• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.54-54
• /
• 2018

숨은물뱅듸 산림유전자원 보호구역은 해발 950 m 이상 지역의 습지로서 오름으로 둘러싸인 넓은 웅덩이 형태로 환경부 멸종위기 2급 야생식물인 자주땅귀개를 비롯한 다양한 습지 식물과 이를 둘러싸고 있는 산림지역을 포함하여 산림청에서는 산림유전자원 보호구역으로 지정 관리되고 있다. 본 조사는 숨은물뱅듸 산림유전자원 보호구역을 대상으로 식물상을 조사하여 식물종 다양성을 보존하기 위한 기초자료를 만들기 위해 실시하였다. 본 연구는 2018년 7월 24일부터 8월 28일까지 총 4회에 걸쳐 현장조사를 통하여 표본을 채집하고 기록하여 정리하였다. 그 결과, 숨은물뱅듸에 자생중인 식물은 양치식물 8과 11속 17종 17분류군, 나자식물 2과 2속 2종 2분류군, 피자식물 56과 121속 167종 5변종 1품종 173분류군 총66과 134속 186종 5변종 1품종의 총 192분류군이 조사되었다. 이 중 환경부 멸종위기야생식물은 자주땅귀개 1종이 확인되었고, 제주특산식물 6분류군, 한국특산식물 2분류군이 확인되었다. 식물구계학적특정식물은 총37분류군이며 V등급 5분류군, IV등급 5분류군, III등급 12분류군, II등급 5분류군, I 등급 10분류군이 확인되었다. 한국의 적색목록 식물은 위기(EN) 1분류군, 취약(VU) 1분류군, 준위협(NT) 1분류군, 관심대상(LC) 6분류군, 미평가(NE) 3분류군으로 나타났다. 조사된 식물들 대상으로 생활형을 분석해보면, 휴면형은 Ch 47분류군으로 가장 많이 나타났고, G(30분류군), MM(24분류군), HH(23분류군) 순으로 나타났다. 번식형은 R5가 101분류군, 산포기관형은 D4가 84분류군, 생육형은 e가 89분류군으로 가장 많이 나타났다. 반면, 외래식물 1분류군이 출현한 것으로 보아 숨은물뱅되는 아직까지 보전이 잘 되어 있고, 식물종다양성이 우수하며 식물학적으로 가치가 매우 높은 것으로 판단되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.295-295
• /
• 2014

일반적으로 박막 태양전지의 효율은 박막 종류에 따른 광 흡수율에 의해 결정되며, 이는 증착한 박막의 두께에 의해 결정된다. 증착한 박막의 두께가 두꺼워질수록 광 흡수율은 증가하지만, 박막 두께가 지나치게 두꺼워지면 열화 현상으로 인한 모듈의 효율 감소가 생기므로 적절한 박막의 두께가 요구된다. 특히 a-Si:H의 경우 가시광 영역에서 높은 흡수계수를 가지고 있어서 얇은 박막 두께로도 태양전지의 제작이 가능하지만, 동일한 박막 두께에서 효율을 더욱 향상시키기 위한 다양한 광 포획 기술에 대한 연구가 많이 진행 되고 있다. 본 연구에서는 자외선을 이용한 nano-imprint lithography 기술을 이용하여 a-Si:H 태양전지의 유리기판 위에 pattern을 삽입하여 광 산란 효과를 향상 시키고자 하였다. 또한 유리기판의 굴절률 (n=1.5)과 투명전극의 굴절률 (n=1.9)의 중간 값을 갖는 ZnO nanoparticles (n=1.7)이 분산 된 imprinting resin을 사용함으로써 점진적으로 굴절률을 변화시켜, 최종적으로 a-Si:H 층까지의 광 투과율을 높이고자 하였다. 제작한 기판의 종류는 다음과 같다. 첫 번째 기판으로는 유리기판 위에 ZnO nanoparticles이 분산 된 imprinting resin을 spin-coating 하여 점진적인 굴절률의 변화에 의한 투과도 향상을 확인하고자 하였다. 두 번째 기판으로는 규칙적인 배열을 갖는 micro 크기의 패턴을 형성하였다. 마지막으로는 불규칙한 배열을 갖는 nano 크기와 micro 크기가 혼재 된 패턴을 형성하여 투과도 향상과 동시에 빛의 산란을 증가시키고자 하였다. 후에 이 세가지 종류를 기판으로 사용하여 a-Si:H 기반의 박막 태양전지를 제작하였다. 먼저 제작한 박막 태양전지용 기판의 광학적 전기적 특성을 분석하였다. 유리 기판 위에 형성한 패턴에 의한 roughness 변화를 확인하기 위해 atomic force microscopy (AFM)를 이용하여 시편의 표면을 측정하였다. 또한 제작한 유리 기판 위에 투명 전극층을 형성 후, 이로 인한 전기적 특성의 변화를 확인하기 위해 hall measurement system을 이용하여 sheet resistance, carrier mobility, carrier concentration 등의 특성을 측정하였다. 또한, UV-visible photospectrometer 장비를 이용하여 각 공정마다 시편의 광학적 특성(투과도, 반사도, 산란도, 흡수도 등)을 측정하였고, 최종적으로 제작한 박막 태양전지의 I-V 특성과 외부양자효율을 측정하여 태양전지의 효율 변화를 확인하였다. 그 결과 일반적인 유리에 기판에 제작된 a-Si:H 기반의 박막 태양전지에 비해, ZnO nanoparticles이 분산 된 imprinting resin을 spin-coating 하여 점진적인 굴절률 변화를 준 것만으로도 약 12%의 태양전지 효율이 증가하였다. 또한, micro 크기의 패턴과 nano-micro 크기가 혼재된 패턴을 형성한 경우 일반적인 유리를 사용한 경우에 비해 각각 27%, 36%까지 효율이 증가함을 확인하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.59-75
• /
• 2016

