물과 복합 구조물 형태의 산화물 구조를 구현할 수 있었다.

• 한국농촌건축학회논문집
• /
• 제10권3호
• /
• pp.59-66
• /
• 2008

This study was performed to ascertain how HyangGyos based on national ideology were built in Jeju Island and what their detailed styles are. In Jeju-HyangGyo, unique architectural characteristics are shown as they have been built in an island independent from the mainland. Also up-down system was well reflected in detailed architectural styles. The main temple of Jeju-HyangGyo was built in the type of one-Chulmok(a subsidiary material of Gongpo and a piece of wood to support the eaves) of which ancon supports a purline from the center of a pillar and two-Ikgong(a piece of wood engraved to put on an ancon), but in the case of the lecture hall, its Gongpo(a piece of wood to support the eaves) was inferior in quality. In the case of Jeju abutments were used in main temples and fire walls were mostly used. In particular, their abutments are difficult to be observed in HyangGyo in the mainland. It is presumed that the abutment and the fire wall used in Jeju Island might be the best solution to protect structures from rain and moisture. To sum up, local characteristics and traditional rules were thoroughly reflected in Jeju-HyangGyos built in Jeju Island from the aspect of arrangement and detailed style. In conclusion, it is significant that architectural styles, not to mention the other aspects of Jeju culture, were suitably adapted to Jeju Island.

• 한국농촌건축학회논문집
• /
• 제12권1호
• /
• pp.33-40
• /
• 2010

HyangGyo had been built for teaching peoples as a place of educational practice, and also for the order and stability of country through Confucianism. This study analyzed and researched the building structure of Daejeong-HyangGyo in Jeju Island In Daejeong-HyangGyo, unique architectural characteristics are shown as they have been built in an island independent from the mainland. Also up-down system was well reflected in detailed architectural styles. The main temple of Daejeong-HyangGyo was built in the type of one-Chulmok(a subsidiary material of Gongpo and a piece of wood to support the eaves) of which ancon supports a purline from the center of a pillar and two-Ikgong(a piece of wood engraved to put on an ancon), but in the case of the lecture hall, its Gongpo(a piece of wood to support the eaves) was inferior in quality. In the case of Jeju abutments were used in main temples and fire walls were mostly used. In particular, their abutments are difficult to be observed in HyangGyo in the mainland. It is presumed that the abutment and the fire wall used in Jeju Island might be the best solution to protect structures from rain and moisture. To sum up, local characteristics and traditional rules were thoroughly reflected in Dajeong-HyangGyos built in Jeju Island from the aspect of arrangement and detailed style. In conclusion, it is significant that architectural styles, not to mention the other aspects of Jeju culture, were suitably adapted to Jeju Island.

• 한국농촌건축학회논문집
• /
• 제26권2호
• /
• pp.35-40
• /
• 2024

This study examines the classification and typical characteristics of 148 owner shop houses existing in the historical city center of Cheongju. First, they can be classified into single-story, middle-story, and divided types according to the distribution of residential and commercial functions. The single-story(36) has 'ㅡ', 'ㄱ', and 'narrow and deep'-shaped arrangement, with stores on the front and houses on the rear. The middle-story second floor(89) is divided into a first-story store and a second-story house, and the third floor(23) has different functions for each floor, but more than half of them have houses on the second and third floors. Among the total, there are also 16 cases in which the division type is taken with different construction times and structures. Second, in the position of the stairs connected to the upper floor among the middle-floor types(112), the outer stair type(52) to separate from the living space while making the most of the stores on the first floor accounts for 47%, but the biggest feature is that the inner staircase type(34) with privacy reaches 30%. The rear stair room type(26) entering through alleyways or private yards is also 23%. Third, the front pillar spacing varies from 1bay to 4bay in appearance, but the 2bay type on the 2nd floor and the 1bay type on the 3rd floor occupy the largest proportion. This exterior type is a characteristic of a owner shop house that can measure the range of personal ownership. Despite the conflicting functions of stores and houses, 35~40% of the cases are in which the opening positions of the upper and lower floors are unified.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.761-770
• /
• 2017

본 연구는 근린재생이 필요한 저층밀집주거지역의 연립주택 하부 필로티 공간을 대상으로 커뮤니티 활동을 수용할 수 있는 방안을 제안하는데 목적이 있다. 협소한 주차공간에 미치는 영향을 최소화하기 위해, 벽식 구조는 배제하고, 필로티의 기둥 사이 유휴공간에 수요자 요구시설을 모듈(Prefabricated frame)을 설치하여 활용할 수 있는 계획을 제안하였다. 모듈을 사용할 경우, 단기간에 미리 제작된 프레임을 조립하는 방식으로 공기단축, 비용절감은 물론 소음 등으로 인한 민원발생을 최소화할 수 있다는 장점이 있기 때문이다. 또한 거주자 요구에 따라 다른 형태로 축소, 확대한 프레임을 연결할 수 있다는 측면에서 긍정적인 효과를 기대할 수 있다. 거주자 면담조사와 필로티 실태 조사를 통해 택배보관소, 휴게공간, 문화 공간, 쓰레기 처리 공간 등이 필요로 하다는 것을 도출할 수 있었다. 이를 해소하기 위해 본 연구에서 제안한 모듈은 4가지로, 삼각모듈, 퍼즐모듈, 박스모듈, 경첩모듈이다. 각각의 장점과 단점을 정리하고, 향후 보완방향을 제안함으로써 활용 가능성을 시사하였다.