• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.315-316
• /
• 2008

On this paper, piezoelectric generators using piezoelectric ceramics were designed and fabricated. Generators were made by attaching cymbal type metal plates on upper and bottom sides of a disc type piezoelectric ceramic. Generator converts wasting mechanical energy to electrical energy. Output voltage was increased when thickness of ceramic and displacement of vibration were increased. Temperature of the ceramic was increased when it generates, but the temperature rising was saturated at certain temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.11
• /
• pp.688-692
• /
• 2017

$Pb(Zr,\;Ti)O_3$ (PZT) is a piezoelectric material applied in a typical actuator and has been actively studied. However, in order to overcome the limitations of PZT, piezoelectric ceramics comprising mixed solid solutions of PZT with various relaxer electric materials have been studied. The $Pb(Zn_{1/3}Nb_{2/3})-Pb(Ni_{1/3}Nb_{2/3})-Pb(Zr,\;Ti)O_3$ (PZN-PNN-PZT) piezoelectric ceramic, known to have high piezoelectric constant and electromechanical coupling coefficient, was studied herein. The piezoelectric characteristics with various Zr contents (Zr/Ti ratios), PZN molar ratios, and sintering temperatures were compared. The piezoelectric properties of $d_{33}=580pC/N$ and $k_P=0.68$ were obtained with the $0.1PZN-0.2PNN-0.7PbZr_{0.46}Ti_{0.54}O_3$ composition sintered at $1,290^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.7
• /
• pp.554-558
• /
• 2011

Piezoelectric energy harvester (PEH) as a box type was fabricated in order to harvest mechanical energy imparted to roadways from passing vehicles and convert it into electricity. The PEH was composed of 72 piezoelectric cantilevers with 9 springs with elasticity stick to a bottom of the PEH. For the single piezoelectric cantilever, when a single push with approximately 5 mm displacement was incident to it, power of 0.355 mW was produced at $100\;k{\Omega}$. It is found that the power from the single piezoelectric cantilever increases when spring constant is high. We investigated power of PEH when the moving vehicle passes in it. Power was increased with increasing vehicle speed. When vehicle speed is 30 km/h, power is 20.6 mW.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.11
• /
• pp.859-864
• /
• 2011

An operation temperature of $Pb(Zr,Ti)O_3$ based piezoelectric ultrasonic flowmeter was generally restricted to below 200$^{\circ}C$ due to a low depoling temperature of its ceramic material. Thus, a new designed piezoelectric ultrasonic flowmeter was fabricated in order to protect from the extremely hot fluid. Its structure is optimized by a finite element method to effectively stop heat flowing along a waveguide. Various materials such as Cu, Al, SUS were examined as a multi-plate radiation shield to enhance the performance of piezoelectric ultrasonic flowmeter. The SUS was evaluated as the most effective material to enhance the performance of piezoelectric ultrasonic flowmeter. As the number of plates of the radiation shield increased, the temperature at piezoelectric transducer away from the hot fluid was constantly decreased with a ratio of 3.12$^{\circ}C$ per the plate number.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.30-30
• /
• 2008

Lead-free piezoelectric ceramics 0.97$(Na_{0.5}K_{0.5})NbO_3$-0.03Ba$(Ti_{1-x}Sn_x)O_3$ [NKN-BTS-x] ceramics doped with 1 mol% $MnO_2$ have been fabricated by a sintering technique with muffling. The $MnO_2$-doped NKN-BTS-x ceramics with x$\leq$0.2 have pure orthorhombic perovskite structure at room temperature. The dense microstructure was developed with grain growth as an increase of amount of Sn. Moreover, the addition of Sn was found to have a significant influence on piezoelectric properties. In particular, the $MnO_2$-doped NKN-BTS-0.1 ceramics showed improved piezoelectric properties of piezoelectric constant ($d_{33}$=145pC/N), relatively large electromechanical coupling factor ($k_p$=43%), dielectic constant (${\varepsilon}^T_{33}/{\varepsilon}_0$=676) dielectric loss (tan$\delta$=1.3%).