Reduced or black $TiO_{2-x}$ materials with oxygen-deficiency have been achieved by creating oxygen vacancies and/or defects at the surface using different methods. Fascinatingly, they exhibited an extended absorption in VIS and IR instead of only UV light with bandgap decrease from 3.2 (anatase) to ~1 eV. However, despite the dramatic enhancement of optical absorption in black $TiO_{2-x}$ materials, they have failed to show expected visible light-assisted water splitting efficiency. This was ascribed to the high concentration of the surface defects and/or oxygen vacancies, considered as an electron donor to enhance donor density and improve the charge transportation in black $TiO_2$ can also act as charge recombination centers, which eventually decrease photocatalytic activity. Therefore, a black ot reducd $TiO_2$ material with optimized properties would be highly desired for visible light photocatalysis. In this report, a new controlled magnesiothermic reduction has been developed to synthesize reduced black $TiO_{2-x}$ in the presence $H_2/Ar$ for photocatalytic $H_2$ production from methanol-water system. The material possesses an optimum band gap and band position, oxygen vacancies, and surface defects and shows significantly improved optical absorption in the visible and infrared region. The synergistic effects enable the reduced $TiO_{2-x}$ material to show an excellent hydrogen production ability along with long-term stability under the full solar wavelength range of light and visible light, respectively, in the methanol-water system in the presence of Pt as a co-catalyst. These values are superior to those of previously reported black $TiO_2$ materials. On the basis of all the results, it can be realized that the outstanding activity and stability of the reduced of $TiO_{2-x}$ NPs suggest that a balanced combination of different factors like $Ti^{3+}$, surface defects, oxygen vacancy, and recombination center is achieved along with optimized bandgap and band position during the preparation employing magnesiothermic reduction in the presence of $H_2$. The controlled magnesiothermic reduction in the presence of $H_2$ is one of the best alternative ways to produce active and stable $TiO_2-based$ photocatalyst for $H_2$ production.

• Korean Journal of Environment and Ecology
• /
• v.32 no.1
• /
• pp.66-76
• /
• 2018

This study surveyed the species and population of dragonflies in 20 study sites in the Junam wetland in May and July 2015 to investigate the relationship between the dragonflies and the inhabited environment. We measured the environmental factors such as the area of emergent plants, the area of floating and floating-leaved plants, the area of water surface, the area of water plants, and the nearby land-use type and analyzed the relationship to the dragonfly species, population, and diversity index. We found 757 dragonflies belonging to 21 species of 6 families. The area of floating and floating-leaved plants and the area of water surface affected the species diversity. The area of floating and floating-leaved plants and the area of surface water, in particular, showed the positive correlation with the species richness and the dominance value, respectively. The area of water surface showed the negative correlations with Shannon's diversity index and evenness. Among the type of surrounding land-uses, the dry fields and orchards showed significantly lower average species richness than wetlands. Among the species, Cercion calamorum and Crocothemis servilia were positively correlated with floating and floating-leaved plants. Cercion v-nigrum and Epophthalmia elegans were positively correlated with the area of water surface, and Ischnura asiatica and Ceriagrion nipponicum were negatively correlated. The recent uncontrolled proliferation of lotus colony in the Junam wetland is likely to affect greatly the species composition of dragonflies which have a close relationship with plant species.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.236-236
• /
• 2008

(Bi,La)$Ti_3O_{12}$(BLT) thin film is one of the most attractive materials for ferroelectric random access memory (FRAM) applications due to its some excellent properties such as high fatigue endurance, low processing temperature, and large remanent polarization [1-2]. The authors firstly investigated and reported the damascene process of chemical mechanical polishing (CMP) for BLT thin film capacitor on behalf of plasma etching process for fabrication of FRAM [3]. CMP process could prepare the BLT capacitors with the superior process efficiency to the plasma etching process without the well-known problems such as plasma damages and sloped sidewall, which was enough to apply to the fabrication of FRAM [2]. BLT-CMP characteristics showed the typical oxide-CMP characteristics which were related in both pressure and velocity according to Preston's equation and Hernandez's power law [2-4]. Good surface roughness was also obtained for the densification of multilevel memory structure by CMP process [3]. The well prepared BLT capacitors fabricated by CMP process should have the sufficient ferroelectric properties for FRAM; therefore, in this study the electrical properties of the BLT capacitor fabricated by CMP process were analyzed with the process parameters. Especially, the effects of CMP pressure, which had mainly affected the removal rate of BLT thin films [2], on the electrical properties were investigated. In order to check the influences of the pressure in eMP process on the ferroelectric properties of BLT thin films, the electrical test of the BLT capacitors was performed. The polarization-voltage (P-V) characteristics show a decreased the remanent polarization (Pr) value when CMP process was performed with the high pressure. The shape of the hysteresis loop is close to typical loop of BLT thin films in case of the specimen after CMP process with the pressures of 4.9 kPa; however, the shape of the hysteresis loop is not saturated due to high leakage current caused by structural and/or chemical damages in case of the specimen after CMP process with the pressures of 29.4 kPa. The leakage current density obtained with positive bias is one order lower than that with negative bias in case of 29.4 kPa, which was one or two order higher than in case of 4.9 kPa. The high pressure condition was not suitable for the damascene process of BLT thin films due to the defects in electrical properties although the better efficiency of process. by higher removal rate of BLT thin films was obtained with the high pressure of 29.4 kPa in the previous study [2].

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.6
• /
• pp.476-486
• /
• 2008

Background: TRAIL (TNF-related apoptosis inducing ligand) is a newly identified member of the TNF gene family which appears to have tumor-selective cytotoxicity due to the distinct decoy receptor system. TRAIL has direct access to caspase machinery and induces apoptosis regardless of p53 phenotype. Therefore, TRAIL has a therapeutic potential in lung cancer which frequently harbors p53 mutation in more than 50% of cases. However, it was shown that TRAIL also could activates $NF-{\kappa}B$ in some cell lines which might inhibit TRAIL-induced apoptosis. This study was designed to investigate whether TRAIL can activate $NF-{\kappa}B$ in lung cancer cell lines relatively resistant to TRAIL-induced apoptosis and inhibition of $NF-{\kappa}B$ activation using proteasome inhibitor MG132 which blocks $I{\kappa}B{\alpha}$ degradation can sensitize lung cancer cells to TRAIL-induced apoptosis. Methods: A549 (wt p53) and NCI-H1299 (null p53) lung cancer cells were used and cell viability test was done by MTT assay. Apoptosis was confirmed with Annexin V assay followed by FACS analysis. To study $NF-{\kappa}B$-dependent transcriptional activation, a luciferase reporter gene assay was used after making A549 and NCI-H1299 cells stably transfected with IgG ${\kappa}-NF-{\kappa}B$ luciferase construct. To investigate DNA binding of $NF-{\kappa}B$ activated by TRAIL, electromobility shift assay was used and supershift assay was done using anti-p65 antibody. Western blot was done for the study of $I{\kappa}B{\alpha}$ degradation. Results: A549 and NCI-H1299 cells were relatively resistant to TRAIL-induced apoptosis showing only 20~30% cell death even at the concentration 100 ng/ml, but MG132 ($3{\mu}M$) pre-treatment 1 hour prior to TRAIL addition greatly increased cell death more than 80%. Luciferase assay showed TRAIL-induced $NF-{\kappa}B$ transcriptional activity in both cell lines. Electromobility shift assay demonstrated DNA binding complex of $NF-{\kappa}B$ activated by TRAIL and supershift with p65 antibody. $I{\kappa}B{\alpha}$ degradation was proven by western blot. MG132 completely blocked both TRAIL-induced $NF-{\kappa}B$ dependent luciferase activity and DNA binding of $NF-{\kappa}B$. Conclusion: This results suggest that inhibition of $NF-{\kappa}B$ can be a potentially useful strategy to enhance TRAIL-induced tumor cell killing in lung cancer.