• Journal of the Korean Ceramic Society
• /
• v.51 no.6
• /
• pp.527-532
• /
• 2014

$0.97Bi_{0.5+x}(Na_{0.78}K_{0.22})_{0.5-3x}TiO_3-0.03LaFeO_3$ lead-free piezoelectric ceramics were fabricated by a solid state reaction method. $LaFeO_3$ additives were added to $Bi_{0.5}(Na_{0.78}K_{0.22})_{0.5}TiO_3$ for volatile compensation of bismuth and sodium ions in the sintering process. To create A-site vacancies, the mole ratio and charge valence of A-site ions ($Bi^{3+}$, $Na^+$ and $K^+$) were controlled. The improved piezoelectric properties were observed by addition of $LaFeO_3$ and control of A-site vacancies. In particular, a $d_{33}^*(S_{max}/E_{max})$ value of 614pm/V and an electric field induced strain of 0.33% was observed in $0.97Bi_{0.505}(Na_{0.78}K_{0.22})_{0.485}TiO_3-0.03LaFeO_3$ ceramic.

• KSBB Journal
• /
• v.13 no.5
• /
• pp.477-482
• /
• 1998

A biosensor with PZT piezoelectric ceramic crystal was developed for the detection of formaldehyde gas. Poled PZT piezoelectric ceramic disk was made from ZrO2, TiO2 and Nb2O5, together with the addition of PbO and polyvinyl alcohol, through various processes of mixing, calcination drying, crushing, forming, sintering, polishing, ion coating and poling. Oscillator circuit of sensor was made of operational amplifier(AD811AN). Formaldehyde dehydrogenase was immobilized onto a piezoelectic ceramic crystal, together with the cofactors, reduced glutathione and nicotinamide adenine dinucleotide. The effect of flow rate on the sensitivity was determined by varing the flow rate of carrier gas from 24.7mL/min to 111.7mL/min through detector cell. The results indicated that as the flow rate was increased, the recovery rate was increased. And a significant increase in the sensitivity was observed in enhanced flow rate of carrier gas. Frequency difference(ΔF) of immobilized PZT piezoelectic disk increased proportionally to the concentration gas and reproduced to repeated exposures of formaldehyde gas(28ppm, Δ68Hz).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1989.06a
• /
• pp.63-65
• /
• 1989

Piezoelectric BaTiO$_3$-polymer composite were investigated for dielectric and piezoelectric properties with the barium titanate active particle size. Under the condition of the same density and ceramic volume ratio of composite, the dielectric and piezoelectric constant of composite are increasing as the ceramic particle size in composite are increasing. The surface layer model was quoted to explain these phenomena in our system and experimentally confirmed. The connectivity parameter of modified cube model of composite was calculated from the dielectric constant variation as their particle size. The connectivity parameter X and Y were 77.8% and 98.9% respectively. It means that the barium titanate particle distribution in composite nearly approach to the parallel mode. It was experimentally confirmed that the surface layer has low dielectric and nonferroelectric properties. Dielectric constant and thickness of surface layer were calculated from the equivalent circuit of composite.

• Journal of the Korean Ceramic Society
• /
• v.36 no.11
• /
• pp.1183-1188
• /
• 1999

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.216-220
• /
• 2004

This paper is concerned with the development of stacked ceramic thin actuation layer IDEAL (InterDigitated Electrode Actuation Layer) using d$_{33}$ actuation mechanism of piezoelectric ceramic. Most of the thin piezoelectric actuators are operated with d$_{31}$ actuation mechanism. Many kinds of piezoelectric ceramic actuators are strived now to improve the actuation performance. One of efforts to improve performance of piezoceramic actuators is the research trying to develop an actuator using the piezoelectric coefficient d$_{33}$ . The piezoelectric coefficient d$_{33}$ is almost twice larger than piezoelectric coefficient d$_{31}$ . Therefore, the induced strain of PZT thin layer with d$_{33}$ 3 actuation mechanism is bigger than that with d$_{31}$ actuation mechanism. The AFC(MIT) and LaRC-MFC$^{TM}$ which is developed by a research team of NASA Langley Research Center used d$_{33}$ actuation mechanism with surface interdigitated electrode to enhance its actuation performance. But their actuation mechanism is not perfect d$_{33}$ actuation mechanism since the interdigitated electrodes are placed at the surface of the actuation layer. In this research, the stacked ceramic thin actuation layer with imbedded interdigitated electrode is designed and manufactured. The actuation strain of stacked ceramic thin actuation layer is measured and compared with the actuation strain of the LaRC-MFC$^{TM}$. The comparison shows that the developed stacked ceramic thin actuation layer can produce 15% more actuation strain than LaRC-MFC$^{TM}$.> TM/.