• The Journal of Korean Society for Radiation Therapy
• /
• v.22 no.2
• /
• pp.123-129
• /
• 2010

Purpose: The purpose of this study was to evaluate dosimetric characteristics of Optically stimulated luminescent dosimeters (OSLD) for dosimetry Materials and Methods: InLight/OSL $NanoDot^{TM}$ dosimeters was used including $Inlight^{TM}MicroStar$ Reader, Solid Water Phantom, and Linear accelerator ($TRYLOGY^{(R)}$) OSLDs were placed at a Dmax in a solid water phantom and were irradiated with 100 cGy of 6 MV X-rays. Most irradiations were carried out using an SSD set up 100 cm, $10{\times}10\;cm^2$ field and 300 MU/min. The time dependence were measured at 10 minute intervals. The dose dependence were measured from 50 cGy to 600 cGy. The energy dependence was measured for nominal photon beam energies of 6, 15 MV and electron beam energies of 4-20 MeV. The dose rate dependence were also measured for dose rates of 100-1,000 MU/min. Finally, the PDD was measured by OSLDs and Ion-chamber. Results: The reproducibility of OSLD according to the Time flow was evaluated within ${\pm}2.5%$. The result of Linearity of OSLD, the dose was increased linearly up to about the 300 cGy and increased supralinearly above the 300 cGy. Energy and dose rate dependence of the response of OSL detectors were evaluated within ${\pm}2%$ and ${\pm}3%$. $PDD_{10}$ and PDD20 which were measured by OSLD was 66.7%, 38.4% and $PDD_{10}$ and $PDD_{20}$ which were measured by Ion-chamber was 66.6%, 38.3% Conclusion: As a result of analyzing characteration of OSLD, OSLD was evaluated within ${\pm}3%$ according to the change of the time, enregy and dose rate. The $PDD_{10}$ and $PDD_{20}$ are measured by OSLD and ion-chamber were evaluated within 0.3%. The OSL response is linear with a dose in the range 50~300 cGy. It was possible to repeat measurement many times and progress of the measurement of reading is easy. So the stability of the system and linear dose response relationship make it a good for dosimetry.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.350-357
• /
• 2001

This study was performed to evaluate an effect of soil water retention and chinese cabbage growth on application of super water absorbent(CPAM-AS-hyd). In seedling experiments, the CPAM-AS-hyd application rates were 0, 5 and 10kg/10a in bed soil of experimental field. The emergence percentage of chinese cabbage was increased by 9% with application of CPAM-AS-hyd otherwise emergence rates was delayed by 1 day. Water content in soil with CPAM-AS-hyd(10kg/10a) was 27.6%(v/v) at 10days after irrigation and that of control was 20.7%. The CPAM-AS-hyd application caused to alleviate wilting point by 5 days. The content of NO3-N in bed soil was increased with CPAM-AS-hyd application. In the field experiments, as the CPAM-AS-hyd application rates were 5kg/10a and 10kg $10a^{-1}$, the irrigation amounts applied during the growth periods were 1.87 ton, 1.65 ton and 1.53 ton at-0.2bar irrigation frequence and 1.38 ton, 1.25 ton and 1.15 ton at -0.5bar for growth period control, in the CPAM-AS-hyd of 5kg $10a^{-1}$ and CPAM-AS-hyd of 10kg $10a^{-1}$ plot, respectively. The CPAM-AS-hyd application caused to increase yield of chinese cabbage by 9~34% as compared to the control. The contents of $NH_4-N$ and $NO_3-N$ in soil were decreased with the CPAM-AS-hyd application in 10 days after transplanting of chinese cabbage, but the contents of those in soil were increased with the CPAM-AS-hyd application as compared to the control in 20 days after transplanting. The T-N, CaO, MgO and $K_2O$ contents in chinese cabbage increased due to the CPAM-AS-hyd application however $P_2O_5$ content was similar to the control.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.4
• /
• pp.506-521
• /
• 2007

Statement of problem: The cumulative success rate of wide implant is still controversial. Some previous reports have shown high success rate, and some other reports shown high failure rate. Purpose: The aim of this study was to analyze, and compare the biomechanics in wide implant system embeded in different width of crestal bone under different occlusal forces by finite element approach. Material and methods: Three-dimensional finite element models were created based on tracing of CT image of second premolar section of mandible with one implant embedded. One standard model (6mm-crestal bone width, 4.0mm implant diameter central position) was created. Varied crestal dimension(4, 6, 8 mm), different diameter of implants(3.3, 4.0, 5.5, 6.0mm), and buccal position implant models were generated. A 100-N vertical(L1) and 30 degree oblique load from lingual(L2) and buccal(L3) direction were applied to the occlusal surface of the crown. The analysis was performed for each load by means of the ANSYS V.9.0 program. Conclusion: 1. In all cases, maximum equivalent stress that applied $30^{\circ}$ oblique load around the alveolar bone crest was larger than that of the vertical load. Especially the equivalent stress that loaded obliquely in buccal side was larger. 2. In study of implant fixture diameter, stress around alveolar bone was decreased with the increase of implant diameter. In the vertical load, as the diameter of implant increased the equivalent stress decreased, but equivalent stress increased in case of the wide implant that have a little cortical bone in the buccal side. In the lateral oblique loading condition, the diameter of implant increased the equivalent stress decreased, but in the buccal oblique load, there was not significant difference between the 5.5mm and 6.0mm as the wide diameter implant. 3. In study of alveolar bone width, equivalent stress was decreased with the increase of alveolar bone width. In the vertical and oblique loading condition, the width of alveolar bone increased 6.0mm the equivalent stress decreased. But in the oblique loading condition, there was not a difference equivalent stress at more than 6.0mm of alveolar bone width. 4. In study of insertion position of implant fixture, even though the insertion position of implant fixture move there was not a difference equivalent stress, but in the case of little cortical bone in the buccal side, value of the equivalent stress was most unfavorable. 5. In all cases, it showed high stress around the top of fixture that contact cortical bone, but there was not a portion on the bottom of fixture that concentrate highly stress and play the role of stress dispersion. These results demonstrated that obtaining the more contact from the bucco-lingual cortical bone by installing wide diameter implant plays an important role in biomechanics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.389-396
• /
• 2014

The physiological properties of 70% ethanol extracts from Portulaca oleracea with different extraction methods (reflux extraction, RE; autoclave extraction, AE; low temperature high pressure extraction, LTPE) were investigated. The freeze-dried powder yields of RE, AE, and LTPE were 33.78%, 30.80%, and 11.05%, respectively. The color values of L and b were higher in LTPE, and the chroma values were higher in AE and LTPE compared to RE. The total polyphenolics and proanthocyanidin contents in LTPE were significantly higher than in other extracts. The amount of substances related to flavonoids contents was highest in RE (4.30 mg/g), followed by AE (4.06 mg/g), and LTPE (4.00 mg/g). DPPH radical scavenging ability with a concentration of 500 mg% (w/v) were in the following order; LTPE (88.87%)> RE (83.84%)> AE (80.67%). Further, the reducing power, ABTS radical scavenging ability, and nitrite scavenging activity was observed in the same tendency as seen with the DPPH radical scavenging ability. However, the ferrous ion chelating activity of RE (85.45%) and AE (83.88%) was significantly higher than that of LTPE (75.60%). ${\alpha}$-Glucosidase inhibitory activities of RE and LTPE with a concentration of 100 mg% were significantly higher than AE. Xanthine oxidase, and acetylcholinesterase inhibitory activities of LTPE were higher than the other extracts. These results suggest that the extracts from Portulaca oleracea have the potential to act as functional materials, and components of Portulaca oleracea could be effective in the prevention of Alzheimer's disease, and may be used to develop various functional food products.